diff --git a/setup/HID.cpp b/setup/HID.cpp
new file mode 100644
index 0000000..21ede26
--- /dev/null
+++ b/setup/HID.cpp
@@ -0,0 +1,162 @@
+/*
+   Copyright (c) 2015, Arduino LLC
+   Original code (pre-library): Copyright (c) 2011, Peter Barrett
+
+   Permission to use, copy, modify, and/or distribute this software for
+   any purpose with or without fee is hereby granted, provided that the
+   above copyright notice and this permission notice appear in all copies.
+
+   THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+   WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+   WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
+   BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
+   OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+   WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+   ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+   SOFTWARE.
+ */
+
+#include "HID.h"
+
+#if defined(USBCON)
+
+HID_& HID()
+{
+	static HID_ obj;
+	return obj;
+}
+
+int HID_::getInterface(uint8_t* interfaceCount)
+{
+	*interfaceCount += 1; // uses 1
+	HIDDescriptor hidInterface = {
+		D_INTERFACE(pluggedInterface, 1, USB_DEVICE_CLASS_HUMAN_INTERFACE, HID_SUBCLASS_NONE, HID_PROTOCOL_NONE),
+		D_HIDREPORT(descriptorSize),
+		D_ENDPOINT(USB_ENDPOINT_IN(pluggedEndpoint), USB_ENDPOINT_TYPE_INTERRUPT, USB_EP_SIZE, 0x01)
+	};
+	return USB_SendControl(0, &hidInterface, sizeof(hidInterface));
+}
+
+int HID_::getDescriptor(USBSetup& setup)
+{
+	// Check if this is a HID Class Descriptor request
+	if (setup.bmRequestType != REQUEST_DEVICETOHOST_STANDARD_INTERFACE) { return 0; }
+	if (setup.wValueH != HID_REPORT_DESCRIPTOR_TYPE) { return 0; }
+
+	// In a HID Class Descriptor wIndex cointains the interface number
+	if (setup.wIndex != pluggedInterface) { return 0; }
+
+	int total = 0;
+	HIDSubDescriptor* node;
+	for (node = rootNode; node; node = node->next) {
+		int res = USB_SendControl(TRANSFER_PGM, node->data, node->length);
+		if (res == -1)
+			return -1;
+		total += res;
+	}
+	
+	// Reset the protocol on reenumeration. Normally the host should not assume the state of the protocol
+	// due to the USB specs, but Windows and Linux just assumes its in report mode.
+	protocol = HID_REPORT_PROTOCOL;
+	
+	return total;
+}
+
+uint8_t HID_::getShortName(char *name)
+{
+	name[0] = 'H';
+	name[1] = 'I';
+	name[2] = 'D';
+	name[3] = 'A' + (descriptorSize & 0x0F);
+	name[4] = 'A' + ((descriptorSize >> 4) & 0x0F);
+	return 5;
+}
+
+void HID_::AppendDescriptor(HIDSubDescriptor *node)
+{
+	if (!rootNode) {
+		rootNode = node;
+	} else {
+		HIDSubDescriptor *current = rootNode;
+		while (current->next) {
+			current = current->next;
+		}
+		current->next = node;
+	}
+	descriptorSize += node->length;
+}
+
+int HID_::SendReport(uint8_t id, const void* data, int len)
+{
+	auto ret = USB_Send(pluggedEndpoint, &id, 1);
+	if (ret < 0) return ret;
+	auto ret2 = USB_Send(pluggedEndpoint | TRANSFER_RELEASE, data, len);
+	if (ret2 < 0) return ret2;
+	return ret + ret2;
+}
+
+bool HID_::setup(USBSetup& setup)
+{
+	if (pluggedInterface != setup.wIndex) {
+		return false;
+	}
+
+	uint8_t request = setup.bRequest;
+	uint8_t requestType = setup.bmRequestType;
+
+	if (requestType == REQUEST_DEVICETOHOST_CLASS_INTERFACE)
+	{
+		if (request == HID_GET_REPORT) {
+			// TODO: HID_GetReport();
+			return true;
+		}
+		if (request == HID_GET_PROTOCOL) {
+			// TODO: Send8(protocol);
+			return true;
+		}
+		if (request == HID_GET_IDLE) {
+			// TODO: Send8(idle);
+		}
+	}
+
+	if (requestType == REQUEST_HOSTTODEVICE_CLASS_INTERFACE)
+	{
+		if (request == HID_SET_PROTOCOL) {
+			// The USB Host tells us if we are in boot or report mode.
+			// This only works with a real boot compatible device.
+			protocol = setup.wValueL;
+			return true;
+		}
+		if (request == HID_SET_IDLE) {
+			idle = setup.wValueL;
+			return true;
+		}
+		if (request == HID_SET_REPORT)
+		{
+			//uint8_t reportID = setup.wValueL;
+			//uint16_t length = setup.wLength;
+			//uint8_t data[length];
+			// Make sure to not read more data than USB_EP_SIZE.
+			// You can read multiple times through a loop.
+			// The first byte (may!) contain the reportID on a multreport.
+			//USB_RecvControl(data, length);
+		}
+	}
+
+	return false;
+}
+
+HID_::HID_(void) : PluggableUSBModule(1, 1, epType),
+                   rootNode(NULL), descriptorSize(0),
+                   protocol(HID_REPORT_PROTOCOL), idle(1)
+{
+	epType[0] = EP_TYPE_INTERRUPT_IN;
+	PluggableUSB().plug(this);
+}
+
+int HID_::begin(void)
+{
+	return 0;
+}
+
+#endif /* if defined(USBCON) */
diff --git a/setup/HID.h b/setup/HID.h
new file mode 100644
index 0000000..e886094
--- /dev/null
+++ b/setup/HID.h
@@ -0,0 +1,127 @@
+/*
+  Copyright (c) 2015, Arduino LLC
+  Original code (pre-library): Copyright (c) 2011, Peter Barrett
+
+  Permission to use, copy, modify, and/or distribute this software for
+  any purpose with or without fee is hereby granted, provided that the
+  above copyright notice and this permission notice appear in all copies.
+
+  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+  WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+  WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
+  BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
+  OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+  WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+  ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+  SOFTWARE.
+ */
+
+#ifndef HID_h
+#define HID_h
+
+#include <stdint.h>
+#include <Arduino.h>
+#include "PluggableUSB.h"
+
+#if defined(USBCON)
+
+#define _USING_HID
+
+// HID 'Driver'
+// ------------
+#define HID_GET_REPORT        0x01
+#define HID_GET_IDLE          0x02
+#define HID_GET_PROTOCOL      0x03
+#define HID_SET_REPORT        0x09
+#define HID_SET_IDLE          0x0A
+#define HID_SET_PROTOCOL      0x0B
+
+#define HID_HID_DESCRIPTOR_TYPE         0x21
+#define HID_REPORT_DESCRIPTOR_TYPE      0x22
+#define HID_PHYSICAL_DESCRIPTOR_TYPE    0x23
+
+// HID subclass HID1.11 Page 8 4.2 Subclass
+#define HID_SUBCLASS_NONE 0
+#define HID_SUBCLASS_BOOT_INTERFACE 1
+
+// HID Keyboard/Mouse bios compatible protocols HID1.11 Page 9 4.3 Protocols
+#define HID_PROTOCOL_NONE 0
+#define HID_PROTOCOL_KEYBOARD 1
+#define HID_PROTOCOL_MOUSE 2
+
+// Normal or bios protocol (Keyboard/Mouse) HID1.11 Page 54 7.2.5 Get_Protocol Request
+// "protocol" variable is used for this purpose.
+#define HID_BOOT_PROTOCOL	0
+#define HID_REPORT_PROTOCOL	1
+
+// HID Request Type HID1.11 Page 51 7.2.1 Get_Report Request
+#define HID_REPORT_TYPE_INPUT   1
+#define HID_REPORT_TYPE_OUTPUT  2
+#define HID_REPORT_TYPE_FEATURE 3
+
+typedef struct
+{
+  uint8_t len;      // 9
+  uint8_t dtype;    // 0x21
+  uint8_t addr;
+  uint8_t versionL; // 0x101
+  uint8_t versionH; // 0x101
+  uint8_t country;
+  uint8_t desctype; // 0x22 report
+  uint8_t descLenL;
+  uint8_t descLenH;
+} HIDDescDescriptor;
+
+typedef struct 
+{
+  InterfaceDescriptor hid;
+  HIDDescDescriptor   desc;
+  EndpointDescriptor  in;
+} HIDDescriptor;
+
+class HIDSubDescriptor {
+public:
+  HIDSubDescriptor *next = NULL;
+  HIDSubDescriptor(const void *d, const uint16_t l) : data(d), length(l) { }
+
+  const void* data;
+  const uint16_t length;
+};
+
+class HID_ : public PluggableUSBModule
+{
+public:
+  HID_(void);
+  int begin(void);
+  int SendReport(uint8_t id, const void* data, int len);
+  int SendRaw(const void* data, int len);
+  void AppendDescriptor(HIDSubDescriptor* node);
+  void PrependDescriptor(HIDSubDescriptor* node);
+
+protected:
+  // Implementation of the PluggableUSBModule
+  int getInterface(uint8_t* interfaceCount);
+  int getDescriptor(USBSetup& setup);
+  bool setup(USBSetup& setup);
+  uint8_t getShortName(char* name);
+
+private:
+  uint8_t epType[1];
+
+  HIDSubDescriptor* rootNode;
+  uint16_t descriptorSize;
+
+  uint8_t protocol;
+  uint8_t idle;
+};
+
+// Replacement for global singleton.
+// This function prevents static-initialization-order-fiasco
+// https://isocpp.org/wiki/faq/ctors#static-init-order-on-first-use
+HID_& HID();
+
+#define D_HIDREPORT(length) { 9, 0x21, 0x01, 0x01, 0, 1, 0x22, lowByte(length), highByte(length) }
+
+#endif // USBCON
+
+#endif // HID_h
diff --git a/setup/boards.txt b/setup/boards.txt
new file mode 100644
index 0000000..69293fc
--- /dev/null
+++ b/setup/boards.txt
@@ -0,0 +1,38 @@
+
+##############################################################
+#       Nintendo Switch Controller for Micro/Leonardo        #
+##############################################################
+
+ns_con.name=Nintendo Switch Controller (Micro)
+
+ns_con.vid.1=0x0F0D
+ns_con.pid.1=0x0092
+
+ns_con.upload.tool=avrdude
+ns_con.upload.protocol=avr109
+ns_con.upload.maximum_size=28672
+ns_con.upload.maximum_data_size=2560
+ns_con.upload.speed=57600
+ns_con.upload.disable_flushing=true
+ns_con.upload.use_1200bps_touch=true
+ns_con.upload.wait_for_upload_port=true
+
+ns_con.bootloader.tool=avrdude
+ns_con.bootloader.low_fuses=0xff
+ns_con.bootloader.high_fuses=0xd8
+ns_con.bootloader.extended_fuses=0xcb
+ns_con.bootloader.file=caterina/Caterina-Micro.hex
+ns_con.bootloader.unlock_bits=0x3F
+ns_con.bootloader.lock_bits=0x2F
+
+ns_con.build.mcu=atmega32u4
+ns_con.build.f_cpu=16000000L
+ns_con.build.board=AVR_MICRO
+ns_con.build.core=arduino
+ns_con.build.variant=micro
+
+ns_con.build.vid=0x0F0D
+ns_con.build.pid=0x0092
+ns_con.build.usb_manufacturer="HORI CO.,LTD."
+ns_con.build.usb_product="POKKEN CONTROLLER"
+ns_con.build.extra_flags={build.usb_flags}