This commit is contained in:
Xun Zhang 2024-01-26 23:26:38 -08:00
parent 56a379b7c4
commit e107e8c907
6 changed files with 324 additions and 161 deletions

View File

@ -1,166 +1,25 @@
// Enable this mode to pass raw analog data to the game without any post- /********************************************************
// processing.
// The game has a built-in mechanism to calculate which sensor is triggered
// and the force of the hit, so it's recommended to enable this mode.
// This also the provides the most similar experience with the arcade.
// If turned on, the microcontroller will ony do a fast sigle-pass convolution
// over the piezoelectric sensors' inputs, and then pass the data to the game
// directly.
#define RAW_ANALOG_MODE 1
#define PLAYERS 2 ESP32 is not fast enough to process 16 channels of input
#define CHANNELS 4 simultaneously, so you can choose one of the 2 modes:
// SAMPLE_CACHE_LENGTH must be power of 2 (8, 16, 32, etc.) - MODE_TWO_PLAYERS: Allows the controller to connect 2
// See cache.h for implementation drums, but the sensitivity values are flashed to the
#define SAMPLE_CACHE_LENGTH 16 board so you can't adjust them without re-flash the
firmware. If you use the provided board, connect the
2 drums and ignore the adjustable resistors.
// The maximum value of a hit (not the minumum value to trigger a heavy hit) - MODE_ADJUSTABLE: Allows you to adjust the sensitivity
// To configure the light and heavy thresholds, do it in the game settings values with the potentiometer as you play, but only
#define MAX_THRES 5000 the P1 side of the board will be enabled (you can
configurate it as 1P or 2P in Params.h file).
#if !RAW_ANALOG_MODE **********************************************************/
// The minimum value to trigger a light hit
#define HIT_THRES 1000
// If the reset time is too short, the game may not be able to #define MODE_TWO_PLAYERS
// receive the input. From testing I found 40 seems to be the
// minimum value so that the game won't miss any hit. If the game #ifdef MODE_TWO_PLAYERS
// occassionally miss the drum input, increase this value #include "two_players.h"
#define RESET_TIME 40 #elif defined(MODE_ADJUSTABLE)
#include "adjustable.h"
#endif #endif
// Sensitivity multipliers for each channel, 1.0 as the baseline
#define P1_L_DON_SENS 1.0
#define P1_L_KAT_SENS 1.0
#define P1_R_DON_SENS 1.0
#define P1_R_KAT_SENS 1.0
#define P2_L_DON_SENS 1.0
#define P2_L_KAT_SENS 1.0
#define P2_R_DON_SENS 1.0
#define P2_R_KAT_SENS 1.0
// Input pins for each channel
#define P1_L_DON_IN 4
#define P1_L_KAT_IN 5
#define P1_R_DON_IN 6
#define P1_R_KAT_IN 7
#define P2_L_DON_IN 8
#define P2_L_KAT_IN 1
#define P2_R_DON_IN 9
#define P2_R_KAT_IN 10
#define AXIS_RANGE 1023
#include "USB.h"
#include "Joystick_ESP32S2.h"
#include "cache.h"
const byte inPins[PLAYERS][CHANNELS] = {
P1_L_DON_IN, P1_L_KAT_IN, P1_R_DON_IN, P1_R_KAT_IN,
P2_L_DON_IN, P2_L_KAT_IN, P2_R_DON_IN, P2_R_KAT_IN
};
const float sensitivities[PLAYERS][CHANNELS] = {
P1_L_DON_SENS, P1_L_KAT_SENS, P1_R_DON_SENS, P1_R_KAT_SENS,
P2_L_DON_SENS, P2_L_KAT_SENS, P2_R_DON_SENS, P2_R_KAT_SENS
};
Cache<int, SAMPLE_CACHE_LENGTH> inputWindow[PLAYERS][CHANNELS];
unsigned long power[PLAYERS][CHANNELS];
#if !RAW_ANALOG_MODE
unsigned long lastPower[PLAYERS][CHANNELS];
bool triggered[PLAYERS];
unsigned long triggeredTime[PLAYERS][CHANNELS];
int outputValue[PLAYERS] = {0, 0};
uint resetTimer[PLAYERS] = {0, 0};
short maxIndex[PLAYERS] = {0, 0};
float maxPower[PLAYERS] = {0, 0};
#endif
uint axisValues[PLAYERS][CHANNELS] = {0, 0, 0, 0, 0, 0, 0, 0};
Joystick_ Joystick(JOYSTICK_DEFAULT_REPORT_ID, JOYSTICK_TYPE_GAMEPAD, 10, 4,
true, true, false, true, true, false,
false, false, false, false, false);
void setup() {
for (byte p = 0; p < PLAYERS; p++) {
for (byte i = 0; i < CHANNELS; i++) {
power[p][i] = 0;
#if !RAW_ANALOG_MODE
lastPower[p][i] = 0;
triggered[p] = false;
#endif
pinMode(inPins[p][i], INPUT);
}
#if !RAW_ANALOG_MODE
maxIndex[p] = -1;
maxPower[p] = 0;
#endif
}
USB.PID(0x4869);
USB.VID(0x4869);
USB.productName("Taiko Controller");
USB.manufacturerName("GitHub Community");
USB.begin();
Joystick.begin(false);
Joystick.setXAxisRange(-AXIS_RANGE, AXIS_RANGE);
Joystick.setYAxisRange(-AXIS_RANGE, AXIS_RANGE);
Joystick.setRxAxisRange(-AXIS_RANGE, AXIS_RANGE);
Joystick.setRyAxisRange(-AXIS_RANGE, AXIS_RANGE);
}
void loop() {
for (byte p = 0; p < PLAYERS; p++) {
for (byte i = 0; i < CHANNELS; i++) {
inputWindow[p][i].put(analogRead(inPins[p][i]));
power[p][i] = power[p][i] - inputWindow[p][i].get(1) + inputWindow[p][i].get();
#if !RAW_ANALOG_MODE
if (lastPower[p][i] > maxPower[p] && power[p][i] < lastPower[p][i]) {
maxPower[p] = lastPower[p][i];
maxIndex[p] = i;
}
lastPower[p][i] = power[p][i];
#else
float v = power[p][i] * sensitivities[p][i];
axisValues[p][i] = AXIS_RANGE * (v >= MAX_THRES ? 1 : (v / MAX_THRES));
#endif
}
#if !RAW_ANALOG_MODE
if (!triggered[p] && maxPower[p] >= HIT_THRES) {
triggered[p] = true;
outputValue[p] = (int)(AXIS_RANGE * (maxPower[p] >= MAX_THRES ? 1 : maxPower[p] / MAX_THRES));
}
if (triggered[p] && resetTimer[p] >= RESET_TIME) {
triggered[p] = false;
resetTimer[p] = 0;
maxPower[p] = 0;
maxIndex[p] = -1;
outputValue[p] = 0;
}
for (byte i = 0; i < CHANNELS; i++) {
if (triggered[p] && i == maxIndex[p]) {
axisValues[p][i] = outputValue[p];
} else {
axisValues[p][i] = 0;
}
}
if (triggered[p]) {
resetTimer[p]++;
}
#endif
}
Joystick.setXAxis(axisValues[0][0] > axisValues[0][1] ? axisValues[0][0] : -axisValues[0][1]);
Joystick.setYAxis(axisValues[0][2] > axisValues[0][3] ? axisValues[0][2] : -axisValues[0][3]);
Joystick.setRxAxis(axisValues[1][0] > axisValues[1][1] ? axisValues[1][0] : -axisValues[1][1]);
Joystick.setRyAxis(axisValues[1][2] > axisValues[1][3] ? axisValues[1][2] : -axisValues[1][3]);
Joystick.sendState();
}

View File

@ -0,0 +1,122 @@
#include "params.h"
const byte inPins[CHANNELS] = {
P1_L_DON_IN, P1_L_KAT_IN, P1_R_DON_IN, P1_R_KAT_IN
};
const byte sensitivityPins[CHANNELS] = {
P1_L_DON_SENS, P1_L_KAT_SENS, P1_R_DON_SENS, P1_R_KAT_SENS
};
Cache<int, SAMPLE_CACHE_LENGTH> inputWindow[CHANNELS];
unsigned long power[CHANNELS];
#ifndef RAW_ANALOG_MODE
unsigned long lastPower[PLAYERS][CHANNELS];
bool triggered[PLAYERS];
unsigned long triggeredTime[PLAYERS][CHANNELS];
int outputValue[PLAYERS] = {0, 0};
uint resetTimer[PLAYERS] = {0, 0};
short maxIndex[PLAYERS] = {0, 0};
float maxPower[PLAYERS] = {0, 0};
#endif
uint axisValues[CHANNELS] = {0, 0, 0, 0};
Joystick_ Joystick(JOYSTICK_DEFAULT_REPORT_ID, JOYSTICK_TYPE_GAMEPAD, 10, 4,
true, true, false, true, true, false,
false, false, false, false, false);
void setup() {
for (byte i = 0; i < CHANNELS; i++) {
power[i] = 0;
#ifndef RAW_ANALOG_MODE
lastPower[i] = 0;
triggered = false;
#endif
pinMode(inPins[i], INPUT);
pinMode(sensitivityPins[i], INPUT);
}
#ifndef RAW_ANALOG_MODE
maxIndex = -1;
maxPower = 0;
#endif
USB.PID(0x4869);
USB.VID(0x4869);
USB.productName("Taiko Controller");
USB.manufacturerName("GitHub Community");
USB.begin();
Joystick.begin(false);
Joystick.setXAxisRange(-AXIS_RANGE, AXIS_RANGE);
Joystick.setYAxisRange(-AXIS_RANGE, AXIS_RANGE);
Joystick.setRxAxisRange(-AXIS_RANGE, AXIS_RANGE);
Joystick.setRyAxisRange(-AXIS_RANGE, AXIS_RANGE);
}
void loop() {
for (byte i = 0; i < CHANNELS; i++) {
inputWindow[i].put(analogRead(inPins[i]));
power[i] = power[i] - inputWindow[i].get(1) + inputWindow[i].get();
#ifndef RAW_ANALOG_MODE
if (lastPower[i] > maxPower && power[i] < lastPower[i]) {
maxPower = lastPower[i];
maxIndex = i;
}
lastPower[i] = power[i];
#else
float x = analogRead(sensitivityPins[i]) / 2048.0 - 1;
float x2 = x * x;
float x3 = x2 * x;
float x4 = x3 * x;
float v = (1.0 + x + 0.5 * x2 + 0.166667 * x3) * power[i];
axisValues[i] = AXIS_RANGE * (v >= MAX_THRES ? 1 : (v / MAX_THRES));
#endif
}
#ifndef RAW_ANALOG_MODE
if (!triggered && maxPower >= HIT_THRES) {
triggered = true;
digitalWrite(outPins[maxIndex], HIGH);
outputValue = (int)(AXIS_RANGE * (maxPower >= MAX_THRES ? 1 : maxPower / MAX_THRES));
}
if (triggered && resetTimer >= RESET_TIME) {
triggered = false;
resetTimer = 0;
digitalWrite(outPins[maxIndex], LOW);
maxPower = 0;
maxIndex = -1;
outputValue = 0;
}
for (byte i = 0; i < CHANNELS; i++) {
if (triggered && i == maxIndex) {
axisValues[i] = outputValue;
} else {
axisValues[i] = 0;
}
}
if (triggered) {
resetTimer++;
}
#endif
#if PLAYER_SELECT == 1
Joystick.setXAxis(axisValues[0] > axisValues[1] ? axisValues[0] : -axisValues[1]);
Joystick.setYAxis(axisValues[2] > axisValues[3] ? axisValues[2] : -axisValues[3]);
Joystick.setRxAxis(0);
Joystick.setRyAxis(0);
#elif PLAYER_SELECT == 2
Joystick.setXAxis(0);
Joystick.setYAxis(0);
Joystick.setRxAxis(axisValues[0] > axisValues[1] ? axisValues[0] : -axisValues[1]);
Joystick.setRyAxis(axisValues[2] > axisValues[3] ? axisValues[2] : -axisValues[3]);
#else
Joystick.setXAxis(0);
Joystick.setYAxis(0);
Joystick.setRxAxis(0);
Joystick.setRyAxis(0);
#endif
Joystick.sendState();
}

View File

@ -20,7 +20,7 @@
Edited by Schnoog to make it running on ESP32-S2/s3 devices Edited by Schnoog to make it running on ESP32-S2/s3 devices
*/ */
#include "Joystick_ESP32S2.h" #include "joystick.h"
#define JOYSTICK_REPORT_ID_INDEX 7 #define JOYSTICK_REPORT_ID_INDEX 7
#define JOYSTICK_AXIS_MINIMUM 0 #define JOYSTICK_AXIS_MINIMUM 0

72
ESP32-S3-Analog/params.h Normal file
View File

@ -0,0 +1,72 @@
// Enable this mode to pass raw analog data to the game without any post-
// processing.
// The game has a built-in mechanism to calculate which sensor is triggered
// and the force of the hit, so it's recommended to enable this mode.
// This also the provides the most similar experience with the arcade.
// To disable this mode, remove or comment out this line
#define RAW_ANALOG_MODE
// For MODE_ADJUSTABLE
// Select which player this board is. 1 for P1 and 2 for P2.
#define PLAYER_SELECT 1
// For MODE_TWO_PLAYERS
// Sensitivity multipliers for each channel, 1.0 as the baseline.
#define P1_L_DON_SENS 1.0
#define P1_L_KAT_SENS 1.0
#define P1_R_DON_SENS 1.0
#define P1_R_KAT_SENS 1.0
#define P2_L_DON_SENS 1.0
#define P2_L_KAT_SENS 1.0
#define P2_R_DON_SENS 1.0
#define P2_R_KAT_SENS 1.0
/********************************************************
CHANGING THE FOLLOWING PARAMETERS ARE NOT RECOMMENDED
UNLESS YOU KNOW HOW THEY WORKS
**********************************************************/
// Cache length must be the power of 2 (8, 16, 32, etc.)
// See cache.h for the reason
#define SAMPLE_CACHE_LENGTH 32
// The maximum value of a hit (not the minumum value to trigger a heavy hit)
// To configure the light and heavy thresholds, do it in the game settings
#define MAX_THRES 5000
// Input pins for each channel
#define P1_L_DON_IN 4
#define P1_L_KAT_IN 5
#define P1_R_DON_IN 6
#define P1_R_KAT_IN 7
#define P2_L_DON_IN 8
#define P2_L_KAT_IN 1
#define P2_R_DON_IN 9
#define P2_R_KAT_IN 10
// Sensitivity adjustment potentiometer input pins
#define P1_L_DON_SENS 15
#define P1_L_KAT_SENS 16
#define P1_R_DON_SENS 17
#define P1_R_KAT_SENS 18
#define AXIS_RANGE 1023
#define PLAYERS 2
#define CHANNELS 4
#ifndef RAW_ANALOG_MODE
// The minimum value to trigger a light hit
#define HIT_THRES 1000
// If the reset time is too short, the game may not be able to
// receive the input. From testing I found 40 seems to be the
// minimum value so that the game won't miss any hit. If the game
// occassionally miss the drum input, increase this value
#define RESET_TIME 40
#endif
#include <USB.h>
#include "joystick.h"
#include "cache.h"

View File

@ -0,0 +1,110 @@
#include "params.h"
const byte inPins[PLAYERS][CHANNELS] = {
P1_L_DON_IN, P1_L_KAT_IN, P1_R_DON_IN, P1_R_KAT_IN,
P2_L_DON_IN, P2_L_KAT_IN, P2_R_DON_IN, P2_R_KAT_IN
};
const float sensitivities[PLAYERS][CHANNELS] = {
P1_L_DON_SENS, P1_L_KAT_SENS, P1_R_DON_SENS, P1_R_KAT_SENS,
P2_L_DON_SENS, P2_L_KAT_SENS, P2_R_DON_SENS, P2_R_KAT_SENS
};
Cache<int, SAMPLE_CACHE_LENGTH> inputWindow[PLAYERS][CHANNELS];
unsigned long power[PLAYERS][CHANNELS];
#ifndef RAW_ANALOG_MODE
unsigned long lastPower[PLAYERS][CHANNELS];
bool triggered[PLAYERS];
unsigned long triggeredTime[PLAYERS][CHANNELS];
int outputValue[PLAYERS] = {0, 0};
uint resetTimer[PLAYERS] = {0, 0};
short maxIndex[PLAYERS] = {0, 0};
float maxPower[PLAYERS] = {0, 0};
#endif
uint axisValues[PLAYERS][CHANNELS] = {0, 0, 0, 0, 0, 0, 0, 0};
Joystick_ Joystick(JOYSTICK_DEFAULT_REPORT_ID, JOYSTICK_TYPE_GAMEPAD, 10, 4,
true, true, false, true, true, false,
false, false, false, false, false);
void setup() {
for (byte p = 0; p < PLAYERS; p++) {
for (byte i = 0; i < CHANNELS; i++) {
power[p][i] = 0;
#ifndef RAW_ANALOG_MODE
lastPower[p][i] = 0;
triggered[p] = false;
#endif
pinMode(inPins[p][i], INPUT);
}
#ifndef RAW_ANALOG_MODE
maxIndex[p] = -1;
maxPower[p] = 0;
#endif
}
USB.PID(0x4869);
USB.VID(0x4869);
USB.productName("Taiko Controller");
USB.manufacturerName("GitHub Community");
USB.begin();
Joystick.begin(false);
Joystick.setXAxisRange(-AXIS_RANGE, AXIS_RANGE);
Joystick.setYAxisRange(-AXIS_RANGE, AXIS_RANGE);
Joystick.setRxAxisRange(-AXIS_RANGE, AXIS_RANGE);
Joystick.setRyAxisRange(-AXIS_RANGE, AXIS_RANGE);
}
void loop() {
for (byte p = 0; p < PLAYERS; p++) {
for (byte i = 0; i < CHANNELS; i++) {
inputWindow[p][i].put(analogRead(inPins[p][i]));
power[p][i] = power[p][i] - inputWindow[p][i].get(1) + inputWindow[p][i].get();
#ifndef RAW_ANALOG_MODE
if (lastPower[p][i] > maxPower[p] && power[p][i] < lastPower[p][i]) {
maxPower[p] = lastPower[p][i];
maxIndex[p] = i;
}
lastPower[p][i] = power[p][i];
#else
float v = power[p][i] * sensitivities[p][i];
axisValues[p][i] = AXIS_RANGE * (v >= MAX_THRES ? 1 : (v / MAX_THRES));
#endif
}
#ifndef RAW_ANALOG_MODE
if (!triggered[p] && maxPower[p] >= HIT_THRES) {
triggered[p] = true;
outputValue[p] = (int)(AXIS_RANGE * (maxPower[p] >= MAX_THRES ? 1 : maxPower[p] / MAX_THRES));
}
if (triggered[p] && resetTimer[p] >= RESET_TIME) {
triggered[p] = false;
resetTimer[p] = 0;
maxPower[p] = 0;
maxIndex[p] = -1;
outputValue[p] = 0;
}
for (byte i = 0; i < CHANNELS; i++) {
if (triggered[p] && i == maxIndex[p]) {
axisValues[p][i] = outputValue[p];
} else {
axisValues[p][i] = 0;
}
}
if (triggered[p]) {
resetTimer[p]++;
}
#endif
}
Joystick.setXAxis(axisValues[0][0] > axisValues[0][1] ? axisValues[0][0] : -axisValues[0][1]);
Joystick.setYAxis(axisValues[0][2] > axisValues[0][3] ? axisValues[0][2] : -axisValues[0][3]);
Joystick.setRxAxis(axisValues[1][0] > axisValues[1][1] ? axisValues[1][0] : -axisValues[1][1]);
Joystick.setRyAxis(axisValues[1][2] > axisValues[1][3] ? axisValues[1][2] : -axisValues[1][3]);
Joystick.sendState();
}