mirror of
https://github.com/ShikyC/Taiko-Drum-Controller-Arduino.git
synced 2024-11-12 00:50:46 +01:00
108 lines
2.6 KiB
C++
108 lines
2.6 KiB
C++
#define CHANNELS 4
|
|
|
|
// SAMPLE_CACHE_LENGTH must be power of 2 (8, 16, 32, etc.)
|
|
// See cache.h for implementation
|
|
#define SAMPLE_CACHE_LENGTH 16
|
|
|
|
// The thresholds are also dependent on SAMPLE_CACHE_LENGTH, if you
|
|
// changed SAMPLE_CACHE_LENGTH, you should also adjust thresholds
|
|
#define HIT_THRES 750
|
|
#define RESET_THRES 200
|
|
|
|
// Sensitivity multipliers for each channel, 1.0 as the baseline
|
|
#define L_DON_SENS 1.0
|
|
#define L_KAT_SENS 1.0
|
|
#define R_DON_SENS 1.0
|
|
#define R_KAT_SENS 1.0
|
|
|
|
// Input pins for each channel
|
|
#define L_DON_IN A0
|
|
#define L_KAT_IN A1
|
|
#define R_DON_IN A2
|
|
#define R_KAT_IN A3
|
|
|
|
// Output LED pins for each channel (just for visualization)
|
|
#define L_DON_LED 5
|
|
#define L_KAT_LED 6
|
|
#define R_DON_LED 7
|
|
#define R_KAT_LED 8
|
|
|
|
// Keyboard output for each channel
|
|
#define L_DON_KEY 'f'
|
|
#define L_KAT_KEY 'd'
|
|
#define R_DON_KEY 'j'
|
|
#define R_KAT_KEY 'k'
|
|
|
|
// Enable debug mode to view analog input values from the Serial
|
|
// Enabling this also disables the keyboard simulation
|
|
#define DEBUG 0
|
|
|
|
#include <Keyboard.h>
|
|
#include <limits.h>
|
|
|
|
#include "cache.h"
|
|
|
|
Cache<int, SAMPLE_CACHE_LENGTH> inputWindow[CHANNELS];
|
|
unsigned long power[CHANNELS];
|
|
unsigned long lastPower[CHANNELS];
|
|
|
|
bool triggered;
|
|
unsigned long triggeredTime[CHANNELS];
|
|
|
|
const byte inPins[] = {L_DON_IN, L_KAT_IN, R_DON_IN, R_KAT_IN};
|
|
const byte outPins[] = {L_DON_LED, L_KAT_LED, R_DON_LED, R_KAT_LED};
|
|
const char outKeys[] = {L_DON_KEY, L_KAT_KEY, R_DON_KEY, R_KAT_KEY};
|
|
float sensitivities[] = {L_DON_SENS, L_KAT_SENS, R_DON_SENS, R_KAT_SENS};
|
|
|
|
short maxIndex;
|
|
float maxPower;
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
Keyboard.begin();
|
|
analogReference(DEFAULT);
|
|
for (byte i = 0; i < CHANNELS; i++) {
|
|
power[i] = 0;
|
|
lastPower[i] = 0;
|
|
triggered = false;
|
|
}
|
|
maxIndex = -1;
|
|
maxPower = 0;
|
|
}
|
|
|
|
void loop() {
|
|
if (maxIndex != -1 && lastPower[maxIndex] < RESET_THRES) {
|
|
triggered = false;
|
|
digitalWrite(outPins[maxIndex], LOW);
|
|
maxIndex = -1;
|
|
maxPower = 0;
|
|
}
|
|
|
|
for (byte i = 0; i < CHANNELS; i++) {
|
|
inputWindow[i].put(analogRead(inPins[i]));
|
|
power[i] = sensitivities[i] *
|
|
(power[i] - inputWindow[i].get(1) + inputWindow[i].get());
|
|
|
|
if (lastPower[i] > maxPower && power[i] < lastPower[i]) {
|
|
maxPower = lastPower[i];
|
|
maxIndex = i;
|
|
}
|
|
lastPower[i] = power[i];
|
|
#if DEBUG
|
|
Serial.print(power[i]);
|
|
Serial.print(" ");
|
|
#endif
|
|
}
|
|
|
|
if (!triggered && maxPower >= HIT_THRES) {
|
|
triggered = true;
|
|
digitalWrite(outPins[maxIndex], HIGH);
|
|
#if !DEBUG
|
|
Keyboard.print(outKeys[maxIndex]);
|
|
#endif
|
|
}
|
|
#if DEBUG
|
|
Serial.print("\n");
|
|
#endif
|
|
}
|