1
0
mirror of https://github.com/whowechina/aic_pico.git synced 2024-11-24 14:00:09 +01:00

LED too bright solution.

This commit is contained in:
whowechina 2023-11-12 19:03:33 +08:00
parent 15930853c0
commit dac7d88d4c

View File

@ -79,7 +79,7 @@ I'll let these images do the talk.
#### Notes
* The firmware supports up to 16 LEDs on the WS2812B LED strip. I personally used 3 as shown in main title image. But you can experiment with different LED numbers, as long as they fit within the housing.
* LED might be excessively bright even at low settings, consider covering it with some filter tape.
* The mode switch on PN532 must be in "I2C" mode, picture below shows the correct settings.
<img src="doc/pn532_i2c.jpg" width="40%">