mirror of
https://github.com/whowechina/aic_pico.git
synced 2024-12-11 20:25:57 +01:00
86 lines
2.4 KiB
Plaintext
86 lines
2.4 KiB
Plaintext
;
|
|
; Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
|
|
;
|
|
; SPDX-License-Identifier: BSD-3-Clause
|
|
;
|
|
|
|
.program ws2812
|
|
.side_set 1
|
|
|
|
.define public T1 2
|
|
.define public T2 5
|
|
.define public T3 3
|
|
|
|
.lang_opt python sideset_init = pico.PIO.OUT_HIGH
|
|
.lang_opt python out_init = pico.PIO.OUT_HIGH
|
|
.lang_opt python out_shiftdir = 1
|
|
|
|
.wrap_target
|
|
bitloop:
|
|
out x, 1 side 0 [T3 - 1] ; Side-set still takes place when instruction stalls
|
|
jmp !x do_zero side 1 [T1 - 1] ; Branch on the bit we shifted out. Positive pulse
|
|
do_one:
|
|
jmp bitloop side 1 [T2 - 1] ; Continue driving high, for a long pulse
|
|
do_zero:
|
|
nop side 0 [T2 - 1] ; Or drive low, for a short pulse
|
|
.wrap
|
|
|
|
% c-sdk {
|
|
#include "hardware/clocks.h"
|
|
|
|
static inline void ws2812_program_init(PIO pio, uint sm, uint offset, uint pin, float freq, bool rgbw) {
|
|
|
|
pio_gpio_init(pio, pin);
|
|
pio_sm_set_consecutive_pindirs(pio, sm, pin, 1, true);
|
|
|
|
pio_sm_config c = ws2812_program_get_default_config(offset);
|
|
sm_config_set_sideset_pins(&c, pin);
|
|
sm_config_set_out_shift(&c, false, true, rgbw ? 32 : 24);
|
|
sm_config_set_fifo_join(&c, PIO_FIFO_JOIN_TX);
|
|
|
|
int cycles_per_bit = ws2812_T1 + ws2812_T2 + ws2812_T3;
|
|
float div = clock_get_hz(clk_sys) / (freq * cycles_per_bit);
|
|
sm_config_set_clkdiv(&c, div);
|
|
|
|
pio_sm_init(pio, sm, offset, &c);
|
|
pio_sm_set_enabled(pio, sm, true);
|
|
}
|
|
%}
|
|
|
|
.program ws2812_parallel
|
|
|
|
.define public T1 2
|
|
.define public T2 5
|
|
.define public T3 3
|
|
|
|
.wrap_target
|
|
out x, 32
|
|
mov pins, !null [T1-1]
|
|
mov pins, x [T2-1]
|
|
mov pins, null [T3-2]
|
|
.wrap
|
|
|
|
% c-sdk {
|
|
#include "hardware/clocks.h"
|
|
|
|
static inline void ws2812_parallel_program_init(PIO pio, uint sm, uint offset, uint pin_base, uint pin_count, float freq) {
|
|
for(uint i=pin_base; i<pin_base+pin_count; i++) {
|
|
pio_gpio_init(pio, i);
|
|
}
|
|
pio_sm_set_consecutive_pindirs(pio, sm, pin_base, pin_count, true);
|
|
|
|
pio_sm_config c = ws2812_parallel_program_get_default_config(offset);
|
|
sm_config_set_out_shift(&c, true, true, 32);
|
|
sm_config_set_out_pins(&c, pin_base, pin_count);
|
|
sm_config_set_set_pins(&c, pin_base, pin_count);
|
|
sm_config_set_fifo_join(&c, PIO_FIFO_JOIN_TX);
|
|
|
|
int cycles_per_bit = ws2812_parallel_T1 + ws2812_parallel_T2 + ws2812_parallel_T3;
|
|
float div = clock_get_hz(clk_sys) / (freq * cycles_per_bit);
|
|
sm_config_set_clkdiv(&c, div);
|
|
|
|
pio_sm_init(pio, sm, offset, &c);
|
|
pio_sm_set_enabled(pio, sm, true);
|
|
}
|
|
%}
|