AIC Pico - Amusement IC Card Reader, AIME & Cardio Emulator

Features:

• It's small, smallest as far as I know.
• Easy to make.
• Sega AIME I/O and Spicetools CardIO emulation.
• Command line of rich features.
• Supported card:
  • Felica (Amusement IC)
  • ISO/IEC 14443 Type A (BanaPassport, Mifare, Amiibo, some IC tags, some ID tags, etc.)
  • To be updated.
• Emulates virtual AIC from any Mifare cards.
• Variants
  • AIC Pico
  • AIC Key PN532 (see notes 1 below)
  • AIC Key PN5180 (see notes 1 below)
  • AIC Pico Lib (see notes 2 below)
• All source files open.

Notes:

1. Be patient, I'm working on them. And there's chance I will fail.
2. So one can integrate "AIC Pico" into a Raspberry Pi Pico based controller. Will be ready when I finish AIC Key.
   

Thanks to many respectful guys/companies who made their tools or materials free or open source (KiCad, OnShape, InkScape, Fritzing, Raspberry things), ChatGPT and GitHub Copilot helped a lot as well.

And thanks to community developers that inspired me and helped me: CrazyRedMachine (https://github.com/CrazyRedMachine) for the Spicetools Card IO part, Sucareto's AIME Reader (https://github.com/Sucareto/Arduino-Aime-Reader) for the AIME protocol part.

Notes

Check out my other cool projects, they're all great, I promise. https://github.com/whowechina/

This project:

• Heavily depends on 3D printing, a Bambu AMS system helps a lot.
• Requires skills to solder tiny components and wires.

Disclaimer

I made this project in my personal time with no financial benefit or sponsorship. I will continue to improve the project. I have done my best to ensure that everything is accurate and functional, there's always a chance that mistakes may occur. I cannot be held responsible for any loss of your time or money that may result from using this open source project. Thank you for your understanding.

About the License

It's CC-NC. So DIY for yourself and for your friend, don't make money from it.

HOW TO BUILD

Seriously, this is the easiest one among all my Pico series projects.

Components

• 1x Rasberry Pi Pico or Pico W (clones work too).
  https://www.raspberrypi.com/products/raspberry-pi-pico
• 1x PN532 Module (the Red Square board version, cheap clones work too).
  https://www.elechouse.com/product/pn532-nfc-rfid-module-v4/
• Some thin wires.
• Thin WS2812B LED strip.
• 4x M2*8mm screws.

3D Prints

• aic_pico_bottom.stl
  The bottom part.

For the top part, choose one that fits your need.

• aic_pico_top.stl
  Regular top part.
• aic_pico_top_ams.3mf
  Regular top part, for multi-color printing.
• aic_pico_top_tall.stl
  Taller top part, so a thicker LED strip can fit.
• aic_pico_top_tall_ams.3mf
  Taller top part, for multi-color printing.

Assembly

I'll let these images do the talk.

Notes

• The firmware supports up to 16 LEDs on the WS2812B LED strip. I personally used 3 as shown in main title image. But you can experiment with different LED numbers, as long as they fit within the housing.

• The mode switch on PN532 must be in "I2C" mode, picture below shows the correct settings.
  

Firmware

• UF2 file is in Production\Firmware folder.
• For the new build, hold the BOOTSEL button while connect the USB to a PC, there will be a disk named "RPI-RP2" showed up. Drag the UF2 firmware binary file into it. That's it.
• It has a command line to do configuration. You can use this Web Serial Terminal to connect to the main USB serial port of the board. (Note: "?" is for help)
  https://googlechromelabs.github.io/serial-terminal/
• You can use "update" command in command line to update the firmware in the future, so you don't need to open the housing.
• Spicetools cardio (Card I/O) HID is supported;
• SEGA AIME protocol is supported on a second serial port.
• Some command line commands:
  • "level [0..255]" to adjust the brightness.
  • "nfc" manually to detect cards.
  • "update" reboot into firmware update mode.
• Given my limited hobby time, the firmware may not be fully tested. Please report any anomalies.

CAD Source File

I'll post when I finish all variants.