Cons-n-Stuff/chu_pico
1
0
Fork 0
mirror of https://github.com/whowechina/chu_pico.git synced 2024-11-11 22:47:09 +01:00
Code Releases Activity

Update README on ToF and MPR121

Browse Source
This commit is contained in:
whowechina 2023-10-15 16:16:19 +08:00
parent 454d7a0b99
commit d5cbff6d10
4 changed files with 8 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
README.md
View File

@ -53,8 +53,10 @@ It's CC-NC. So DIY for yourself and for your friend, don't make money from it.
https://www.lcsc.com/product-detail/Light-Emitting-Diodes-LED_Worldsemi-WS2812B-4020_C965557.html
* TCA9548APWR (TSSOP-24) I2C multiplexer.
https://www.lcsc.com/product-detail/Signal-Switches-Encoders-Decoders-Multiplexers_Texas-Instruments-TCA9548APWR_C130026.html
* 3x MPR121 modules, there're many types in the market, choose ones like this, and remember to **cut (unshort) the ADDR pin** which is short by default.
* 3x MPR121 modules, there're many types in the market, choose ones like this.
https://www.sparkfun.com/products/retired/9695
Before solder MP121 module to the main PCB board, remember to **cut (unshort) the ADDR pin** which is short by default.
<img src="doc/mpr121_cut.png" width="40%">
There's not enough space for the whole height of MPR121 module plus the lead pads. So you need to solder the module like the picture shows below.
First apply some insulation tape.
<img src="doc/mpr121_solder1.jpg" width="60%">
@ -62,9 +64,12 @@ It's CC-NC. So DIY for yourself and for your friend, don't make money from it.
<img src="doc/mpr121_solder2.jpg" width="60%">
You can use the pins comes with the module, but you need to cut away the plastic pads.
<img src="doc/mpr121_solder3.jpg" width="60%">
* 5x Sharp GP2Y0E03 ToF sensors, buy ones that equipped with cables.
* 5x Sharp GP2Y0E03 or ST VL53L0X ToF sensor modules, you need cables as well.
https://www.lcsc.com/product-detail/Angle-Linear-Position-Sensors_Sharp-Microelectronics-GP2Y0E03_C920270.html
<img src="doc/gp2y0e03_solder.jpg" width="90%">
<img src="doc/gp2y0e03_solder.jpg" width="60%">
<img src="doc/vl53l0x.jpg" width="60%">
You can use both of them in a same PCB, the firmware will identify each of them automatically.
<img src="doc/tof_mix.jpg" width="80%">
* 2x 0603 5.1kohm resistors (R1, R2) for USB.
* 1x SN74LV1T34DBVR (SOT-23-5) level shifter (U8), if you can't find one, use a 0603 10ohm resistor (R3) as an alternative.
https://www.lcsc.com/product-detail/Buffer-Driver-Transceiver_Texas-Instruments-SN74LV1T34DBVR_C100024.html

BIN
doc/mpr121_cut.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 276 KiB

BIN
doc/tof_mix.jpg Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 328 KiB

BIN
doc/vl53l0x.jpg Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 635 KiB