1
0
mirror of https://github.com/whowechina/chu_pico.git synced 2024-11-24 11:00:10 +01:00
Pico controller for Chunithm-type rhythm game
Go to file
2023-09-28 22:39:21 +08:00
doc More commands 2023-09-27 22:38:26 +08:00
firmware Enable HID joy if redboard feature received 2023-09-28 22:39:21 +08:00
PCB/main Some cleanups 2023-09-23 00:34:45 +08:00
Production Enable HID joy if redboard feature received 2023-09-28 22:39:21 +08:00
.gitignore Some cleanups 2023-09-23 00:34:45 +08:00
LICENSE.txt Ready to publish 2023-09-10 14:23:31 +08:00
README.md Update README on MPR121 soldering 2023-09-24 10:48:39 +08:00

Chu Pico - Chunithm Style Mini Controller

Features:

  • It's small, made for 15-17 inch screen.
  • Air towers are replaced with built-in ToF sensors.
  • HID lights, of course!
  • 32 keys (upper and lower rows).
  • Follows CrazyRedMachine's RedBoard I/O protocol.
  • All source files open.

Thanks to many respectful guys/companies who made their tools or materials free or open source (KiCad, OnShape, InkScape, Raspberry things).

And thanks to community developers that inspired me and helped me: CrazyRedMachine (https://github.com/CrazyRedMachine), SpeedyPotato (https://github.com/speedypotato).

Notes

This one is relatively easy to build compared with my other projects like IIDX Pico or Teeny. You can check out my other cool projects.

This Chu Pico project:

  • Heavily depends on 3D printing, you need a Bambu 3D printer.
  • Requires skills to solder tiny components.

Disclaimer

I made this project in my personal time with no financial benefit or sponsorship. I will continue to improve the project. I have done my best to ensure that everything is accurate and functional, there's always a chance that mistakes may occur. I cannot be held responsible for any loss of your time or money that may result from using this open source project. Thank you for your understanding.

About the License

It's CC-NC. So DIY for yourself and for your friend, don't make money from it.

HOW TO BUILD

PCB

Light Guide Panel

  • Find a service to cut a light guide panel using DXF or DWG file Production\CAD\chu_pico_lgp.*, the size is 256mm*60mm, 1.8mm to 2.0mm thickness, thinner is better for sensitivity. 2.0mm is easy to find, 1.8mm is rare. I used 1.8mm for my build.
  • LGP material choices:
    • Real LGP (Light Guide Panel) material, it's the best choice.
    • Clear Acrylic with Light Guide Film, it's a good choice.
    • Clear Acrylic with single-side-frosted, it's a good choice.
    • Clear Acrylic with manual single-side-sanding, it can work too.

Panel Film

  • A self-adhesive textured/frosted film sheet, it is applied on top surface of the light guide panel. It improves touch feel. You can use buy window sticker film. You MUST use self-adhesive ones, NOT static cling ones. They're usually very cheap.
  • Cut the film to roughly match the shape of the light guide panel, and stick to the panel.
  • Gentlely rub the film to remove any air bubbles and make it stick tightly.

IR Cover

  • It's for good looking, as it hides 5 ToF sensors.
  • IR lights can go through.
  • Find a service to cut an IR cover using the DXF or DWG file Production\CAD\chu_pico_ir_cover.*, the size is 293.2mm*63.5mm, 1mm thickness. The material must be "Infrared Transmitting Acrylic Sheet" which can block visible lights (so it looks black) while letting IR lights go through.
  • If you can't find one, cut a regular smooth surface acrylic, but it can't hide the ToF sensors which are not good looking.

3D Printing

  • You need a Bambu 3D printer for 2 reasons:

    • Parts are designed to perfectly fit in its 256mm*256mm print bed.
    • Its AMS system works great for easy-to-remove support material.
  • For all the following prints:

    • To fit object in the bed, Z rotate: 315 degree, X, Y move to: 134mm

    • PLA, PETG, ABS are all OK.

    • Layer height: 0.2mm

    • 4-6 walls, 50+% infill

    • Support: Yes. If you have Bambu AMS system, use their special support material at interface layers.

  • Base: Production\3D\chu_pico_base.stl, dark gray filament.

  • Top Cover: Production\3D\chu_pico_top_cover.stl, dark gray filament.

  • Cover Base: Production\3D\chu_pico_cover_base.stl, clear transparent (IMPORTANT) filament.

  • Light Guide Panel Fixer: Production\3D\chu_pico_lgp_fixer.stl, color doesn't matter.

Exploded View for Assembly

From top to bottom:

  • IR Cover
  • Top Cover
  • Cover Base
  • Panel Film
  • Light Guide Panel
  • PCB
  • Light Guide Panel Fixer
  • Base

You need 4x M3*12mm screws and 4x M3 hex nuts to fix all things.

7x silicone anti-slip pads can be applied to the bottom side of the base to provide stability when playing.

Firmware

  • UF2 file is in Production\Firmware folder.
  • For the new build, hold the BOOTSEL button while connect the USB to a PC, there will be a disk named "RPI-RP2" showed up. Drag the UF2 firmware binary file into it. That's it. There's a small hole at the bottom side of the Chu Pico, it is facing right to the BOOTSEL button.
  • It works on CrazyRedMachine's RedBoard protocol. For more information, please check out CrazyRedMachine's project (Don't forget to give him a star and drop by his GitHub for other cool projects):
    https://github.com/CrazyRedMachine/RedBoard
  • It has a command line to do configuration. You can use this Web Serial Terminal to connect to the USB serial port of the Chu Pico. (Note: "?" is for help)
    https://googlechromelabs.github.io/serial-terminal/

CAD Source File

I'm using OnShape free subscription. It's powerful but it can't archive original designs to local, so I can only share the link here. STL/DXF/DWG files are exported from this online document.
https://cad.onshape.com/documents/8b9d0fe6ff1bfa4da17d33ee/w/5c7c980a282a19e7ba1db795/e/56ee65492584a3f709c23c49?renderMode=1&uiState=64fd606f17393c0e6f9b19a4