mirror of
https://github.com/whowechina/mai_pico.git
synced 2024-11-11 23:27:10 +01:00
IO4 output implemented and coin button working
This commit is contained in:
whowechina
parent
8ee584af17
commit
c4f3a535e3
Binary file not shown.
@ -116,7 +116,7 @@ It's CC-NC. So DIY for yourself and for your friend, don't make money from it.
|
||||
* It has a command line to do configuration. You can use this Web Serial Terminal to connect to the USB serial port of the Mai Pico. (Note: "?" is for help)
|
||||
https://googlechromelabs.github.io/serial-terminal/
|
||||
<img src="doc/cmd.png" width="80%">
|
||||
* Button GPIOs can be remapped using `gpio` command.
|
||||
* Button GPIOs can be remapped using `gpio` command. Firmware supports 8 main buttons on the ring and 4 auxiliary buttons (Test, Service, Navigate and Coin).
|
||||
* Daisy chained RGB LED numbers for each button can be assigned using `rgb` command.
|
||||
* LED brightness can be adjusted by `level` command.
|
||||
* There are MPR121 parameter tuning and sensitive settings, explore them yourself.
|
||||
|
||||
@ -124,7 +124,7 @@ https://github.com/whowechina/
|
||||
* 它有一个命令行进行配置。你可以使用这个 Web Serial Terminal 连接到 Mai Pico 的 USB 串口。（注意："?" 是帮助）
|
||||
https://googlechromelabs.github.io/serial-terminal/
|
||||
<img src="doc/cmd.png" width="80%">
|
||||
* 可以使用 `gpio` 命令重新映射按钮 GPIOs。
|
||||
* 可以使用 `gpio` 命令重新映射按钮 GPIOs，固件支持 8 个主按钮和 4 个辅助按钮（分别是：Test, Service, Navigate, Coin）。
|
||||
* 可以使用 `rgb` 命令为每个按钮分配串联的 RGB LED 数量。
|
||||
* 可以通过 `level` 命令调整 LED 的亮度。
|
||||
* 有 MPR121 参数调整和灵敏度设置，自己探索。
|
||||
|
||||
@ -14,6 +14,7 @@
|
||||
#define RGB_ORDER GRB // or RGB
|
||||
#define RGB_BUTTON_MAP { 5, 4, 3, 2, 1, 0, 7, 6, 8, 9, 10, 11 }
|
||||
|
||||
/* 8 main buttons, Test, Service, Navigate, Coin */
|
||||
#define BUTTON_DEF { 1, 0, 4, 5, 8, 9, 3, 2, 12, 11, 10, 14 }
|
||||
|
||||
/* HID Keycode: https://github.com/hathach/tinyusb/blob/master/src/class/hid/hid.h */
|
||||
|
||||
@ -43,10 +43,18 @@ static void report_usb_hid()
|
||||
{
|
||||
if (tud_hid_ready()) {
|
||||
if (mai_cfg->hid.joy) {
|
||||
static uint16_t last_buttons = 0;
|
||||
uint16_t buttons = button_read();
|
||||
hid_joy.buttons[0] = native_to_io4(buttons);
|
||||
hid_joy.buttons[1] = native_to_io4(0);
|
||||
if (last_buttons ^ buttons & (1 << 11)) {
|
||||
if ((buttons & (1 << 11)) && (hid_joy.chutes[0] < 0xff00)) {
|
||||
// just pressed coin button
|
||||
hid_joy.chutes[0] += 0x100;
|
||||
}
|
||||
}
|
||||
tud_hid_n_report(0, REPORT_ID_JOYSTICK, &hid_joy, sizeof(hid_joy));
|
||||
last_buttons = buttons;
|
||||
}
|
||||
if (mai_cfg->hid.nkro) {
|
||||
tud_hid_n_report(1, 0, &hid_nkro, sizeof(hid_nkro));
|
||||
@ -82,3 +90,33 @@ void hid_update()
|
||||
gen_nkro_report();
|
||||
report_usb_hid();
|
||||
}
|
||||
|
||||
typedef struct __attribute__((packed)) {
|
||||
uint8_t report_id;
|
||||
uint8_t cmd;
|
||||
uint8_t payload[62];
|
||||
} hid_output_t;
|
||||
|
||||
void hid_proc(const uint8_t *data, uint8_t len)
|
||||
{
|
||||
hid_output_t *output = (hid_output_t *)data;
|
||||
if (output->report_id == REPORT_ID_OUTPUT) {
|
||||
switch (output->cmd) {
|
||||
case 0x01: // Set Timeout
|
||||
case 0x02: // Set Sampling Count
|
||||
hid_joy.system_status = 0x30;
|
||||
break;
|
||||
case 0x03: // Clear Board Status
|
||||
hid_joy.chutes[0] = 0;
|
||||
hid_joy.chutes[1] = 0;
|
||||
hid_joy.system_status = 0x00;
|
||||
break;
|
||||
case 0x04: // Set General Output
|
||||
case 0x41: // I don't know what this is
|
||||
break;
|
||||
default:
|
||||
printf("USB unknown cmd: %d\n", output->cmd);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@ -7,5 +7,6 @@
|
||||
#define HID_H_
|
||||
|
||||
void hid_update();
|
||||
void hid_proc(const uint8_t *data, uint8_t len);
|
||||
|
||||
#endif
|
||||
|
||||
@ -135,4 +135,5 @@ void tud_hid_set_report_cb(uint8_t itf, uint8_t report_id,
|
||||
hid_report_type_t report_type, uint8_t const *buffer,
|
||||
uint16_t bufsize)
|
||||
{
|
||||
hid_proc(buffer, bufsize);
|
||||
}
|
||||
|
||||
@ -89,9 +89,13 @@ enum { ITF_NUM_JOY, ITF_NUM_NKRO,
|
||||
ITF_NUM_CDC_LED, ITF_NUM_CDC_LED_DATA,
|
||||
ITF_NUM_TOTAL };
|
||||
|
||||
#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_HID_DESC_LEN * 2 + TUD_CDC_DESC_LEN * 3)
|
||||
#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + \
|
||||
TUD_HID_INOUT_DESC_LEN * 1 + \
|
||||
TUD_HID_DESC_LEN * 1 + \
|
||||
TUD_CDC_DESC_LEN * 3)
|
||||
|
||||
#define EPNUM_JOY 0x81
|
||||
#define EPNUM_OUTPUT 0x01
|
||||
#define EPNUM_KEY 0x82
|
||||
|
||||
#define EPNUM_CDC_CLI_NOTIF 0x83
|
||||
@ -114,8 +118,8 @@ uint8_t const desc_configuration_joy[] = {
|
||||
|
||||
// Interface number, string index, protocol, report descriptor len, EP In
|
||||
// address, size & polling interval
|
||||
TUD_HID_DESCRIPTOR(ITF_NUM_JOY, 4, HID_ITF_PROTOCOL_NONE,
|
||||
sizeof(desc_hid_report_joy), EPNUM_JOY,
|
||||
TUD_HID_INOUT_DESCRIPTOR(ITF_NUM_JOY, 4, HID_ITF_PROTOCOL_NONE,
|
||||
sizeof(desc_hid_report_joy), EPNUM_OUTPUT, EPNUM_JOY,
|
||||
CFG_TUD_HID_EP_BUFSIZE, 1),
|
||||
|
||||
TUD_HID_DESCRIPTOR(ITF_NUM_NKRO, 5, HID_ITF_PROTOCOL_NONE,
|
||||
|
||||
@ -6,6 +6,7 @@
|
||||
|
||||
enum {
|
||||
REPORT_ID_JOYSTICK = 1,
|
||||
REPORT_ID_OUTPUT = 16,
|
||||
};
|
||||
|
||||
// because they are missing from tusb_hid.h
|
||||
@ -99,6 +100,16 @@ enum {
|
||||
\
|
||||
HID_REPORT_COUNT(1), HID_REPORT_SIZE(232), \
|
||||
HID_INPUT(HID_CONSTANT | HID_ABSOLUTE), \
|
||||
\
|
||||
HID_USAGE_PAGE_N(0xffa0, 2), \
|
||||
HID_USAGE(0x00), \
|
||||
HID_REPORT_ID(REPORT_ID_OUTPUT) \
|
||||
HID_COLLECTION(HID_COLLECTION_APPLICATION), \
|
||||
HID_USAGE(0x00), \
|
||||
HID_LOGICAL_MIN(0), HID_LOGICAL_MAX(255), \
|
||||
HID_REPORT_COUNT(63), HID_REPORT_SIZE(8), \
|
||||
HID_OUTPUT(HID_DATA | HID_VARIABLE | HID_ABSOLUTE), \
|
||||
HID_COLLECTION_END, \
|
||||
HID_COLLECTION_END
|
||||
|
||||
#define MAIPICO_REPORT_DESC_NKRO \
|
||||
|
||||
Loading…
Reference in New Issue
Block a user