Case done (and added the missing USB-C slot)

CASE/pico_popn_case.scad

@@ -1,40 +1,30 @@
 wall=2;
-clearance=0.25; // clearance
+clearance=0.25;
 thickness=9;
 bottom=2.4;
 
-difference() {
-    body();
-    body_cut();
-    screws();
+the_case();
 
-    gateron([-54,33,0]);
-    gateron([-18,33,0]);
-    gateron([18,33,0]);
-    gateron([54,33,0]);
-    
-    gateron([-72,0,0]);
-    gateron([-36,0,0]);
-    gateron([-0,0,0]);
-    gateron([36,0,0]);
-    gateron([72,0,0]);
-    
-    pico([-24.5,43.5,0]);
-}
+module the_case() {
+    difference() {
+        body();
+        body_cut();
+        screws();
 
-//test_marks();
-//test_board();
-
-module test_marks() {
-    color("red") translate([-8.5,-40,0]) cube([17,10,3]);
-    color("blue") translate([10,-40,0]) cube([3,3,2.4]);
-    
-    translate([-145.5,20,2.4]) import("pico_voltex.3mf", convexity=3);
-}
-
-module test_board() {
-    color("green", 0.5) translate([0,0,3]) main_shape(0, 1.6);
-    translate([2,55,1.8]) color("green") rotate([90,180,90]) import("pico.stl", convexity=3);
+        gateron([-54,33,0]);
+        gateron([-18,33,0]);
+        gateron([18,33,0]);
+        gateron([54,33,0]);
+        
+        gateron([-72,0,0]);
+        gateron([-36,0,0]);
+        gateron([-0,0,0]);
+        gateron([36,0,0]);
+        gateron([72,0,0]);
+        
+        pico([-24.5,43.5,0]);
+        usbc();
+    }
 }
 
 module body() {
@@ -69,8 +59,8 @@ module gateron(pos) {
 
 module pico(pos) {
     translate([0,0,0.6]) translate(pos) color("gold") cube([53,23,5]);
-    translate([-0.75,7.25,-1]) translate(pos) color("gold") cube([6.25,8.5,6]);
-    translate([10,12.5,-1]) translate(pos) color("gold") cube([6,5,6]);
+    translate([-0.9,7.25,-1]) translate(pos) color("red") cube([6.75,8.5,6]);
+    translate([10,12.5,-1]) translate(pos) color("blue") cube([6,5,6]);
 }
 
 module screws() {
@@ -80,4 +70,10 @@ module screws() {
     translate([-85,-10,-1]) color("gray") cylinder(d=3.5, h=10);
     translate([85,-10,-1]) color("gray") cylinder(d=3.5, h=10);
 }
-    
+
+module usbc() {
+    hull() {
+        translate([-37.5, 80, 5.6]) rotate([90,0,0]) cylinder(d=3.4,h=20,$fn=32);
+        translate([-30.75, 80, 5.6]) rotate([90,0,0]) cylinder(d=3.4,h=20,$fn=32);
+    }
+}