yubideck v3 firmware support

README.md

@@ -12,6 +12,8 @@ Software adapter for various Chunithm slider controllers with a built-in Brokeni
 
 ## Changelog
 
+- v0.5.0
+  - Support for Yubideck 3.0 firmware
 - v0.4.3
   - Make Yubideck USB reports more flexible when reading data
 - v0.4.2

src-slider_io/src/device/config.rs

@@ -6,6 +6,7 @@ pub enum HardwareSpec {
   TasollerTwo,
   Yuancon,
   Yubideck,
+  YubideckThree,
 }
 
 #[derive(Debug, Clone)]
@@ -53,6 +54,10 @@ impl DeviceMode {
         spec: HardwareSpec::Yubideck,
         disable_air: v["disableAirStrings"].as_bool()?,
       },
+      "yubideck-three" => DeviceMode::Hardware {
+        spec: HardwareSpec::YubideckThree,
+        disable_air: v["disableAirStrings"].as_bool()?,
+      },
       "diva" => DeviceMode::DivaSlider {
         port: v["divaSerialPort"].as_str()?.to_string(),
         brightness: u8::try_from(v["divaBrightness"].as_i64()?).ok()?,

src-slider_io/src/device/hid.rs

@@ -18,7 +18,7 @@ use crate::{
 use super::config::HardwareSpec;
 
 type HidReadCallback = fn(&Buffer, &mut SliderInput) -> ();
-type HidLedCallback = fn(&mut Buffer, &SliderLights) -> ();
+type HidLedCallback = fn(&mut Buffer, &mut Buffer, &SliderLights) -> ();
 
 enum WriteType {
   Bulk,
@@ -41,6 +41,7 @@ pub struct HidJob {
   led_write_type: WriteType,
   led_callback: HidLedCallback,
   led_buf: Buffer,
+  led_buf_two: Buffer,
 
   handle: Option<DeviceHandle<GlobalContext>>,
 }
@@ -70,6 +71,7 @@ impl HidJob {
       led_write_type: led_type,
       led_callback,
       led_buf: Buffer::new(),
+      led_buf_two: Buffer::new(),
       handle: None,
     }
   }
@@ -102,7 +104,7 @@ impl HidJob {
           input.extra[0..2].copy_from_slice(&bits[26..28]);
         },
         WriteType::Bulk,
-        |buf, lights| {
+        |buf, _, lights| {
           buf.len = 240;
           buf.data[0] = 'B' as u8;
           buf.data[1] = 'L' as u8;
@@ -139,7 +141,7 @@ impl HidJob {
           input.extra[0..2].copy_from_slice(&bits[6..8]);
         },
         WriteType::Bulk,
-        |buf, lights| {
+        |buf, _, lights| {
           buf.len = 240;
           buf.data[0] = 'B' as u8;
           buf.data[1] = 'L' as u8;
@@ -190,7 +192,7 @@ impl HidJob {
           }
         },
         WriteType::Interrupt,
-        |buf, lights| {
+        |buf, _, lights| {
           buf.len = 31 * 2;
           for (buf_chunk, state_chunk) in buf
             .data
@@ -225,7 +227,7 @@ impl HidJob {
           }
         },
         WriteType::Interrupt,
-        |buf, lights| {
+        |buf, _, lights| {
           buf.len = 62;
 
           let lights_nibbles: Vec<u8> = lights
@@ -252,6 +254,56 @@ impl HidJob {
           }
         },
       ),
+      HardwareSpec::YubideckThree => Self::new(
+        state.clone(),
+        0x1973,
+        0x2001,
+        0x81, // Need to confirm
+        0x02, // Need to confirm
+        *disable_air,
+        |buf, input| {
+          if buf.len != 45 && buf.len != 46 {
+            return;
+          }
+
+          input.ground.copy_from_slice(&buf.data[2..34]);
+          input.flip_vert();
+          for i in 0..6 {
+            input.air[i ^ 1] = (buf.data[0] >> i) & 1;
+          }
+          for i in 0..3 {
+            input.extra[2 - i] = (buf.data[1] >> i) & 1;
+          }
+        },
+        WriteType::Interrupt,
+        |buf, buf_two, lights| {
+          buf.len = 61;
+          buf.data[0] = 0;
+          buf_two.len = 61;
+          buf_two.data[0] = 1;
+
+          for (buf_chunk, state_chunk) in buf.data[1..61]
+            .chunks_mut(3)
+            .zip(lights.ground.chunks(3).skip(11).take(20).rev())
+          {
+            buf_chunk[0] = state_chunk[0];
+            buf_chunk[1] = state_chunk[1];
+            buf_chunk[2] = state_chunk[2];
+          }
+
+          for (buf_chunk, state_chunk) in buf_two.data[1..34]
+            .chunks_mut(3)
+            .zip(lights.ground.chunks(3).take(11).rev())
+          {
+            buf_chunk[0] = state_chunk[0];
+            buf_chunk[1] = state_chunk[1];
+            buf_chunk[2] = state_chunk[2];
+          }
+
+          buf_two.data[34..37].copy_from_slice(&lights.air_left[3..6]);
+          buf_two.data[37..40].copy_from_slice(&lights.air_right[3..6]);
+        },
+      ),
     }
   }
 
@@ -327,7 +379,11 @@ impl ThreadJob for HidJob {
       {
         let mut lights_handle = self.state.lights.lock();
         if lights_handle.dirty {
-          (self.led_callback)(&mut self.led_buf, lights_handle.deref());
+          (self.led_callback)(
+            &mut self.led_buf,
+            &mut self.led_buf_two,
+            lights_handle.deref(),
+          );
           lights_handle.dirty = false;
         }
       }
@@ -349,6 +405,26 @@ impl ThreadJob for HidJob {
           self.led_buf.len = 0;
         }
       }
+
+      if self.led_buf_two.len != 0 {
+        let res = (match self.led_write_type {
+          WriteType::Bulk => {
+            handle.write_bulk(self.led_endpoint, self.led_buf_two.slice(), TIMEOUT)
+          }
+          WriteType::Interrupt => {
+            handle.write_interrupt(self.led_endpoint, &self.led_buf_two.slice(), TIMEOUT)
+          }
+        })
+        .map_err(|e| {
+          // debug!("Device write error {}", e);
+          e
+        })
+        .unwrap_or(0);
+        if res == self.led_buf_two.len + 1 {
+          // work = true;
+          self.led_buf_two.len = 0;
+        }
+      }
     }
 
     work

src-tauri/Cargo.lock

@@ -2996,7 +2996,7 @@ dependencies = [
 
 [[package]]
 name = "slidershim"
-version = "0.4.3"
+version = "0.5.0"
 dependencies = [
  "env_logger",
  "log",

src-tauri/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "slidershim"
-version = "0.4.3"
+version = "0.5.0"
 description = "slidershim"
 authors = ["4yn"]
 license = ""

src-tauri/README.txt

@@ -2,13 +2,15 @@
  ___| (_) __| | ___ _ __ ___| |__ (_)_ __ ___  
 / __| | |/ _` |/ _ \ '__/ __| '_ \| | '_ ` _ \ 
 \__ \ | | (_| |  __/ |  \__ \ | | | | | | | | |
-|___/_|_|\__,_|\___|_|  |___/_| |_|_|_| |_| |_| v0.4.3
+|___/_|_|\__,_|\___|_|  |___/_| |_|_|_| |_| |_| v0.5.0
 =============================================== 
 
 https://github.com/4yn/slidershim
 
 # Changelog
 
+- v0.5.0
+  - Support for Yubideck 3.0 firmware
 - v0.4.3
   - Make Yubideck USB reports more flexible when reading data
 - v0.4.2

src-tauri/tauri.conf.json

@@ -1,7 +1,7 @@
 {
   "package": {
     "productName": "slidershim",
-    "version": "0.4.3"
+    "version": "0.5.0"
   },
   "build": {
     "distDir": "../public",
@@ -21,7 +21,9 @@
         "icons/icon.icns",
         "icons/icon.ico"
       ],
-      "resources": ["./README.txt"],
+      "resources": [
+        "./README.txt"
+      ],
       "externalBin": [],
       "copyright": "© 4yn 2022",
       "category": "DeveloperTool",
@@ -74,4 +76,4 @@
       "iconAsTemplate": true
     }
   }
-}
+}

src/App.svelte

@@ -196,7 +196,8 @@
           <option value="tasoller-one">GAMO2 Tasoller, 1.0 HID Firmware</option>
           <option value="tasoller-two">GAMO2 Tasoller, 2.0 HID Firmware</option>
           <option value="yuancon">Yuancon Laverita, HID Firmware</option>
-          <option value="yubideck">大四 / Yubideck, HID Firmware</option>
+          <option value="yubideck">大四 / Yubideck, HID Firmware 1.0</option>
+          <option value="yubideck-three">大四 / Yubideck, HID Firmware 3.0</option>
           <option value="diva">Slider over Serial</option>
           <option value="brokenithm">Brokenithm</option>
           <option value="brokenithm-led">Brokenithm + Led</option>