mirror of
https://github.com/Atmosphere-NX/Atmosphere.git
synced 2024-11-23 23:31:11 +01:00
Updates to Cheats documentation (#1568)
* docs: update cheats doc to clarify Code Type 5 encoding This change removes references to the "M" nibble for the "Register Address" encoding of Code Type 5 whis is not used in this mode. In the dword block the "M" has been replaced with a "0" * docs: update cheats doc to clarify register usage on Code Type 5 This adds additional clarification for "Register Address Encoding" mode of Code Type 5 that the "R" nibble reflects both the destination as well as the base memory address. * docs: update cheats doc to make Code Types consistent Code Types are now consistently written in hex notation.
This commit is contained in:
tslater2006
GitHub
parent
0c41489f01
commit
4d430a4c61
@ -40,8 +40,8 @@ The following provides documentation of the instruction format for the virtual m
|
||||
|
||||
Typically, instruction type is encoded in the upper nybble of the first instruction u32.
|
||||
|
||||
### Code Type 0: Store Static Value to Memory
|
||||
Code type 0 allows writing a static value to a memory address.
|
||||
### Code Type 0x0: Store Static Value to Memory
|
||||
Code type 0x0 allows writing a static value to a memory address.
|
||||
|
||||
#### Encoding
|
||||
`0TMR00AA AAAAAAAA VVVVVVVV (VVVVVVVV)`
|
||||
@ -54,8 +54,8 @@ Code type 0 allows writing a static value to a memory address.
|
||||
|
||||
---
|
||||
|
||||
### Code Type 1: Begin Conditional Block
|
||||
Code type 1 performs a comparison of the contents of memory to a static value.
|
||||
### Code Type 0x1: Begin Conditional Block
|
||||
Code type 0x1 performs a comparison of the contents of memory to a static value.
|
||||
|
||||
If the condition is not met, all instructions until the appropriate conditional block terminator are skipped.
|
||||
|
||||
@ -78,16 +78,16 @@ If the condition is not met, all instructions until the appropriate conditional
|
||||
|
||||
---
|
||||
|
||||
### Code Type 2: End Conditional Block
|
||||
Code type 2 marks the end of a conditional block (started by Code Type 1 or Code Type 8).
|
||||
### Code Type 0x2: End Conditional Block
|
||||
Code type 0x2 marks the end of a conditional block (started by Code Type 0x1 or Code Type 0x8).
|
||||
|
||||
#### Encoding
|
||||
`20000000`
|
||||
|
||||
---
|
||||
|
||||
### Code Type 3: Start/End Loop
|
||||
Code type 3 allows for iterating in a loop a fixed number of times.
|
||||
### Code Type 0x3: Start/End Loop
|
||||
Code type 0x3 allows for iterating in a loop a fixed number of times.
|
||||
|
||||
#### Start Loop Encoding
|
||||
`300R0000 VVVVVVVV`
|
||||
@ -102,8 +102,8 @@ Code type 3 allows for iterating in a loop a fixed number of times.
|
||||
|
||||
---
|
||||
|
||||
### Code Type 4: Load Register with Static Value
|
||||
Code type 4 allows setting a register to a constant value.
|
||||
### Code Type 0x4: Load Register with Static Value
|
||||
Code type 0x4 allows setting a register to a constant value.
|
||||
|
||||
#### Encoding
|
||||
`400R0000 VVVVVVVV VVVVVVVV`
|
||||
@ -113,8 +113,8 @@ Code type 4 allows setting a register to a constant value.
|
||||
|
||||
---
|
||||
|
||||
### Code Type 5: Load Register with Memory Value
|
||||
Code type 5 allows loading a value from memory into a register, either using a fixed address or by dereferencing the destination register.
|
||||
### Code Type 0x5: Load Register with Memory Value
|
||||
Code type 0x5 allows loading a value from memory into a register, either using a fixed address or by dereferencing the destination register.
|
||||
|
||||
#### Load From Fixed Address Encoding
|
||||
`5TMR00AA AAAAAAAA`
|
||||
@ -125,17 +125,16 @@ Code type 5 allows loading a value from memory into a register, either using a f
|
||||
+ A: Immediate offset to use from memory region base.
|
||||
|
||||
#### Load from Register Address Encoding
|
||||
`5TMR10AA AAAAAAAA`
|
||||
`5T0R10AA AAAAAAAA`
|
||||
|
||||
+ T: Width of memory read (1, 2, 4, or 8 bytes).
|
||||
+ M: Memory region to write to (0 = Main NSO, 1 = Heap).
|
||||
+ R: Register to load value into.
|
||||
+ R: Register to load value into. (This register is also used as the base memory address).
|
||||
+ A: Immediate offset to use from register R.
|
||||
|
||||
---
|
||||
|
||||
### Code Type 6: Store Static Value to Register Memory Address
|
||||
Code type 6 allows writing a fixed value to a memory address specified by a register.
|
||||
### Code Type 0x6: Store Static Value to Register Memory Address
|
||||
Code type 0x6 allows writing a fixed value to a memory address specified by a register.
|
||||
|
||||
#### Encoding
|
||||
`6T0RIor0 VVVVVVVV VVVVVVVV`
|
||||
@ -149,10 +148,10 @@ Code type 6 allows writing a fixed value to a memory address specified by a regi
|
||||
|
||||
---
|
||||
|
||||
### Code Type 7: Legacy Arithmetic
|
||||
Code type 7 allows performing arithmetic on registers.
|
||||
### Code Type 0x7: Legacy Arithmetic
|
||||
Code type 0x7 allows performing arithmetic on registers.
|
||||
|
||||
However, it has been deprecated by Code type 9, and is only kept for backwards compatibility.
|
||||
However, it has been deprecated by Code type 0x9, and is only kept for backwards compatibility.
|
||||
|
||||
#### Encoding
|
||||
`7T0RC000 VVVVVVVV`
|
||||
@ -171,8 +170,8 @@ However, it has been deprecated by Code type 9, and is only kept for backwards c
|
||||
|
||||
---
|
||||
|
||||
### Code Type 8: Begin Keypress Conditional Block
|
||||
Code type 8 enters or skips a conditional block based on whether a key combination is pressed.
|
||||
### Code Type 0x8: Begin Keypress Conditional Block
|
||||
Code type 0x8 enters or skips a conditional block based on whether a key combination is pressed.
|
||||
|
||||
#### Encoding
|
||||
`8kkkkkkk`
|
||||
@ -213,8 +212,8 @@ Note: This is the direct output of `hidKeysDown()`.
|
||||
|
||||
---
|
||||
|
||||
### Code Type 9: Perform Arithmetic
|
||||
Code type 9 allows performing arithmetic on registers.
|
||||
### Code Type 0x9: Perform Arithmetic
|
||||
Code type 0x9 allows performing arithmetic on registers.
|
||||
|
||||
#### Register Arithmetic Encoding
|
||||
`9TCRS0s0`
|
||||
@ -248,8 +247,8 @@ Code type 9 allows performing arithmetic on registers.
|
||||
|
||||
---
|
||||
|
||||
### Code Type 10: Store Register to Memory Address
|
||||
Code type 10 allows writing a register to memory.
|
||||
### Code Type 0xA: Store Register to Memory Address
|
||||
Code type 0xA allows writing a register to memory.
|
||||
|
||||
#### Encoding
|
||||
`ATSRIOxa (aaaaaaaa)`
|
||||
@ -272,13 +271,13 @@ Code type 10 allows writing a register to memory.
|
||||
|
||||
---
|
||||
|
||||
### Code Type 11: Reserved
|
||||
Code Type 11 is currently reserved for future use.
|
||||
### Code Type 0xB: Reserved
|
||||
Code Type 0xB is currently reserved for future use.
|
||||
|
||||
---
|
||||
|
||||
### Code Type 12-15: Extended-Width Instruction
|
||||
Code Types 12-15 signal to the VM to treat the upper two nybbles of the first dword as instruction type, instead of just the upper nybble.
|
||||
### Code Type 0xC-0xF: Extended-Width Instruction
|
||||
Code Types 0xC-0xF signal to the VM to treat the upper two nybbles of the first dword as instruction type, instead of just the upper nybble.
|
||||
|
||||
This reserves an additional 64 opcodes for future use.
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user