Cool_Tools/Atmosphere
1
0
Fork 0
mirror of https://github.com/Atmosphere-NX/Atmosphere.git synced 2024-12-01 10:47:28 +01:00
Code Issues Packages Projects Releases Wiki Activity
2,769 Commits 42 Branches 82 Tags 31 MiB
726d7b6e4d
Commit Graph

492 Commits

Author SHA1 Message Date
Traiver
b211a7cf05
add kernel patches for 4.1.0 2018-06-17 11:00:42 +02:00
DavidBuchanan314
20a721a4a6 fusee: correct 4.x free_code_space_offset value 2018-06-13 22:26:00 +01:00
DavidBuchanan314
58d2f8f0a5 fusee: Add 3.0.0-3.0.1 kernel hash (and free_code_space_offset) 2018-06-13 22:08:18 +01:00
Tomasz Moń
206c10f333 Rework sdmmc clocking configuration 
Use 204 MHz as host clock in SDR104 mode instead of 136 MHz.
Due to this, also change the frequency init divider so the
initialization frequency is below 400 kHz.
This makes the clocks for SDMMC1 in all modes to match the TRM table.

Make it clear in the code that HS200/HS400 modes in fact use PLLP_OUT0
and not PLLC4_OUT2_LJ like the comment suggest. In fact selecting the
PLLC4_OUT2_LJ as clock source results in freeze after switching to
HS200/HS400 mode. This is most likely related to the PLLC4 not being
enabled, but it should be checked later.

Set the HS200/HS400 divider to 3, as this is what the code really did
set prior to this change - so this commit does not change that.

Configure Legacy 12 MHz clock to run at 12 MHz using the SW default
configuration (as per TRM) for the SDMMC legacy timer.

Introduce initial version of sdmmc_host_clock_delay() in order to use it
in places where the wait is host clock dependent. The way it is
implemented now does not change the sleep that was used instead.
 2018-06-12 17:20:15 +02:00
Max K
d8c9399cff fusee: Run periodic autocal only on the uSD controller (#137) 2018-06-10 21:09:48 -07:00
hexkyz
ceb93867b4
Merge pull request #132 from tslater2006/master 
Add sdmmc_dump_regs function
 2018-06-10 16:21:18 +01:00
Tomasz Moń
804a40830e Fix race conditions and misconfiguration in sdmmc 
Properly configure pull up and pull down offsets for autocal.
Run autocal prior to every transfer.

Prevent race conditions in sdmmc_wait_for_event() - make sure the fault
handler has highest priority, then the target irq, state conditions and
finally the error mask.

Do not clear all bits (|=) when acknowledging fault conditions,
only acknowledge the fault conditions itself.

Enable interrupts before preparing command registers - if sdmmc is fast
enough it can actually finish transfer before we enabled the interrupts.
Enabling interrupts clears the COMMAND COMPLETE status bit.

Temporarily print all the sdmmc messages in stage2 - for yet unknown
reason respecting the log level results in some failures.

This results in working microsd card in stage2 on my switch with Samsung
EVO+ 256GB microsd card.
 2018-06-09 17:37:53 +02:00
Timothy Slater
a79d3454d8 Switched to mmc_debug, and use inttypes 2018-06-08 07:50:36 -05:00
Timothy Slater
7df8ca7c4b use printf instead of printk for secondary 2018-06-07 13:05:41 -05:00
Timothy Slater
ca907077af Add sdmmc_dump_regs function 2018-06-07 12:55:29 -05:00
Tomasz Moń
7b9dcd2f1a Make sdmmc autocalibration follow TRM procedure 
Sleep for 1 us, not 1 ms.
Timeout after 10 ms, set driver strength code values according to TRM.

Fix typo (mS) - time is in milliseconds, not milliSiemens.
 2018-06-05 19:07:14 +02:00
TuxSH
0491a21a99 Fix logic bug in stage2's main function 2018-06-05 16:18:02 +02:00
Max K
6b7da2887f package2 verification and ini1 merging fixes (#125) 
* fusee: Incremet offset while reading kip1s

* fusee: Pass package2 section data along with the decrypted metadata
 2018-06-04 14:04:44 -07:00
TuxSH
b2139ed182 Pass screen status and mmc struct from stage1 to 2 2018-06-04 19:17:23 +02:00
hexkyz
7e5fda86b2
Merge pull request #114 from desowin/sdmmc-errata 
Set SDMMC controller to SDR104 as a workaround
 2018-06-04 16:20:19 +01:00
langerhans
41429e9120 fusee: Add kernel hash for 4.x 2018-06-03 16:59:21 +02:00
Michael Scire
968c86578a Fusee: Add 5.x kernel patches to allow for IPC PID mitm. 2018-06-02 20:01:44 -06:00
Michael Scire
cc69079d73 Fusee: Add mechanism for branching back at end of hook. 2018-06-02 19:11:50 -06:00
Max K
8ec3a53d73 Fix CCPLEX bringup and halt the BPMP once it's done booting. (#118) 2018-06-02 17:24:02 -07:00
Michael Scire
b3a7086b7e Fusee: Add infrastructure for applying kernel patches (needed for mitm) 2018-06-02 16:06:31 -06:00
Michael Scire
1ba8a92030 Fusee: Separate kernel patching into its own file. 2018-06-02 16:06:31 -06:00
Tomasz Moń
0534e36cf8 Set SDMMC controller to SDR104 as a workaround 
According to Tegra X1 Series Processors Silicon Errata there is possible
misalignment of received data which results in a CRC error. The issue is
present only in SDR50 mode.
 2018-05-27 17:43:25 +02:00
TuxSH
c9723d7b68 Refactor fusee's makefile 2018-05-27 00:59:02 +02:00
TuxSH
d57f4c54a9 Fix mmc->allow_voltage_switching assignment in sdmmc_init 2018-05-24 17:39:36 +02:00
TuxSH
4d43a86b60 Copy latest sdmmc driver to stage2 2018-05-24 01:17:13 +02:00
TuxSH
fd77e5543e Add debug comment for exosphère 2018-05-23 18:46:39 +02:00
TuxSH
16ad355f45 Unstub "Validate section hashes." 2018-05-23 18:45:53 +02:00
Kate J. Temkin
eaf8e559d6 fusee: work around some dual-init SDMMC issues 2018-05-23 07:47:02 -06:00
TuxSH
a4b1cf8b50 Stage1: fix SE issue too 2018-05-21 21:18:30 +02:00
Michael Scire
c64d7904b4 Fusee: Fix se_calculate_sha256 2018-05-21 13:07:46 -06:00
TuxSH
561fa90669 Use uintX_t for the SE & copy bugfixed SE struct definition 2018-05-21 19:05:00 +02:00
TuxSH
f39622c421 Stage2: Fix bug, add more debug printfs to nxboot. The CCPLEX doesn't turn on 2018-05-21 18:42:42 +02:00
TuxSH
5920f5a4b0 Stage2: fix various bugs in package2.c 2018-05-21 18:18:12 +02:00
TuxSH
ffd0b5df6a Fix bug in stratosphere_get_ini1, etc. 2018-05-21 17:45:05 +02:00
TuxSH
0e9a304533 stage2: package2: bypass hash checks for now 2018-05-21 17:42:10 +02:00
TuxSH
ecb83903c0 Stage1: fix potential alignment issue 2018-05-21 14:18:03 +02:00
Kate J. Temkin
ac7ee45493 fusee: improve SDR104 frequency and support AUTOCMD23 2018-05-21 04:24:50 -06:00
TuxSH
bf2c6dff25 Stage2: Add exception handlers 2018-05-21 03:50:53 +02:00
TuxSH
c1687905a3 Fix stack overflow when chainloading stage2 2018-05-21 03:42:05 +02:00
TuxSH
ea2693dd2d Fix exception handlers (thanks @fincs) 2018-05-21 03:39:18 +02:00
TuxSH
43d1816ac2 [stage1] Add exception handlers... which somehow don't work? 2018-05-21 02:24:41 +02:00
TuxSH
83d9d874e6 Fusee use CAR reboot for fatal errors 2018-05-20 23:52:09 +02:00
TuxSH
4ec7d0fc82 Remove packed when not needed 2018-05-20 22:57:25 +02:00
TuxSH
57ff5e694a Don't check for panics in stage2 2018-05-20 22:00:11 +02:00
TuxSH
3dd6ec5f6c wtf pmc reboot doesn't fully work -- display doesn't reinitialize 2018-05-20 16:56:15 +02:00
TuxSH
f45bc83bc4 Introduce fatal_error 2018-05-20 16:18:48 +02:00
Kate J. Temkin
add03d5774 fusee: correct computation of tuning block size 2018-05-20 07:21:49 -06:00
Kate J. Temkin
d5411b5b1f fusee: begin adding support for MMC HS modes 2018-05-20 07:05:35 -06:00
Kate J. Temkin
5f3fc8156c fusee: SD: implement tuning, allowing for all SD UHS-I speed 2018-05-20 07:05:35 -06:00
Kate J. Temkin
38350e769c fusee: SD driver: implement everything necessary for UHS except tuning 2018-05-20 07:05:35 -06:00
Kate J. Temkin
633c5e95ed fusee: correct constants in CAR 2018-05-20 07:05:35 -06:00
Kate J. Temkin
817c42efc2 fusee: handle SDMMC speeds sanely 2018-05-20 07:05:35 -06:00
TuxSH
ec7e0d923d Add custom panic driver 2018-05-20 14:11:46 +02:00
TuxSH
c820375a86 Make struct tegra_pmc not packed 2018-05-20 01:40:23 +02:00
TuxSH
64cdd2e63f Actually don't use memcpy in sdmmc 2018-05-19 03:10:06 +02:00
TuxSH
2a98e2e3b8 Sync sdmmc changes between stage1 and 2 2018-05-19 02:50:50 +02:00
TuxSH
2bc2fe1452 Use memcpy instead of raw casts in sdmmc.c 2018-05-19 01:33:07 +02:00
TuxSH
b4eeddd7e1 Revamp all the Makefiles (thanks @fincs @WinterMute) 
... dependencies are now properly handled (e.g. header changes, etc.)
 2018-05-19 01:07:27 +02:00
Kate J. Temkin
7bfdf63a71 fusee sdmmc: don't time out on long reads 2018-05-18 07:43:09 -06:00
TuxSH
e0a5acd0ba [stage2] Add more debugging printfs to package2.c, etc. 2018-05-18 00:24:06 +02:00
TuxSH
993db7ee95 Fix nxboot mkey rev misconception 2018-05-18 00:11:44 +02:00
TuxSH
ec6d05892c Refactor nxboot package2 reading, work around sdmmc issue, other changes 2018-05-17 23:18:33 +02:00
TuxSH
9ed2f92cdc [stage2] Fix some FS bugs 2018-05-17 19:53:42 +02:00
TuxSH
3dac6c9268 Fix bug in fusee: package2.c, etc. 2018-05-17 16:11:10 +02:00
TuxSH
1b07a07353 Fusee: Change package2 loading logic (untested) 2018-05-17 15:56:02 +02:00
Michael Scire
5088851de4 Fusee: fix unused var 2018-05-17 07:15:55 -06:00
Michael Scire
bb1dcb2655 Fusee: Implement BIS crypto functions. 2018-05-17 07:15:29 -06:00
TuxSH
5631b27449 Fix out-of-bounds partition r/w bugs in raw_dev.c 2018-05-17 14:39:16 +02:00
TuxSH
858b40e5fb GPT entry LBA range is inclusive 2018-05-17 14:38:19 +02:00
TuxSH
85bfbeccc3 Fix latest commit 2018-05-17 02:07:11 +02:00
TuxSH
52d2af86b6 Fix BCT version parsing 2018-05-17 01:54:19 +02:00
TuxSH
9309b0bed5 Don't overflow devoptabs, etc. 2018-05-17 01:53:32 +02:00
TuxSH
468a063c03 Load the appropriate package1 key. The warmboot fw is now properly read. 2018-05-16 23:19:55 +02:00
TuxSH
348b2457e0 Fix key derivation regression 2018-05-16 23:04:54 +02:00
TuxSH
c71e7c8c2e [stage2] Add "hexdump" 2018-05-16 19:59:14 +02:00
TuxSH
0d5796fa0b Align crypto buffers to 16 bytes in key_derivation.c 2018-05-16 19:57:36 +02:00
TuxSH
ab4518b9c1 Simplify some logic in derive_nx_keydata 2018-05-16 18:41:16 +02:00
TuxSH
c0617982b8 Fix typo in decrypting all keyblobs (thanks @tslater2006 !) 2018-05-16 16:45:44 +02:00
Michael Scire
1182ea23a5 Fusee: Fix typo when decrypting keyblobs. 2018-05-16 02:39:13 -06:00
Michael Scire
fa71e9cb15 Fusee: Decrypt all keyblobs during key derivation. 2018-05-16 02:06:59 -06:00
TuxSH
f84645e91f Simplify package1_get_encrypted_package1 2018-05-16 02:55:48 +02:00
TuxSH
34a658ce4c Fix package1_read_and_parse_boot0 
Key derivation is now working
 2018-05-16 01:46:08 +02:00
TuxSH
db929925f3 Fix TSEC key fetching, thanks to @rajkosto 2018-05-16 00:37:07 +02:00
TuxSH
6c50723209 Fix tsec.c (thanks @rajkosto @tslater2006), fixes #106 2018-05-15 23:59:20 +02:00
TuxSH
9a86ffec68 Fix diskio.c, etc. 2018-05-15 23:54:33 +02:00
TuxSH
42fd4f73cf Remove stray debug printf in gpt.c 2018-05-15 22:10:45 +02:00
TuxSH
60dbc7c9d7 ┬┴┬┴┤( ͡° ͜ʖ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌├┬┴┬┴ 2018-05-15 21:08:57 +02:00
Luke Street
f5ab896343 [stage2] Invert a few checks 2018-05-15 14:40:18 -04:00
TuxSH
62ebf20e25 Fix typo in nxboot.c 2018-05-15 20:24:37 +02:00
TuxSH
1288f54965 Finish writing stratosphere_get_ini1 2018-05-15 19:50:20 +02:00
TuxSH
3c0436b98f Write more code for stratosphere_get_ini1, make it and its caller take target_firmware 2018-05-15 16:09:06 +02:00
TuxSH
4e1a368b43 Write more of stratosphere_get_ini1 2018-05-15 12:38:07 +02:00
TuxSH
af2de57fdc Embed exosphere, thermosphere, loader, pm, sm into fusee-secondary 
Still needs boot and boot2 to be built as proper KIPs
 2018-05-15 02:45:31 +02:00
TuxSH
d9c2a54464 Make a top-level make build everything in order 2018-05-15 01:30:56 +02:00
TuxSH
172a2b679c Fix strncpy bugs in fusée, etc. 2018-05-15 01:18:05 +02:00
TuxSH
15bba0ba0c Make loadlist empty when booting Horizon, more nxboot.c code 2018-05-14 21:17:06 +02:00
TuxSH
c2b22a6bf2 Write all the needed pk1 code and a large part of the nxboot function 2018-05-14 02:40:35 +02:00
TuxSH
17f4a17d17 [stage2] Add debug printf in main.c 2018-05-14 00:06:48 +02:00
TuxSH
bc7369b5d1 [stage2] Add dump_to_file 2018-05-14 00:03:05 +02:00
TuxSH
8df624a10d Rename sd_utils to fs_utils, etc 2018-05-13 23:49:50 +02:00
TuxSH
a3792d94dc [stage2] Support sector sizes up to 4K in FatFs. 
Note: SD cards always have a sector size of 512 bytes.
 2018-05-13 20:51:57 +02:00
TuxSH
9f53aa13d1 [stage2] Implement disk_status 2018-05-13 20:32:38 +02:00
TuxSH
4f50d412f5 Redesign fs_dev, raw_dev, introducing device_partition and switch_fs. 
In theory, one could mount an encrypted FAT partition itself coming from a disk image, etc.
 2018-05-13 19:53:55 +02:00
TuxSH
396a646fa3 [stage2] Add console_get_framebuffer 2018-05-12 21:39:29 +02:00
TuxSH
9dce3b05ba [stage1] refactor diskio.c 2018-05-12 12:37:41 +02:00
TuxSH
00f08321c7 [stage2] Accomodate raw_mmc_dev to latest sdmmc driver changes 2018-05-12 12:23:07 +02:00
TuxSH
75169790ff stage1 -> stage2 again 2018-05-12 11:00:36 +02:00
TuxSH
50047dffaa [stage1] unstub multiple sector-r/w code 2018-05-12 10:52:04 +02:00
Kate J. Temkin
9f86c75ea4 fusee: undo a silly mistake in longer-than-8K operations 2018-05-11 21:36:46 -07:00
TuxSH
f6f8065417 We actually need the pk1 key 2018-05-11 23:57:48 +02:00
TuxSH
4ada3b6195
Merge pull request #93 from encounter/fix/stage2-args 
Fix stage2_args_t mismatch
 2018-05-11 23:38:25 +02:00
TuxSH
6e43a71b5b Fix misconception in latest commit 2018-05-11 23:12:22 +02:00
TuxSH
3ac3183c85 [stage2] Refactor key_derivation type and function declarations 2018-05-11 23:01:13 +02:00
TuxSH
eb8573093d Move sd init into diskio.c, write code for latest commit 2018-05-11 22:24:40 +02:00
Kate J. Temkin
2b871397c2 fusee: allow sdmmc_read / sdmmc_write of more data than fits in the bounce buffer 2018-05-11 11:28:13 -07:00
TuxSH
f8cf7adad7 Add code to register rawnand, boot0, and bcpkg2 2018-05-10 23:48:41 +02:00
TuxSH
a790760de3 raw_mmc_dev: fields should be u64 2018-05-10 23:23:14 +02:00
TuxSH
4168a33dd1 [stage2] Implement package1_parse_boot0 2018-05-10 22:53:46 +02:00
TuxSH
1dd073d8d2 [stage2] Add bct.h 2018-05-10 21:54:58 +02:00
TuxSH
ac9939b7a1 Apply sdmmc stage1 changes to stage2 2018-05-10 21:36:26 +02:00
Kate J. Temkin
402b69c549 fusee: actually obey the SD spec when switching voltage 2018-05-10 07:10:37 -07:00
TuxSH
5b5aa38486 [stage2] Add GPT parsing code (tested on PC) 2018-05-10 15:16:44 +02:00
Kate J. Temkin
437344fd25 fusee: support low-voltage SDMMC mode 2018-05-10 06:05:28 -07:00
Kate J. Temkin
b20a04ede5 fusee: use full bus width and faster initial clock speed 2018-05-10 06:05:28 -07:00
TuxSH
20c225c829 [stage2] raw_mmc_dev.c: fix various bugs 2018-05-10 00:36:13 +02:00
TuxSH
3e68441040 [stage2] Make console.c manage the display, enable it only when needed 2018-05-09 22:20:14 +02:00
TuxSH
4217d7feef [stage2] Unstub rawmmcdev_write 2018-05-09 20:52:21 +02:00
TuxSH
ff2472385f [sdmmc] sdmmc_handle_cpu_transfer: handle unaligned buffers 2018-05-09 20:46:16 +02:00
TuxSH
b9b13e215f Fix struct tegra_sdmmc definition 
Definition errors were cancelling each other (for the most part)
 2018-05-09 19:33:54 +02:00
TuxSH
3206583db3 [sdmmc] Fix const-correctness issue 2018-05-09 19:11:16 +02:00
TuxSH
7ad818ed93 Use latest sdmmc driver in stage2 2018-05-09 18:01:51 +02:00
TuxSH
694289de0b Add raw_mmc_dev (untested!) 2018-05-09 17:51:13 +02:00
TuxSH
04f9920cc3 Rename g_devices to g_fsdev_devices 2018-05-09 17:26:30 +02:00
TuxSH
3fae01b08f Rewrite condition in fsdev_seek 2018-05-09 17:10:35 +02:00
TuxSH
bf94bf48d2 Refine error in fsdev_mount_device 2018-05-09 14:16:33 +02:00
TuxSH
b2c82c75d0 Make stdout line-buffered 2018-05-09 11:49:10 +02:00
TuxSH
7560abbfbd Fix FindDevice and RemoveDevice calls in fs_dev.c 2018-05-09 11:36:49 +02:00
Luke Street
290fb356a1 stage2: fix init malloc size for stage2_args_t 2018-05-08 23:24:27 -04:00
Luke Street
6dbd8d0aae Fix stage2_args_t mismatch 2018-05-08 23:08:54 -04:00
TuxSH
3682a56062 O_RDONLY is 0 2018-05-09 00:53:13 +02:00
TuxSH
77faa00a57 Rewrite package2.c 2018-05-09 00:19:51 +02:00
TuxSH
7df879d346 Change the allocation logic in stratosphere.c 2018-05-08 18:46:54 +02:00
TuxSH
70bb496388 Refactor stage1's and stage2's main.c files 2018-05-08 16:51:43 +02:00
TuxSH
50498e3b20 Don't deinit the display yet, for now 2018-05-08 15:44:48 +02:00
TuxSH
d43255d484 Fix bug in crt0 2018-05-08 14:56:17 +02:00
TuxSH
461e886244 Make di.c accept arbitrary FB addresses, fix flickering issues 2018-05-08 13:45:37 +02:00
TuxSH
170cd2d8c4 [stage2] Forgot to change that, too 2018-05-08 13:45:37 +02:00
TuxSH
d390ead56f Fix faulty IRAM check in check_32bit_address_range_in_program 2018-05-08 13:45:37 +02:00
TuxSH
880f49cfa5 Fix inverted condition issue in check_32bit_address_range_loadable 2018-05-08 13:45:37 +02:00
TuxSH
1fd098e074 [stage1] Fix DEFAULT_BCT0_FOR_DEBUG 2018-05-08 13:45:37 +02:00
TuxSH
e8306361f0 Rewrote crt0, init, and chainloading code 
start.s, init.c, linker.ld and linker.specs are meant
to be re-used by user applications, should they remove the defines
from init.c and the .chainloader* sections from the linker script
 2018-05-08 13:45:37 +02:00
TuxSH
699ddfc043 Simplify fsdev_set_default_device 2018-05-08 13:44:47 +02:00
TuxSH
5084f09081 Fix warning/error, etc. in fs_dev.c 2018-05-07 23:05:53 +02:00
TuxSH
25db9fcc4a Fix fsdev_set_default_device bug 2018-05-07 14:25:01 +02:00
TuxSH
7695b5bdbd [stage2] Fix the ordering of rules in linker script 2018-05-07 10:53:41 +02:00
Kate J. Temkin
8d071ca7c9 fusee: fix boot partition selection 2018-05-06 22:47:36 -06:00
Kate J. Temkin
f5ed029cdb fusee: fix regression in card detection 2018-05-06 22:32:52 -06:00
Kate J. Temkin
5065a04451 fusee-secondary: don't create 3GiB output files :) 2018-05-06 21:49:42 -06:00
TuxSH
75dfcd07a9 Add chainloader (stage2) (need to edit more files) 2018-05-07 01:02:23 +02:00
TuxSH
2c07b5a2fb Rework fs_dev mount code 2018-05-06 18:41:40 +02:00
TuxSH
a29e800661 Revert "Fix mount code in fs_dev.c" 
This reverts commit 306555e522.
 2018-05-06 18:14:08 +02:00
TuxSH
8b418732ad Upgrade FatFs to R0.13b 2018-05-06 18:00:22 +02:00
TuxSH
4265dc7b65 Don't pass the mmc struct around 2018-05-06 17:22:12 +02:00
TuxSH
68eec056a9 Fix const-correctness issue in sdmmc.h 2018-05-06 15:22:35 +02:00
TuxSH
1aa6b92bc4 Normalize drivers between stage1 and 2 2018-05-06 15:02:13 +02:00
TuxSH
306555e522 Fix mount code in fs_dev.c 2018-05-06 13:03:45 +02:00
TuxSH
8f5a5acb06 Fix the g_bct0 overflow issue, malloc now works 
The linker chose the unused symbol from loader.c.
 2018-05-06 11:46:48 +02:00
TuxSH
6e5d4b8fc9 Fix bss overflow error 2018-05-06 00:45:30 +02:00
TuxSH
8648cac77b [stage2] Remove printk, introduce UTF-8 console stdio 2018-05-05 23:56:18 +02:00
TuxSH
ddea5484b6 [stage1] support utf8 in fatfs 2018-05-05 22:05:11 +02:00
TuxSH
30b9873ab3 Use the bloated string formatting functions from newlib 2018-05-05 18:35:00 +02:00
TuxSH
67b76cc8f1 Instead of passing FatFS structs around, unmount; other changes 2018-05-05 17:33:49 +02:00
TuxSH
0fca6c2296 [stage2] Add fatfs devoptab wrapper, change ffconf accordingly 2018-05-05 16:30:25 +02:00
Kate J. Temkin
8eb8de0e94 fusee: fix an obvious sdmmc error (oops) 2018-05-05 03:29:01 -06:00
Kate J. Temkin
bceb00ad8d fusee: sdmmc: clean up and prepare for better SD/MMC/version separations 2018-05-04 18:48:20 -06:00
Kate J. Temkin
2e362d93da fusee: add support for SDMMC write operations 2018-05-04 17:16:19 -06:00
Michael Scire
553cd236f2 Fusee: fix typo 2018-05-04 16:38:10 -06:00
Michael Scire
9487924973 Fusee: Add #define requirement for pragmatic reasons. 2018-05-04 16:35:33 -06:00
Kate J. Temkin
711f85305b fusee: enable sdmmc loglevel control 2018-05-04 16:15:51 -06:00
Kate J. Temkin
932a5bd645 fusee: fix multiple-block SDMMC transfers 2018-05-04 16:15:18 -06:00
TuxSH
e5fff14689 Move fatfs around 2018-05-05 00:11:22 +02:00
TuxSH
0d344e45af Initialize heap, increase stack size 2018-05-04 23:56:01 +02:00
TuxSH
dc3099781d Change defaut BCT0 for debug 2018-05-04 21:52:38 +02:00
Michael Scire
4199be2460 Merge SD stuff into fusee-secondary. Switch diskio to single-sector reads temporarily 2018-05-04 11:47:05 -06:00
Michael Scire
299b020ecc Push minimally working FATFS. 2018-05-04 11:21:15 -06:00
Kate J. Temkin
010ba9248c fusee: make SDMMC debug printing more manageable 2018-05-04 03:38:41 -06:00
Kate J. Temkin
0120b9ce52 fusee: get uSD working, fix bad no_iopower, and abstract card differences 2018-05-04 03:24:27 -06:00
Kate J. Temkin
99f749ef82 fusee: fix SD pinmuxing / signal integrity issues 2018-05-04 03:24:27 -06:00
Kate J. Temkin
5b3be77f0e fusee: fix drive strength and avoid a pad wear-condition 2018-05-04 03:24:27 -06:00
Kate J. Temkin
fc97c3f773 fusee: merge in most of the microSD card (not fully working) 2018-05-04 03:24:27 -06:00
Kate J. Temkin
608d59c229 fusee: implement partition support; needs some tweeks 2018-05-04 03:24:27 -06:00
Kate J. Temkin
01e3761d4c fusee: sdmmc: use v3 compatibility mode for it's simpler DMA 
we may want to change this at some point to get 64-bit addressing?
 2018-05-04 03:24:27 -06:00
Kate J. Temkin
ef1923ebab fusee: sdmmc: support CPU reads in addition to (broken?) DMA 2018-05-04 03:24:27 -06:00
Kate J. Temkin
21c177804e fusee: sdmmc: handle DMA page boundaries 2018-05-04 03:24:27 -06:00
Kate J. Temkin
534c50fba5 sdmmc: mostly working for eMMC, now 2018-05-04 03:24:27 -06:00
Kate J. Temkin
eb48e06331 fusee: get non-data SDMMC commands fully working on eMMC 2018-05-04 03:24:27 -06:00
Kate J. Temkin
dbb65428e8 fusee: further flesh out sdmmc implementation 2018-05-04 03:24:27 -06:00
Kate J. Temkin
2e3af0c474 fusee: fix issue with SDMMC psuedo-interrupts 2018-05-04 03:24:27 -06:00
Kate J. Temkin
fbe159e4d3 fusee: add missing file 2018-05-04 03:24:27 -06:00
Kate J. Temkin
06bf132022 skeleton SDMMC 2018-05-04 03:24:27 -06:00
Max K
0807aaea2b Fix small issues in the stage2 loader (#78) 
* stage2 loader: Fix loadlist parsing breaking out of the loop too early

* stage2 loader: Use bct0 from the loader context
 2018-05-03 13:08:30 -07:00
Michael Scire
ea609e68d3 Change read_sd_file semantics to return size read. 2018-04-26 04:47:22 -06:00
Rajko Stojadinovic
4e1c12a659 Fusee: Fix BisPartition enum to correctly identify partitions. 
* BisPartition_t was missing SAFE, meaning User and System were using wrong key_source

* Normalize tabs to spaces

* Merge User and System BisPartition_t because they are the same key anyway

* Remove extra newline
 2018-04-25 09:47:39 -07:00
Kate J. Temkin
b5d3ce04e8 fusee: fix missing volatiles in memory utils 2018-04-20 19:12:20 -06:00
Kate J. Temkin
60c0df032d fusee: update header names for starting cpu0 2018-04-20 04:10:44 -06:00
Michael Scire
5742571153 Fusee: Fix overflow condition in SD KIP merging 2018-04-12 02:47:27 -06:00
Michael Scire
75b29e777b Fusee: Update INI1 size after patching 2018-04-11 22:32:45 -06:00
Michael Scire
375a0b3fa8 Fusee: Actually write SD path in stratosphere_merge_inis 2018-04-11 22:10:02 -06:00
Michael Scire
0674c4b64f Stratosphere: Add support for custom KIPs/INI in Fusee 2018-04-11 21:56:11 -06:00
Michael Scire
e5a0cb1abe Fusee Stage 2: Flesh out Package2 patching (implement decryption, fixing of metadata) 2018-04-11 20:29:35 -06:00
Michael Scire
a0d2642bb1 Skeleton out framework for patching package2. 2018-04-11 18:19:01 -06:00
Michael Scire
3c24bfdb79 Fusee Stage2: skeleton more of the nxboot process 2018-04-10 16:37:58 -06:00
Michael Scire
9fadec60c5 Add skeleton architecture for displaying custom splash screen 2018-04-10 16:09:00 -06:00
Michael Scire
87605563d2 Restore incorrectly deleted files 2018-04-10 15:56:45 -06:00
Michael Scire
d6806517c8 Fusee Stage 2: Make references to external (stage 1) memory internal. 2018-04-09 15:44:59 -06:00
Michael Scire
a05bf5b4ce Fusee stage 2: Fix up loader (no stage 3!). Skeleton chainload behavior. 2018-04-09 15:34:23 -06:00
Michael Scire
b85567dff3 Remove stage3 refs from Makefile 2018-04-09 15:16:51 -06:00
Michael Scire
92ef68e84a Turns out we actually don't need a third stage for Fusee 2018-04-09 15:12:54 -06:00
Michael Scire
953c02dfba Update argument passing, add video resume 2018-04-08 13:51:44 -06:00
Michael Scire
82552b5a89 Implement much of the core Stage2 loader logic for Fusee 2018-04-08 05:51:57 -06:00
Michael Scire
c9909b34db Use argc/argv in Stage 2 2018-04-08 05:13:15 -06:00
Michael Scire
39bf3cb800 Add display/printk to fusee stage2 2018-04-08 05:06:47 -06:00
Michael Scire
c758b1188a Fix start.s in stage2 of Fusee for argc/argv 2018-04-08 05:06:04 -06:00
Michael Scire
353019a269 Add debugging prints, enable backlight for stage1 2018-04-07 23:04:30 -06:00
Michael Scire
33f76545df Implement all core Stage 1 logic for Fusee 2018-04-07 22:51:24 -06:00
Michael Scire
18f1274587 Change fusee folder naming 2018-04-07 21:45:57 -06:00
Michael Scire
2c7d6dc9b7 Sketch out more of fusee 2018-04-07 15:43:54 -06:00
hexkyz
b310824dac SDMMC: Adding register definitions and draft files 2018-04-04 22:31:05 +01:00
Kate J. Temkin
a73ef0eab1 fusee: fix critical rendering bug 2018-04-03 05:16:13 -06:00
Kate J. Temkin
9766cabdef fusee: jeez, srsly, kate, include all the files when you commit 2018-04-03 04:49:02 -06:00
Kate J. Temkin
0c13e5a2c1 fusee: commit a straggler for flicker removal 2018-04-03 04:15:48 -06:00
Kate J. Temkin
3f40a89316 fusee: don't flicker as we turn the display on 
Defers backlight init until the framebuffer's fully set up.
 2018-04-03 03:56:50 -06:00
Michael Scire
2d8812ac6e Implement BIS Key derivation. 2018-03-31 15:40:23 -06:00
Michael Scire
19178d6176 Fix XTS implementation, now verified working on HW. 2018-03-31 15:40:23 -06:00
Michael Scire
edf9e2f5c7 Prevent compiler optimization of SE LL writes 2018-03-29 13:46:10 -06:00
Michael Scire
6ed9123c24 Implement NX Key Derivation. 2018-03-29 13:14:58 -06:00
Kate J. Temkin
57853602df fusee: add basic print-to-display console / printk 2018-03-27 05:28:28 -06:00
Michael Scire
9ab7d66524 Implement SE XTS driver code for fusee 2018-03-25 18:50:56 -06:00
Michael Scire
53cf46d20f Clean up Fusee's SE API, removing unneeded functionality 2018-03-25 17:16:17 -06:00
TuxSH
c6ee1bffb7 Display PoC 2018-03-15 23:12:38 +01:00
TuxSH
b48e71ab82 Import hwinit (with small changes) and exosphère drivers 2018-03-15 16:14:41 +01:00
TuxSH
171c82ea9e Add build system for fusee 2018-03-14 21:14:02 +01:00