Two major improvements:
1) see through scrollbars when not hovered.
2) un-scrollable line numbers.
Also enlarged display region by eliminating padding. There is still a
problem with lines jumping when the scrollbar is dragged but it is
limited to one line and probably due to floating point error for scroll
bar number. It is much less noticeable than the previous jumping which
could involve several pages.
---------
Co-authored-by: WerWolv <werwolv98@gmail.com>
This time it may be for good.
### Implementation description
As requested I added the preprocessing functionality into the pattern
editor. I had to duplicate a few functions and update the c++ library to
version 20. but now I can make sure the pattern editor doesn't see a tab
again. I also removed the preprocessor from where it was before because
it is not needed anymore. The changes were tested using a file that used
tabs for all its white space. The file was pasted into the pattern
editor and imported as well. I both cases no crashes occurred and the
files had no tabs on them.
### Problem description
This PR implements the feature request described in #1995, that
describes a problem with the `Paste` vs `Paste all` commands. Users
could be thrown off by having `Ctrl+V` act as a simple "Paste over
selection", whereas it's generally accepted as a "Paste all".
### Implementation description
<!-- Explain what you did to correct the problem -->
This PR introduces a new setting, called "Paste behaviour" (under the
"Hex Editor" category).
This setting has three values:
- `Paste over selection`: the current implementation for ImHex. Pastes
only over the selection region, in this case pasting only one byte;
- `Paste everything`: allows ImHex's `Paste` to behave like a `Paste
all` when selecting one-byte regions;
- `Ask me next time`: prompts the user for a choice of behaviour
(default value).
*Note: as users generally use `Paste all` when selecting one-byte
regions, calling `Paste` when selecting over two or more bytes is not
affected by this change, and will still behave like the usual `Paste`
command.*
When selecting a one-byte region, and calling the Paste command, users
that have not defined a preferred behaviour in the settings will be
prompted to choose one, using a brand new popup. The popup also allows
the user to cancel, which will not change the settings' value, and will
cancel the paste action altogether.
### Screenshots
The new popup:
The new setting:
### Additional things
I'm not very good with long descriptions, so I'm open to any suggestions
regarding the text that is included in the popup!
I do think however that we should keep a hint indicating that `Paste
all` is always an option, which could solve the issue altogether for
very new users.
---------
Signed-off-by: BioTheWolff <47079795+BioTheWolff@users.noreply.github.com>
Co-authored-by: Nik <werwolv98@gmail.com>
<!--
Please provide as much information as possible about what your PR aims
to do.
PRs with no description will most likely be closed until more
information is provided.
If you're planing on changing fundamental behaviour or add big new
features, please open a GitHub Issue first before starting to work on
it.
If it's not something big and you still want to contact us about it,
feel free to do so !
-->
### Problem description
<!-- Describe the bug that you fixed/feature request that you
implemented, or link to an existing issue describing it -->
### Implementation description
<!-- Explain what you did to correct the problem -->
### Screenshots
<!-- If your change is visual, take a screenshot showing it. Ideally,
make before/after sceenshots -->
### Additional things
<!-- Anything else you would like to say -->
### Problem description
As suggested in #1904, ImHex could benefit from having the capability of
pasting text directly into the editor.
This also complements the "Copy as... ASCII string" capability already
implemented in the software.
### Implementation description
A new shortcut called `Paste all as string` (to resemble the naming of
the `ASCII string` copy option) now allows to paste plaintext directly.
This shortcut is mapped to the `CTRL + ALT + SHIFT + V` keybind.
Internally, a new flag called `asPlainText` has been added to the
`pasteBytes` function, to minimise code changes and streamline code
readability.
The buffer is a simple type cast of the clipboard, without any
modification applied, which is then handed to the provider's `write`
function.
### Screenshots
The new shortcut is visible in the menu, just below the other paste
options:
---------
Signed-off-by: BioTheWolff <47079795+BioTheWolff@users.noreply.github.com>
Since the popup is fairly small I opted for a straight addition parallel
to the find/replace. To make code more clear the functions that create
each popup were coalesced and made their interface simpler. That forced
a reorganization of the data processing which translates to a larger
number of changes than usual. Most of those changes are just moving some
action from one function to another.
The old method to identify popups using the size and position of the
window was dropped in favor of one based on child windows and using
their names for a much easier and robust identification.
Added specialized functions to text editor to jump to a line or to given
coordinates with a simple interface that simplifies older code that
performed the same task.
Because this PR modifies heavily the same code as the previous PR (1983)
it is also included here to make merging easier.
---------
Co-authored-by: Nik <werwolv98@gmail.com>
Errors printed in the console can be clicked to have the cursor jump to
the source code line where the error is at.
The mouse cursor changes its shape to indicate which parts of the error
message can be clicked on the console. When the cursor jumps, the text
editor takes the focus away from the console and it scrolls the window
to make the line with the error is visible if it isn't. This code uses
the function created for the go-to PR but adds code to switch focus to
the target. When the codes are merged please keep both the part that
jumps the cursor and the part that sets the focus.
---------
Co-authored-by: Nik <werwolv98@gmail.com>
### Problem description
As described in #1846:
- the `Edit the Hex` achievement doesn't unlock when it should
- the `ROM Hacks` achievement is not using event-driven architecture
(the functions call `unlockAchievement` themselves)
### Implementation description
Firstly, for the `Edit the Hex` achievement:
- replaced the old event listener on `EventPatchCreated` with a listener
on `EventProviderDataModified`, which picks up bytes changes
- ensured the provider data change comes from a File provider, else
unlocking the achievement wouldn't make sense
- *Note*: a discovered side effect is that the "Fill" function modifies
the provider byte per byte (with a for loop)
- there is no use in testing the size of the data change, as it is
always 1 byte
- the Fill function could probably be reworked to fill in whole regions
at a time?
About the `ROM Hacks` achievement:
- implemented the new, still unused `EventPatchCreated` event.
- signal signature is `const unsigned char *, u64, const IPSKind`:
buffer pointer, buffer size, and IPS kind (IPS/IPS32)
- make use of the `::post` and `::subscribe` methods on said event to
unlock the achievement
- **WARNING::behaviour change**: the event's `post` signal has been
moved in the success branch of the IPS generation condition, meaning
that achievement will only unlock if IPS patch export has worked. I felt
it would make more sense than unlocking an achievement on an error, if
there was any to raise.
---------
Signed-off-by: BioTheWolff <47079795+BioTheWolff@users.noreply.github.com>
Fix the AES ECB mode in the data processor along with some other misc
fixes:
- Fixed nullpointer node not working
- Fixed crypto module incorrectly using mbedtls api
- Fixed crypto module ignoring mbedtls errors
- Fixed silently ignoring of errors in AES node
Some context menu entries that were available as shortcuts were greyed
out. This PR aims to fix them and improve how context menus work for the
text editor and the console. The improvements include:
- automatic focus on right click
- automatic selection on right click. If selected text is right-clicked
then copy, cut and find will use the selection, if no selection is
clicked but there is text were right-clicked, then the word will be
selected and used. If right-clicking empty space copy and cut will be
greyed out and find will start empty.
- similar functionality now exists for the console as well except the
menu has fewer options due to it being read-only.
- added esc to close console context menu
### Problem description
At the moment, attempting to edit files using HexII data visualization
is impossible as the editing fields only allow numeric characters but is
interpreted as a hex value
### Implementation description
I yoinked the params used for the hex visualization edit field.
### Screenshots
### Additional things
Ideally this should instead accept the format used by HexII, but I have
what scientists describe as a skill issue and this at least makes it
possible to use HexII without switching back to hex for editing.
### Problem description
This PR aims at making inline visualizers work on the data inspector so
that more rgb encodings can be added as custom pattern language
inspector rows. This was never setup to work because the inline
visualizer rendering function was a private member function.
### Implementation description
In order to be accessible from the inspector class the rendering
function was made public.
### Additional things
Missing still is the tooltip to make it behave like other color entries.
WARNING: this PR won't compile unless [PR 132 from pattern language
repository](https://github.com/WerWolv/PatternLanguage/pull/132) is
merged first. Some changes here are shared by at least another PR to
this repository but there should not be any conflicts as the shared
changes are identical.
### Problem description
fix: Editing patterns with breakpoints sets behaves unexpectedly. As a
simple example, set a breakpoint and insert a blank line somewhere
before the breakpoint location. The breakpoint will appear to move but
in reality it hasn't. To see this set another breakpoint elsewhere in
the file and the old one will be displayed where it is really located
at.
The reason for this and many other problems with breakpoints is that
currently ImHex keeps two set of breakpoints in text editor and in
evaluator that are independent of each other, ie, changes to one don't
affect the other. This PR aims at synchronizing the two sets through the
per provider breakpoints that exist in view pattern editor.
### Implementation description
It accomplishes this by making the text editor version of breakpoints
the principal source of vectors and the ones in evaluator the effective
version. The first allows one to modify the text around and at the
breakpoint and notify others that the changes have induced changes in
the breakpoint locations. The effective breakpoints allow the insertion
and deletion of breakpoints.
View pattern editor is where breakpoints are updated. It receives
notifications from text editor about changes and then makes sure the
version in evaluator is updated with those changes. View pattern editor
also manages breakpoint addition and deletion so before making changes
it gets a copy of the current ones from text editor, sets the ones in
evaluator, uses the evaluator functions to add or delete breakpoints and
finally sets the text editor version with the new version.
This code fixes issue #1950 This PR depends on PR [#27
](https://github.com/WerWolv/libwolv/pull/27) on libwolv repo
### Problem description
See description of the problem on the issue linked above
### Implementation description
The code in the PR uses function added to the libwolv repository to
remove tabs if they exist on the provider. Additionally, any pasted tab
on the pattern editor will be translated to spaces automatically. This
code was tested successfully using the pattern posted in the issue.
### Problem description
fix: pressing F5 (start pattern execution ) while being in a break point
hangs ImHex.
The reason for hanging ImHex was that the shortcut procedure was not
checking if the pattern was already running, and it attempted to start
another one. This makes ImHex wait indefinitely for a lock to be
released
### Implementation description
To fix the hanging of ImHex we check the runtime for current evaluation
and if detected we stop it. In all cases the evaluation is started
again.
### Problem description
Fixes provided for the following unreported bugs.
- Environment variables are set to be per provider but used as if they
are not. When a project is loaded all the environment variables for each
provider are assigned to the first provider making it impossible to add
new ones to the other providers.
- When switching providers, the text editor selection, the text editor
breakpoints, the console text, the console selection and the console
cursor position of the old provider are being assigned to the new
provider
### Implementation description
This PR aims at fixing both errors by:
- using variable defined to be per provider so that they affect their
provider only when necessary.
- creating new per provider variables and using them so that each
provider has their own console, selections and breakpoints.
In order to support the newly added per provided features new functions
were added to the text processor for selections and breakpoints. All the
new per provider variables are defined and used in view pattern editor.
Fixes https://github.com/WerWolv/ImHex/issues/1807
### Problem description
Build fails for MacOS x86-64 due to using a wrong architecture header.
### Implementation description
Used the headers for mach that auto select the correct architecture.
### Additional things
This is being used in https://github.com/NixOS/nixpkgs/pull/330303 as a
patch
Co-authored-by: Nik <werwolv98@gmail.com>
### Problem description
Moving error markers to be underwaved created s couple of errors:
- Markers that were 1 char long and located at the end of the line
didn't show on text editor.
- Markers that had zero length or no stack trace didn't show on text
editor.
### Implementation description
- The first error was caused by an off by one error in the column index.
- There was no implementation for errors that had no location or zero
length. Now errors with no location will be shown at the beginning of
the line where they occur. Errors with zero length will be marked from
their location to the end of the line, therefore, errors with no stack
trace will be marked from the beginning to the end of the line.
