added a super-duper raw xy command and a way to toggle GPIO_0

Hardware/KiCAD/JumperlessRev3point1/~JumperlessRev3point1.kicad_sch.lck

@@ -1 +0,0 @@
-{"hostname":"Kevins-MacBook-Pro","username":"kevinsanto"}

JumperlessNano/src/FileParsing.cpp

@@ -16,10 +16,10 @@
 bool debugFP = EEPROM.read(DEBUG_FILEPARSINGADDRESS);
 bool debugFPtime = EEPROM.read(TIME_FILEPARSINGADDRESS);
 
-createSafeString(nodeFileString, 1200);
+createSafeString(nodeFileString, 3000);
 
 int numConnsJson = 0;
-createSafeString(specialFunctionsString, 800);
+createSafeString(specialFunctionsString, 3000);
 
 char inputBuffer[INPUTBUFFERLENGTH] = {0};
 
@@ -38,6 +38,10 @@ unsigned long timeToFP = 0;
 const char rotaryConnectionString[] =
     "{AREF-GND,D11-GND,D10-UART_TX,D12-UART_RX,D13-GPIO_0, ";
 
+
+
+
+
 void createSlots(int slot, int addRotaryConnections) {
   /// delay(2000);
   if (slot == -1) {
@@ -88,7 +92,7 @@ void createSlots(int slot, int addRotaryConnections) {
       // }
       // nodeFileString.printTo(Serial);
       nodeFile.seek(0);
-      if (nodeFile.size() <= 10) {
+      if (nodeFile.size() <= 5) {
         nodeFile = LittleFS.open("nodeFileSlot" + String(i) + ".txt", "w+");
 
         if (i >= 0) {
@@ -127,6 +131,138 @@ void createSlots(int slot, int addRotaryConnections) {
     nodeFile.close();
   }
 }
+
+
+int rawConn[4]; //connect/clear, chip, x, y
+int parseRaw(int connectOrClear) {
+  // Serial.println("Parsing raw");
+    unsigned long humanTime = millis();
+
+  int shown = 0;
+
+  int connectClear = connectOrClear;
+  int chip = -1;
+  int x = -1;
+  int y = -1;
+
+
+  while (Serial.available() == 0) {
+    if (millis() - humanTime == 300 && shown == 0) {
+        Serial.print("\th/H [clear/CONNECT], chip [A-L/0-11], X [0-15], Y [0-7]\n\n\r");
+    Serial.print("\t\tExample: H,d,13,5\n\r");
+      shown = 1;
+      //break; 
+    }
+    if (millis() - humanTime == 2000 && shown == 1) {
+       return 0;
+    }
+  }
+
+  // nodeFileString.clear();
+
+  // nodeFileString.readUntil(Serial,',');
+  // nodeFileString.trim();  
+  // Serial.print("\n\rconnectClear: ");
+  // nodeFileString.printTo(Serial);
+
+  // if (nodeFileString == "h" || nodeFileString == "H") {
+  //   connectClear = 0;
+  // } else {
+  //   connectClear = 0;
+  // }
+  nodeFileString.clear();
+  nodeFileString.readUntil(Serial,',');
+    nodeFileString.clear();
+  nodeFileString.readUntil(Serial,',');
+  nodeFileString.trim();
+    nodeFileString.replace(",", "");
+
+  Serial.print("\n\rchip: ");
+  nodeFileString.printTo(Serial);
+  //Serial.print("  ->  ");
+
+  nodeFileString.replace("\n", "");
+  nodeFileString.replace("\r", "");
+  nodeFileString.replace("a", "0");
+  nodeFileString.replace("b", "1");
+  nodeFileString.replace("c", "2");
+  nodeFileString.replace("d", "3");
+  nodeFileString.replace("e", "4");
+  nodeFileString.replace("f", "5");
+  nodeFileString.replace("g", "6");
+  nodeFileString.replace("h", "7");
+  nodeFileString.replace("i", "8");
+  nodeFileString.replace("j", "9");
+  nodeFileString.replace("k", "10");
+  nodeFileString.replace("l", "11");
+
+  nodeFileString.replace("A", "0");
+  nodeFileString.replace("B", "1");
+  nodeFileString.replace("C", "2");
+  nodeFileString.replace("D", "3");
+  nodeFileString.replace("E", "4");
+  nodeFileString.replace("F", "5");
+  nodeFileString.replace("G", "6");
+  nodeFileString.replace("H", "7");
+  nodeFileString.replace("I", "8");
+  nodeFileString.replace("J", "9");
+  nodeFileString.replace("K", "10");
+  nodeFileString.replace("L", "11");
+  nodeFileString.replace(",", "");
+
+  //nodeFileString.printTo(Serial);
+
+nodeFileString.toInt(chip);
+  nodeFileString.clear();
+   
+  nodeFileString.readUntil(Serial,',');
+     nodeFileString.replace(",", "");
+  nodeFileString.trim();
+  Serial.print("\n\rX: ");
+  nodeFileString.printTo(Serial);
+
+nodeFileString.toInt(x);
+  nodeFileString.clear();
+  nodeFileString.readUntil(Serial,',');
+      nodeFileString.replace(",", "");
+  nodeFileString.trim();
+  Serial.print("\n\rY: ");
+  nodeFileString.printTo(Serial);
+
+nodeFileString.toInt(y);
+
+Serial.println();
+// Serial.println(chip);
+// Serial.println(x);
+// Serial.println(y);
+
+
+
+if (chip < 0 || chip > 11 || x < 0 || x > 15 || y < 0 || y > 7)
+{
+    Serial.println("Invalid input");
+    return 0;
+}
+
+  rawConn[0] = connectClear;
+  rawConn[1] = chip;
+  rawConn[2] = x;
+  rawConn[3] = y;
+
+  return 1;
+
+
+
+
+
+
+
+}
+
+
+
+
+
 void inputNodeFileList(int addRotaryConnections) {
   // addRotaryConnections = 1;
   // Serial.println("Paste the nodeFile list here\n\n\r");

JumperlessNano/src/FileParsing.h

@@ -16,6 +16,8 @@ extern bool debugMM;
 
 extern int loadFileOnStart;
 
+extern int rawConn[4]; //connect/clear, chip, x, y
+
 // #include "RotaryEncoder.h"
 
 
@@ -31,7 +33,7 @@ void addBridgeToNodeFile(int node1, int node2, int slot = 0);
 void savePreformattedNodeFile (int source = 0, int slot = 0, int keepEncoder = 1);
 
 void openNodeFile(int slot = 0);
-
+int parseRaw(int connectOrClear = 1);
 void splitStringToFields();
 
 void replaceSFNamesWithDefinedInts();

JumperlessNano/src/RotaryEncoder.cpp

@@ -29,6 +29,8 @@ volatile int rotaryEncoderMode = 0;
 
 volatile int slotPreview = 0;
 
+bool rotaryEncoderInitialized = false;
+
 
 void initRotaryEncoder(void)
 {
@@ -39,6 +41,7 @@ void initRotaryEncoder(void)
     offsetEnc = pio_add_program(pioEnc, &quadrature_program);
     smEnc = pio_claim_unused_sm(pioEnc, true);
     quadrature_program_init(pioEnc, smEnc, offsetEnc, QUADRATURE_A_PIN, QUADRATURE_B_PIN);
+    rotaryEncoderInitialized = true;
 }
 
 void unInitRotaryEncoder(void)

JumperlessNano/src/RotaryEncoder.h

@@ -7,6 +7,8 @@ extern volatile int rotaryEncoderMode;
 extern int netSlot;
 extern volatile int slotChanged;
 
+extern bool rotaryEncoderInitialized;
+
 extern volatile int slotPreview;
 extern int rotState;
 extern int encoderIsPressed;

JumperlessNano/src/main.cpp

@@ -135,10 +135,11 @@ void setup() {
   // if (rotaryEncoderMode == 1)
   // {
   // rotEncInit = 1;
-  initRotaryEncoder();
+  // initRotaryEncoder();
   //}
   initADC();
-
+  pinMode(0, OUTPUT);
+  digitalWrite(0, LOW);
   // delay(20);
   // setupAdcUsbStuff(); // I took this out because it was causing a crash on
   delay(10);
@@ -171,7 +172,7 @@ int readInNodesArduino = 0;
 
 int restoredNodeFile = 0;
 
-const char firmwareVersion[] = "1.3.19"; //// remember to update this
+const char firmwareVersion[] = "1.3.20"; //// remember to update this
 
 int firstLoop = 1;
 volatile int probeActive = 1;
@@ -207,12 +208,16 @@ menu:
   rotaryEncoderMode == 1 ? Serial.print(" ON (z/x to cycle)\n\r")
                          : Serial.print(" off\n\r");
   Serial.print("\t\b\bz/x = cycle slots - current slot ");
+
   Serial.print(netSlot);
+
   Serial.print("\n\r");
+  Serial.print("\t\b\bq/Q = set GPIO 0 low/HIGH\n\r");
   Serial.print("\te = show extra menu options\n\r");
 
   if (showExtraMenu == 1) {
     Serial.print("\tb = show bridge array\n\r");
+    Serial.print("\th = send raw XY paths\n\r");
     Serial.print("\tp = probe connections\n\r");
     Serial.print("\tw = waveGen\n\r");
     Serial.print("\tv = toggle show current/voltage\n\r");
@@ -264,9 +269,9 @@ dontshowmenu:
       // Serial.print("\n\n\r");
       // showLEDsCore2 = 1;
     }
-    if (BOOTSEL) {
-      lastNetConfirm(1);
-    }
+    // if (BOOTSEL) {
+    //   //lastNetConfirm(1);
+    // }
 
     if ((millis() % 200) < 5) {
       if (checkProbeButton() == 1) {
@@ -306,6 +311,20 @@ dontshowmenu:
 // Serial.print(input);
 skipinput:
   switch (input) {
+  case 'H': {
+    if (parseRaw(1) == 1) {
+      sendXYraw(rawConn[1], rawConn[2], rawConn[3], 1);
+    }
+    break;
+  }
+  case 'h': {
+
+    if (parseRaw(0) == 1) {
+      sendXYraw(rawConn[1], rawConn[2], rawConn[3], 0);
+    }
+
+    break;
+  }
   case '?': {
     Serial.print("Jumperless firmware version: ");
     Serial.println(firmwareVersion);
@@ -750,6 +769,14 @@ skipinput:
 
     break;
   }
+  case 'q': {
+    digitalWrite(0, LOW);
+    break;
+  }
+  case 'Q': {
+    digitalWrite(0, HIGH);
+    break;
+  }
   case 'f':
 
     probeActive = 1;
@@ -759,7 +786,7 @@ skipinput:
     // sendAllPathsCore2 = 1;
     timer = millis();
 
-    //clearNodeFile(netSlot);
+    // clearNodeFile(netSlot);
     digitalWrite(RESETPIN, HIGH);
     if (connectFromArduino != '\0') {
       serSource = 1;
@@ -857,7 +884,10 @@ skipinput:
     break;
 
   case 'r':
-
+    if (rotaryEncoderInitialized == 0) {
+      initRotaryEncoder();
+      rotaryEncoderInitialized = 1;
+    }
     if (rotaryEncoderMode == 1) {
       // unInitRotaryEncoder();