From 447a8ba16662e50d499ed1ffd57a1e67e41c026d Mon Sep 17 00:00:00 2001 From: Kevin Santo Cappuccio Date: Sun, 17 Nov 2024 11:03:54 -0800 Subject: [PATCH] Create Probe_Guide.md --- Probe_Guide.md | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Probe_Guide.md diff --git a/Probe_Guide.md b/Probe_Guide.md new file mode 100644 index 0000000..44c5936 --- /dev/null +++ b/Probe_Guide.md @@ -0,0 +1,36 @@ +# Probe Kit Assembly Guide +![probePCB copy](https://github.com/user-attachments/assets/ac8bf8a3-5925-482b-8a0c-045cf857685b) + + +Square holes connect to the Probe +Round holes connect to the Button +![pobeCircuit](https://github.com/user-attachments/assets/14849a79-7de1-4cee-9ee5-20d73590c264) + +Lift the middle tab and solder your favorite button facing +down so it can be pressed by pushing on the bar (pro tip: +stick something in there to keep it down while soldering) + +Break off that triangular tab at the end and solder +it to the end of the wires that connect to the Jumperless. +The 2mm pitch header pins should friction fit into the +2.54mm spaced holes 18 and 19 at the top left corner. +![probePCB copy](https://github.com/user-attachments/assets/074b590f-71d9-4b72-abf1-19dede25eba1) + +Strip the single wire wrap wire (you can use your fingernails) +and lace it through the holes around the needle tip, then +slide the needle under it and flood the whole pad with solder +![probePCB copylaceNeedle](https://github.com/user-attachments/assets/12e67f86-bd8d-4c0d-acf6-6764eae8489c) + + + +Remember to bridge those pill-shaped pads with a tiny dot +of solder at the end of the rows connecting to your button. +![JumperlessProbe2](https://github.com/user-attachments/assets/ab38888e-b2ed-4f44-a5d4-00dc7dd7c433) + +If pressing the button puts the Jumperless in probe mode +but doesn’t light the LED or sense rows, the Button and +Probe connections are swapped, just turn the connector around. + + +Or just have fun with it and do it however the hell you want! +I’m a piece of paper, not a cop.