I broke something in the last release, this should fix it

Hardware/KiCAD/JumperlessRev3point1/~JumperlessRev3point1.kicad_sch.lck

@@ -1 +0,0 @@
-{"hostname":"Kevins-MBP","username":"kevinsanto"}

JumperlessNano/src/FileParsing.cpp

@@ -1508,6 +1508,7 @@ void debugFlagInit(void)
     rotaryEncoderMode = EEPROM.read(ROTARYENCODER_MODE_ADDRESS);
 
     probeSwap = EEPROM.read(PROBESWAPADDRESS);
+    loadFileOnStart = EEPROM.read(LOADFILEONSTART_ADDRESS);
 
 #else
 
@@ -1522,6 +1523,8 @@ void debugFlagInit(void)
 
     // debugLEDs = 1;
 #endif
+    if (loadFileOnStart != 0 && loadFileOnStart != 1)
+        EEPROM.write(LOADFILEONSTART_ADDRESS, 0);
 
     if (debugFP != 0 && debugFP != 1)
         EEPROM.write(DEBUG_FILEPARSINGADDRESS, 0);
@@ -1747,6 +1750,22 @@ void debugFlagSet(int flag)
         }
         break;
     }
+    case 7:
+    {
+        if (loadFileOnStart == 0)
+        {
+            EEPROM.write(LOADFILEONSTART_ADDRESS, 1);
+
+            loadFileOnStart = 1;
+        }
+        else
+        {
+            EEPROM.write(LOADFILEONSTART_ADDRESS, 0);
+
+            loadFileOnStart = 0;
+        }
+        break;
+    }
     }
     delay(4);
     EEPROM.commit();

JumperlessNano/src/FileParsing.h

@@ -14,6 +14,8 @@ extern bool debugNTCC2;
 extern bool debugLEDs;
 extern bool debugMM;
 
+extern int loadFileOnStart;
+
 // #include "RotaryEncoder.h"
 
 

JumperlessNano/src/JumperlessDefinesRP2040.h

@@ -21,7 +21,7 @@ extern volatile int sendAllPathsCore2;
 #define BUTTON_ENC 0
 
 
-
+#define LOADFILEONSTART_ADDRESS 29
 #define ROTARYENCODER_MODE_ADDRESS 31
 #define DEBUG_FILEPARSINGADDRESS 32
 #define TIME_FILEPARSINGADDRESS 33

JumperlessNano/src/LEDs.cpp

@@ -579,11 +579,12 @@ void showSavedColors(int slot)
         // delayMicroseconds(100);
         // saveRawColors(slot);
     }
-    if (rotaryEncoderMode == 1)
-    {
+
         for (int i = 0; i < LED_COUNT; i++)
         {
             leds.setPixelColor(i, savedLEDcolors[slot][i]);
+                if (rotaryEncoderMode == 1)
+    {
 
             if (i == slotLEDpositions[netSlot])
             {
@@ -832,7 +833,7 @@ void lightUpNet(int netNumber, int node, int onOff, int brightness2, int hueShif
     //     Serial.print(node);
     //     Serial.print(" onOff: ");
     //     Serial.print(onOff);
-    if (net[netNumber].nodes[1] != 0 && net[netNumber].nodes[1] <= NANO_A7)
+    if ((net[netNumber].nodes[1] != 0 && net[netNumber].nodes[1] <= NANO_A7 )||net[netNumber].nodes[0] != 0 && net[netNumber].nodes[0] <= NANO_A7 )
     {
 
         for (int j = 0; j < MAX_NODES; j++)

JumperlessNano/src/Probing.cpp

@@ -589,7 +589,7 @@ probeActive = 1;
     assignNetColors();
     // // Serial.print("bridgesToPaths\n\r");
     // delay(18);
-     showNets();
+     //showNets();
      showLEDsCore2 = 1;
     rawOtherColors[1] = 0x550004;
     showLEDsCore2 = 1;
@@ -597,7 +597,7 @@ probeActive = 1;
     sendAllPathsCore2 = 1;
     // delay(25);
     // pinMode(probePin, INPUT);
-    delay(300);
+    delay(100);
     row[1] = -2;
 
     // sprintf(oledBuffer, "        ");

JumperlessNano/src/main.cpp

@@ -75,9 +75,12 @@ unsigned long lastNetConfirmTimer = 0;
 
 volatile int sendAllPathsCore2 = 0; // this signals the core 2 to send all the paths to the CH446Q
 
+int loadFileOnStart = 1;
 int rotEncInit = 0;
 // https://wokwi.com/projects/367384677537829889
 
+int core2setupFinished = 0;
+
 void setup()
 {
   pinMode(0, OUTPUT);
@@ -117,7 +120,12 @@ void setup()
 
   setDac0_5Vvoltage(0.0);
   setDac1_8Vvoltage(1.9);
-  createSlots(-1, rotaryEncoderMode);
+
+ // if (rotaryEncoderMode == 1)
+ // {
+    createSlots(-1, rotaryEncoderMode);
+ //}
+  //
   clearAllNTCC();
 
   // if (rotaryEncoderMode == 1)
@@ -143,7 +151,7 @@ void setup1()
   startupColors();
   delay(4);
   lightUpRail();
-
+core2setupFinished = 1;
   delay(4);
 
   showLEDsCore2 = 1;
@@ -159,7 +167,7 @@ int baudRate = 115200;
 
 int restoredNodeFile = 0;
 
-const char firmwareVersion[] = "1.3.13"; //// remember to update this
+const char firmwareVersion[] = "1.3.15"; //// remember to update this
 
 int firstLoop = 1;
 volatile int probeActive = 1;
@@ -222,6 +230,14 @@ menu:
 
     goto loadfile;
   }
+  // if (firstLoop == 1 && rotaryEncoderMode == 0 && loadFileOnStart == 1)
+  // {
+  //   delay(50);
+  //   firstLoop = 0;
+  //   probeActive = 0;
+
+  //   goto loadfile;
+  // }
 
   // Serial.print("Slot: ");
   // Serial.println(netSlot);
@@ -503,7 +519,7 @@ goto dontshowmenu;
   case 'x':
     {
     
-    if (netSlot == NUM_SLOTS)
+    if (netSlot == NUM_SLOTS-1)
     {
       netSlot = 0;
     } else {
@@ -540,7 +556,8 @@ goto dontshowmenu;
     getNodesToConnect();
     bridgesToPaths();
     clearLEDs();
-    assignNetColors();
+    //leds.clear();
+    //assignNetColors();
     digitalWrite(RESETPIN, HIGH);
     delayMicroseconds(100);
     // Serial.print("bridgesToPaths\n\r");
@@ -762,6 +779,8 @@ goto dontshowmenu;
     {
       Serial.print("18");
     }
+    Serial.print("\n\n\r7. load slots on start    =    ");
+    Serial.print(loadFileOnStart? "on" : "off");
 
     Serial.print("\n\n\n\r");
 

Jumperless_Wokwi_Bridge_App/JumperlessWokwiBridge/Apple Silicon/Jumperless copy.app/Contents/Info.plist

@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+	<key>CFBundleDisplayName</key>
+	<string>Jumperless</string>
+	<key>CFBundleExecutable</key>
+	<string>Jumperless</string>
+	<key>CFBundleIconFile</key>
+	<string>icon.icns</string>
+	<key>CFBundleIdentifier</key>
+	<string>Jumperless</string>
+	<key>CFBundleInfoDictionaryVersion</key>
+	<string>6.0</string>
+	<key>CFBundleName</key>
+	<string>Jumperless</string>
+	<key>CFBundlePackageType</key>
+	<string>APPL</string>
+	<key>CFBundleShortVersionString</key>
+	<string>0.0.0</string>
+	<key>NSHighResolutionCapable</key>
+	<true/>
+</dict>
+</plist>

Jumperless_Wokwi_Bridge_App/JumperlessWokwiBridge/Apple Silicon/Jumperless copy.app/Contents/MacOS/Jumperless

@@ -0,0 +1,12 @@
+#!/bin/bash
+# This is the launcher for OSX, this way the app will be opened
+# when you double click it from the apps folder
+open -n -F /Applications/Jumperless.app/Contents/MacOS/Jumperless_cli
+
+
+
+#this should be called jumperlesswokwibridge in the contents folder of the app
+
+#and the real app should be renamed to jumperlesswokwibridge_cli
+
+#it's a hack to allow you to both have a .app file and actually run it in a persistent Terminal