Cool_Tools/Jumperless
1
0
Fork 0
mirror of https://github.com/Architeuthis-Flux/Jumperless.git synced 2024-11-23 23:00:57 +01:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'main' of https://github.com/Architeuthis-Flux/Jumperless

Browse Source
This commit is contained in:
Kevin Santo Cappuccio 2024-11-21 09:21:05 -08:00
commit de4b0a323c
2 changed files with 40 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
Probe_Guide.md Normal file
View File

@ -0,0 +1,36 @@
# Probe Kit Assembly Guide
![probePCB copy](https://github.com/user-attachments/assets/ac8bf8a3-5925-482b-8a0c-045cf857685b)
Square holes connect to the Probe
Round holes connect to the Button
![pobeCircuit](https://github.com/user-attachments/assets/14849a79-7de1-4cee-9ee5-20d73590c264)
Lift the middle tab and solder your favorite button facing
down so it can be pressed by pushing on the bar (pro tip:
stick something in there to keep it down while soldering)
Break off that triangular tab at the end and solder
it to the end of the wires that connect to the Jumperless.
The 2mm pitch header pins should friction fit into the
2.54mm spaced holes 18 and 19 at the top left corner.
![probePCB copy](https://github.com/user-attachments/assets/074b590f-71d9-4b72-abf1-19dede25eba1)
Strip the single wire wrap wire (you can use your fingernails)
and lace it through the holes around the needle tip, then
slide the needle under it and flood the whole pad with solder
![probePCB copylaceNeedle](https://github.com/user-attachments/assets/12e67f86-bd8d-4c0d-acf6-6764eae8489c)
Remember to bridge those pill-shaped pads with a tiny dot
of solder at the end of the rows connecting to your button.
![JumperlessProbe2](https://github.com/user-attachments/assets/ab38888e-b2ed-4f44-a5d4-00dc7dd7c433)
If pressing the button puts the Jumperless in probe mode
but doesn’t light the LED or sense rows, the Button and
Probe connections are swapped, just turn the connector around.
Or just have fun with it and do it however the hell you want!
I’m a piece of paper, not a cop.

4
README.md
View File

@ -16,6 +16,10 @@ Using a bunch of analog crosspoint switches wired together into one bigger switc
![BreaboardJump00420](https://github.com/Architeuthis-Flux/Jumperless/assets/20519442/c3ec1f73-97c5-4268-9da4-672787bc9e1a)
#### [3D Printable Stand](https://www.printables.com/model/684090-stand-for-the-jumperless-breadboard) (you can drop the model through the build plate to adjust the height)
#### [3D Printable Jumperless Trap](https://www.printables.com/model/1040448-jumperless-v1-3-case) (jk it's a carrying case, but make sure you can get it back open before you put your Jumperless in it)
Try this Wokwi project if something isn't working: https://wokwi.com/projects/389569655762010113