* mm: Migrate service in Horizon project
This PR migrate the `mm:u` service to the Horizon project, things were checked by some RE aswell, that's why some vars are renamed, the logic should be the same as before.
Tests are welcome.
* Lock _sessionList instead
* Fix comment
* Fix Session fields order
* Move shuffle handling out of the backend to a transform pass
* Handle subgroup sizes higher than 32
* Stop using the subgroup size control extension
* Make GenerateShuffleFunction static
* Shader cache version bump
* Vulkan: Periodically free regions of the staging buffer
There was an edge case where a game could submit tens of thousands of small copies over the course of over half a minute to unique fences. This could result in a large stutter when the staging buffer became full and it tried to check and free thousands of completed fences.
This became visible with some games and mirrors on Windows, as they don't submit any buffer data via the staging buffer, but may submit copies of the support buffer.
This change makes the Vulkan backend check for staging buffer completion on each command buffer submit, so it can't get backed up with 1000s of copies to check.
* Add comment
* Initial implementation of buffer mirrors
Generally slower right now, goal is to reduce render passes in games that do inline updates
Fix support buffer mirrors
Reintroduce vertex buffer mirror
Add storage buffer support
Optimisation part 1
More optimisation
Avoid useless data copies.
Remove unused cbIndex stuff
Properly set write flag for storage buffers.
Fix minor issues
Not sure why this was here.
Fix BufferRangeList
Fix some big issues
Align storage buffers rather than getting full buffer as a range
Improves mirrorability of read-only storage buffers
Increase staging buffer size, as it now contains mirrors
Fix some issues with buffers not updating
Fix buffer SetDataUnchecked offset for one of the paths when using mirrors
Fix buffer mirrors interaction with buffer textures
Fix mirror rebinding
Move GetBuffer calls on indirect draws before BeginRenderPass to avoid draws without render pass
Fix mirrors rebase
Fix rebase 2023
* Fix crash when using stale vertex buffer
Similar to `Get` with a size that's too large, just treat it as a clamp.
* Explicitly set support buffer as mirrorable
* Address feedback
* Remove unused fragment of MVK workaround
* Replace logging for staging buffer OOM
* Address format issues
* Address more format issues
* Mini cleanup
* Address more things
* Rename BufferRangeList
* Support bounding range for ClearMirrors and UploadPendingData
* Add maximum size for vertex buffer mirrors
* Enable index buffer mirrors
Enabled on all platforms for the IbStreamer.
* Feedback
* Remove mystery BufferCache change
Probably macos related?
* Fix mirrors not creating when staging buffer is empty.
* Change log level to debug
This branch changes the buffer copy fast path to notify memory tracking for all resources that aren't buffers. This fixes cases where games would copy buffer data directly into texture memory, which before would only work if the texture did not already exist. I imagine this happens when the guest driver is moving data between allocations or uploading it.
Since this only affects the fast path, cases where the source data has been modified from GPU (fast path copy destination doesn't count) will still fail to notify the texture, though I don't imagine games will do this. This should be resolved in future.
This should fix some texture issues with guest OpenGL games on switch, such as Dragon Quest Builders.
This may also be useful in future for games that move shader data around memory, if we end up using memory tracking for those.
* Move some properties out of ShaderConfig
* Stop using ShaderConfig on backends
* Replace ShaderConfig usages on Translator and passes
* Move remaining properties out of ShaderConfig and delete ShaderConfig
* Remove ResourceManager property from TranslatorContext
* Move Rewriter passes to separate transform pass files
* Fix TransformPasses.RunPass on cases where a node is removed
* Move remaining ClipDistancePrimitivesWritten and UsedFeatures updates to decode stage
* Reduce excessive parameter passing a bit by using structs more
* Remove binding parameter from ShaderProperties methods since it is redundant
* Replace decoder instruction checks with switch statement
* Put GLSL on the same plan as SPIR-V for input/output declaration
* Stop mutating TranslatorContext state when Translate is called
* Pass most of the graphics state using a struct instead of individual query methods
* Auto-format
* Auto-format
* Add backend logging interface
* Auto-format
* Remove unnecessary use of interpolated strings
* Remove more modifications of AttributeUsage after decode
* PR feedback
* gl_Layer is not supported on compute
ForceDpiAware.Windows has a side effect of forcing the application DPI to be the same as the primary monitor. This isn't good if you have multiple monitors with different DPI.
On Avalonia, I don't think there are any downsides to disabling this. When it's disabled, `ForceDpiAware.GetWindowScaleFactor` always returns 1.
* It builds
(Doesn’t run waiting on FluentAvalonia Preview 5 Release)
* Enable CompiledBindings by default
* Ignore `PointerPressedEventArgs` Init warning
* Define MIME and UTI Types
* Update `UserProfileImageSelectorView` to StorageProvider API
* PFS0 Magic
* Update `MainWindowViewModel` to StorageProvider API
* Update `SettingsUIView` to StorageProvider API
* Update `ApplicationHelper` to StorageProvider API
* Use `IsCheckChanged`
* Rename events
* Update Fluent Avalonia to Preivew 5
* More package updates
* Fix long selection bar
* return glyph value directly, instead of using a binding
* fix menu item checkboxes
* Fix build
* Update to Preview 6
Unicorn conflict
Fix remaining package oopsie
* Fix issues from merge
* Fix some warnings
* Warnings
* Squashed commit of the following:
commit 79d1c190db
Author: Mary <mary@mary.zone>
Date: Sun Apr 16 11:38:07 2023 +0200
chore: Update Silk.NET to 2.17.1 (#4686)
commit 2bc88467eb
Author: Ac_K <Acoustik666@gmail.com>
Date: Sun Apr 16 09:37:31 2023 +0000
Update README.md
commit baf8752e74
Author: Vincenzo Nizza <vincenzonizzaufficio@gmail.com>
Date: Sun Apr 16 11:19:33 2023 +0200
Ensure the updater doesn't delete hidden or system files (#4626)
* Copy desktop.ini to update directory if it exists in HomeDir
* EnumerateFilesToDelete() exclude files with "Hidden" and "System" attributes
commit d5e4378aea
Author: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Date: Sun Apr 16 09:02:06 2023 +0000
nuget: bump DynamicData from 7.13.1 to 7.13.5 (#4654)
Bumps [DynamicData](https://github.com/reactiveui/DynamicData) from 7.13.1 to 7.13.5.
- [Release notes](https://github.com/reactiveui/DynamicData/releases)
- [Changelog](https://github.com/reactivemarbles/DynamicData/blob/main/ReleaseNotes.md)
- [Commits](https://github.com/reactiveui/DynamicData/compare/7.13.1...7.13.5)
---
updated-dependencies:
- dependency-name: DynamicData
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
commit 6dbcdfea47
Author: TSRBerry <20988865+TSRBerry@users.noreply.github.com>
Date: Sun Apr 16 09:09:02 2023 +0200
Ava: Fix nca extraction window never closing & minor cleanup (#4569)
* ava: Remove unused doWhileDeferred parameters
* ava: Minimally improve swkbd dialog
It's currently impossible to get the dialog to redirect focus to the InputBox.
* ava: Fix nca extraction dialog never closing
Also contains some minor cleanup
commit c5258cf082
Author: NitroTears <73270647+NitroTears@users.noreply.github.com>
Date: Sun Apr 16 11:03:35 2023 +1000
Ability to hide file types in Game List (#4555)
* Added HiddenFileTypes to config state, and check to file enumeration
* Added hiddenfiletypes checkboxes to the UI
* Added Ava version of HiddenFileTypes
* Inverted Hide to Show with file types, minor formatting
* all variables with a reference to 'hidden' is now 'shown'
* one more variable name changed
* review feedback
* added FileTypes extension methof to get the correlating config value
* moved extension method to new folder and file in Ryujinx.Ui.Common
* added default case for ToggleFileType
* changed exception type to OutOfRangeException
commit 5c89e22bb9
Author: Daniel Shala <daniel.shala08@gmail.com>
Date: Sat Apr 15 18:11:24 2023 +0200
Added check for eventual symlink when displaying game files. (#4526)
* Added check for eventual symlink when displaying game files.
* Moved symlink check logic
* Moved symlink check logic
* Fixed prev commit
---------
Co-authored-by: Daniel Shala <danielshala00@gmail.com>
commit 11ecff2ff0
Author: Alex Barney <thealexbarney@gmail.com>
Date: Fri Apr 14 16:00:34 2023 -0700
Rename Hipc to Cmif where appropriate (#3880)
commit 4c3f09644a
Author: MutantAura <44103205+MutantAura@users.noreply.github.com>
Date: Wed Apr 12 20:18:40 2023 +0100
Move swkbd message null check into constructor (#4671)
commit e187a8870a
Author: TSRBerry <20988865+TSRBerry@users.noreply.github.com>
Date: Wed Apr 12 03:09:47 2023 +0200
HLE: Deal with empty title names properly (#4643)
* hle: Deal with empty titleNames in some languages
* gui: Fix displaying the wrong title name
* Remove unnecessary bounds check
* Fix a NRE when getting the version string
* Restore empty string logic
commit a64fee29dc
Author: riperiperi <rhy3756547@hotmail.com>
Date: Tue Apr 11 08:23:41 2023 +0100
Vulkan: add situational "Fast Flush" mode (#4667)
* Flush in the middle of long command buffers.
* Vulkan: add situational "Fast Flush" mode
The AutoFlushCounter class was added to periodically flush Vulkan command buffers throughout a frame, which reduces latency to the GPU as commands are submitted and processed much sooner. This was done by allowing command buffers to flush when framebuffer attachments changed.
However, some games have incredibly long render passes with a large number of draws, and really aggressive data access that forces GPU sync.
The Vulkan backend could potentially end up building a single command buffer for 4-5ms if a pass has enough draws, such as in BOTW. In the scenario where sync is waited on immediately after submission, this would have to wait for the completion of a much longer command buffer than usual.
The solution is to force command buffer submission periodically in a "fast flush" mode. This will end up splitting render passes, but it will only enable if sync is aggressive enough.
This should improve performance in GPU limited scenarios, or in games that aggressively wait on synchronization. In some games, it may only kick in when res scaling. It won't trigger in games like SMO where sync is not an issue.
Improves performance in Pokemon Scarlet/Violet (res scaled) and BOTW (in general).
* Add conversions in milliseconds next to flush timers.
commit 9ef94c8292
Author: riperiperi <rhy3756547@hotmail.com>
Date: Tue Apr 11 07:55:04 2023 +0100
ARMeilleure: Move TPIDR_EL0 and TPIDRRO_EL0 to NativeContext (#4661)
* ARMeilleure: Move TPIDR_EL0 and TPIDRRO_EL0 to NativeContext
Some games access these system registers several tens of thousands of times in a second from many different threads. While this isn't really crippling, it is a lot of wasted time spent in a reverse pinvoke transition.
Example games are Pokemon Scarlet/Violet and BOTW. These games have a lot of different potential bottlenecks so it's unlikely you will see a consistent improvement, but it definitely disappears from the cpu profile.
* Remove unreachable code.
* Add ulong conversion for offsets
* Nit
commit 915d6d044c
Author: riperiperi <rhy3756547@hotmail.com>
Date: Tue Apr 11 07:32:31 2023 +0100
OpenGL: Fix OBS/Overlays again by binding FB before present (#4668)
This seems to have been removed by the Post-Processing PR, but it is required for the display in OBS to be the right way up and properly scaled.
I've tested this with AA and FSR on MK8D and it seems to behave properly. Testing is welcome.
commit a4780ab33b
Author: MutantAura <44103205+MutantAura@users.noreply.github.com>
Date: Mon Apr 10 23:04:31 2023 +0100
Force activate parent window before dialog is shown (#4663)
* Fix build
Extraction dialogue not working
* Avalonia Preview 7
Needs Fluent Avalonia update still…
* Fix Render Scaling
* Update Fluent Avalonia
* Remove `pfs0` as runnable file type
* Restore Info.plist formatting
* Plist Format
* Update Avalonia.Svg.Skia
* Update theme code (TODO)
* swtich to using theme variants for light dark
* Fix crashes
* Text centering issues
* Update `TitleUpdateViewModel` to StorageProvider API
* Fixed for new PR
(Will crash on launch)
* Fixes…
* UI: Fix sections extraction (#4820)
* UI: Fix sections extraction
There is currently an issue when the update NCA doesn't contains the section we want to extract, this is fixed by adding a check.
I have fixed the inverted handler of ExeFs/Logo introduced in #4755.
Fixes#4521
* Addresses feedback
* Fix issues…
* Preview 8
* Fix fuck ups
* Fixes
* More cleanup
* Ava 11 RC
Maybe there is a god
* Update FluentAvalonia
* update svg
* Second RC (kill me)
* It builds
* Ava 11
* Remove unnecessary usings
* Fix build
* Formatting
* GAS GAS GAS!!!!
* Fix DLC Window Crash
* Linux runner try not to crash challenge (impossible)
* Add app.manifest
* Fix accidental Silk.NET.Vulkan bump
* Try fix truncation
* Linux fix popup Windows
* Fix cutoff text on windows
* Status bar styling fixes
* Volume Toggle Split Button Fixes
* Fix load bar color
* Fix shortcuts
* Best we're gonna get
* Fix spacing
Co-authored-by: Exhigh <exhigh01@gmail.com>
* Formatting
* Fix Profile Dropdown
* Fix Window Startup Position
* Format Fixes
* Fix stupid mistake
* Fix accidental change
* Scaling Handler (peri pls make sure is working)
* Remove Locale Reflection Binding Use + Unsued Usings
* Fix formatting
Code styling
Ughhhh
Fix interface
Make TimeZoneConverter internal
* Remove bell workaround (no longer needed)
* Disable accent menu
* Update to Ava 11.0.2
* Peri suggestions
* Formatting
* Cleanup a bunch of jank
* Dependency update
* Berry fixes and suggestions
* Final suggestions
* Rename assemblyIdentity to Ryujinx.Emulator.Avalonia
---------
Co-authored-by: Emmanuel Hansen <emmausssss@gmail.com>
Co-authored-by: Ac_K <Acoustik666@gmail.com>
Co-authored-by: Exhigh <exhigh01@gmail.com>
Co-authored-by: TSR Berry <20988865+TSRBerry@users.noreply.github.com>
* GPU: Don't sync/bind index buffer when it's not in use
Sometimes draws don't use an index buffer. It's not necessary to check or upload data for the current index buffer binding as it won't be used.
This fixes Pokemon: Legends Arceus updating a stale index buffer for every draw during its TFB pass, which was all non-indexed draws.
This probably didn't cost much on normal PCs, but it had a large impact on MacOS, which the macos1 release build avoided by mirroring index buffers (the PR currently does not). Needs buffer mirrors still for the rest of the performance.
There are additional cases where index buffers are bound or checked with non-indexed draws on the backend, but this one was straightforward to fix and has the largest impact. Testing is welcome to ensure nothing weird broke.
* Fix case with _rebind
* Fix incorrect fragment origin when YNegate is enabled
* Shader cache version bump
* Do not update support buffer if shader does not read gl_FragCoord
* Pass unscaled viewport size to the support buffer
* Add workflow to perform automated checks for PRs
* Downgrade Microsoft.CodeAnalysis to 4.4.0
This is a workaround to fix issues with dotnet-format.
See:
- https://github.com/dotnet/format/issues/1805
- https://github.com/dotnet/format/issues/1800
* Adjust editorconfig to be more compatible with Ryujinx code-style
* Adjust .editorconfig line endings to match .gitattributes
* Disable 'prefer switch expression' rule
* Remove naming styles
These are the default rules, so we don't need to override them.
* Silence IDE0060 in .editorconfig
* Slightly adjust .editorconfig
* Add lost workflow changes
* Move .editorconfig comment to the top
* .editorconfig: private static readonly fields should be _lowerCamelCase
* .editorconfig: Remove alignment for declarations as well
* editorconfig: Add rule for local constants
* Disable CA1822 for HLE services
* Disable CA1822 for ViewModels
Bindings won't work with static members, but this issue is silently ignored.
* Run dotnet format for the whole solution
* Check result code of SDL_GetDisplayBounds
* Fix dotnet format style issues
* Add missing trailing commas
* Update Microsoft.CodeAnalysis.CSharp to 4.6.0
Skipping 4.5.0 since it breaks dotnet format
* Restore old default naming rules for dotnet format
* Add naming rule exception for CPU tests
* checks: Include all files before excluding paths
* Fix dotnet format issues
* Check dotnet format version
* checks: Run dotnet format with severity info again
* checks: Disable naming style rules until they won't crash the process anymore
* Remove unread private member
* checks: Attempt to run analyzers 3 times before giving up
* checks: Enable naming style rules again with the new retry logic
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Silence dotnet format IDE0052 warnings
* Address or silence dotnet format IDE1006 warnings
* Address dotnet format CA1816 warnings
* Address or silence dotnet format CA2208 warnings
* Address or silence dotnet format CA1806 and a few CA1854 warnings
* Address dotnet format CA2211 warnings
* Address dotnet format CA1822 warnings
* Address or silence dotnet format CA1069 warnings
* Make dotnet format succeed in style mode
* Address or silence dotnet format CA2211 warnings
* Address review comments
* Address dotnet format CA2208 warnings properly
* Make ProcessResult readonly
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Add previously silenced warnings back
I have no clue how these disappeared
* Revert formatting changes for while and for-loops
* Format if-blocks correctly
* Run dotnet format style after rebase
* Run dotnet format whitespace after rebase
* Run dotnet format style after rebase
* Run dotnet format analyzers after rebase
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Disable 'prefer switch expression' rule
* Add comments to disabled warnings
* Fix a few disabled warnings
* Fix naming rule violation, Convert shader properties to auto-property and convert values to const
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Start working on disabled warnings
* Fix and silence a few dotnet-format warnings again
* Run dotnet format after rebase
* Use using declaration instead of block syntax
* Address IDE0251 warnings
* Address a few disabled IDE0060 warnings
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* Fix naming rule violations
* Fix typo
* Add trailing commas, use targeted new and use array initializer
* Fix build issues
* Fix remaining build issues
* Remove SuppressMessage for CA1069 where possible
* Address dotnet format issues
* Address formatting issues
Co-authored-by: Ac_K <acoustik666@gmail.com>
* Add GetHashCode implementation for RenderingSurfaceInfo
* Explicitly silence CA1822 for every affected method in Syscall
* Address formatting issues in Demangler.cs
* Address review feedback
Co-authored-by: Ac_K <acoustik666@gmail.com>
* Revert marking service methods as static
* Next dotnet format pass
* Address review feedback
---------
Co-authored-by: Ac_K <acoustik666@gmail.com>
* Fix some validation errors and silence the annoying pipeline barrier error
* Remove bogus decref/incref on index buffer state
* Make unsafe blit opt-in rather than opt-out
* Remove Vulkan debugger messages blacklist
* Adjust GetImageUsage to not set the storage bit for multisample textures if not supported
* Move support buffer update out of the backends
* Fix render scale init and remove redundant state from SupportBufferUpdater
* Stop passing texture scale to the backends
* XML docs for SupportBufferUpdater
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Silence dotnet format IDE0052 warnings
* Silence dotnet format IDE0059 warnings
* Address or silence dotnet format IDE1006 warnings
* Address dotnet format CA1816 warnings
* Address dotnet format CA1822 warnings
* Address or silence dotnet format CA1069 warnings
* Make dotnet format succeed in style mode
* Address dotnet format CA1401 warnings
* Address remaining dotnet format analyzer warnings
* Address review comments
* dotnet-format fixes after rebase
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Format if-blocks correctly
* Another rebase, another dotnet format run
* Run dotnet format whitespace after rebase
* Run dotnet format style after rebase
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Add comments to disabled warnings
* Remove a few unused parameters
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Start working on disabled warnings
* Fix and silence a few dotnet-format warnings again
* Address IDE0260 warnings
* Address a few disabled IDE0060 warnings
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* dotnet format pass with new editorconfig
* Fix naming style issues
* Apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Revert one suggestion
* Second dotnet format pass and fix build issues
* Final pass of dotnet format
* Add trailing commas
* Fix formatting issues
* Keep unnecessary assignment in IconColorPicker.cs
* Use using declarations and extend resource lifetimes
* Fix rebase issues
* Adjust comment spacing
* Fix typo
* Fix naming issues
* Apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Revert unintentional change
* Remove unused file
* Remove static keyword from ViewModels
Binding of static members doesn't work and is silently ignored.
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
Nintendo controllers notoriously have the A/B and X/Y buttons swapped, compared to the standard.
In order to combat this, when setting the default controller layout, Ryujinx checks whether the controller name contains "Nintendo", and swaps the mapping accordingly.
However, the reason the mapping is inverted in the first place is because SDL has `SDL_HINT_GAMECONTROLLER_USE_BUTTON_LABELS` set to 1 by default. By setting it to 0, the mapping will be based on the buttons' position instead.
So, by doing it (and removing the `isNintendoStyle` variable), we get the following advantages:
- The mapping will be the same on all controllers, removing the need to adjust custom mappings depending on what controller is used
- Users who already set `SDL_HINT_GAMECONTROLLER_USE_BUTTON_LABELS` to 0 globally for other games/applications (like me) won't have a wrong default mapping
- Checking whether the controller name contains "Nintendo" is ugly
Disadvantages:
- Breaks the controller configuration for existing users who are using a Nintendo controller
* Stop identifying shader textures with handle and cbuf, use binding instead
* Remove now unused code
* Consider image operations as having accurate type information too
I don't know why that was not the case before
* Fix missing unscale on InsertCoordNormalization, stop calling SetUsageFlagsForTextureQuery when not needed
* Shader cache version bump
* Change get texture methods to return descriptors created from ResourceManager state
This is required to ensure that reserved textures and images will not be bound as a guest texture/image
* Fix BindlessElimination.SetHandle inserting coords at the wrong place
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Silence dotnet format IDE0052 warnings
* Address dotnet format CA1816 warnings
* Address or silence dotnet format CA1069 warnings
* Address or silence dotnet format CA2211 warnings
* Address remaining dotnet format analyzer warnings
* Address review comments
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Format if-blocks correctly
* Run dotnet format whitespace after rebase
* Run dotnet format style after rebase
* Another rebase, another dotnet format run
* Run dotnet format style after rebase
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Disable 'prefer switch expression' rule
* Add comments to disabled warnings
* Remove a few unused parameters
* Replace MmeShadowScratch with Array256<uint>
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Start working on disabled warnings
* Fix and silence a few dotnet-format warnings again
* Run dotnet format after rebase
* Address IDE0251 warnings
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First pass of dotnet format
* Add unsafe dotnet format changes
* Fix typos
* Add trailing commas
* Disable formatting for FormatTable
* Address review feedback
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Silence dotnet format IDE0052 warnings
* Address dotnet format CA1816 warnings
* Address or silence dotnet format CA2208 warnings
* Address or silence dotnet format CA2211 warnings
* Address review comments
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Format if-blocks correctly
* Run dotnet format whitespace after rebase
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Add comments to disabled warnings
* Remove a few unused parameters
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Start working on disabled warnings
* Fix and silence a few dotnet-format warnings again
* Address IDE0251 warnings
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Fix naming rule violations, remove redundant code and fix build issues
* Apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Add trailing commas
* Apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Address review feedback
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Address dotnet format CA1816 warnings
* Address or silence dotnet format CA2208 warnings
* Address or silence dotnet format CA1806 and a few CA1854 warnings
* Address dotnet format CA1822 warnings
* Make dotnet format succeed in style mode
* Address dotnet format CA2208 warnings properly
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Format if-blocks correctly
* Another rebase, another dotnet format run
* Run dotnet format whitespace after rebase
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* Fix build issues
* Apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Second dotnet format pass
* Update src/Ryujinx/Modules/Updater/Updater.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Add trailing commas and improve formatting
* Fix formatting and naming issues
* Rename nvStutterWorkaround to nvidiaStutterWorkaround
* Use using declarations and extend resource lifetimes
* Fix GTK issues
* Add formatting for generated files
* Add trailing commas
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Silence dotnet format IDE0052 warnings
* Address dotnet format CA1822 warnings
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Revert formatting changes for while and for-loops
* Run dotnet format whitespace after rebase
* Run dotnet format style after rebase
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Add comments to disabled warnings
* Remove a few unused parameters
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Address IDE0251 warnings
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* Add trailing commas and fix formatting issues
* Convert if-else chain to switch block
* Address review feedback
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Silence dotnet format IDE0059 warnings
* Address dotnet format CA1816 warnings
* Fix new dotnet-format issues after rebase
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Format if-blocks correctly
* Another rebase, another dotnet format run
* Run dotnet format whitespace after rebase
* Run dotnet format style after rebase
* Run dotnet format analyzers after rebase
* Run dotnet format style after rebase
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Disable 'prefer switch expression' rule
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Run dotnet format after rebase
* Address IDE0251 warnings
* Address a few disabled IDE0060 warnings
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* Fix naming rule violations
* Remove redundant code
* Rename generics
* Address review feedback
* Remove SetOrigin
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Silence dotnet format IDE0052 warnings
* Silence dotnet format IDE0059 warnings
* Address or silence dotnet format IDE1006 warnings
* Address dotnet format CA1816 warnings
* Address most dotnet format whitespace warnings
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Add comments to disabled warnings
* Remove a few unused parameters
* Adjust namespaces
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Start working on disabled warnings
* Fix and silence a few dotnet-format warnings again
* Address a few disabled IDE0060 warnings
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Address review feedback
* Remove redundant unsafe modifiers
* Fix build issues
* Add GC.SuppressFinalize() call
* Add trailing commas and fix naming rule violations
* Remove unused members and assignments
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Fix new dotnet-format issues after rebase
* Address review comments
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Format if-blocks correctly
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* cpu tests: Disable CA2211 for CodeBaseAddress and DataBaseAddress
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* First dotnet format pass
* Fix naming rule violations
* Remove naming rule violation exceptions
* Fix comment style
* Use targeted new
* Remove redundant code
* Remove comment alignment
* Remove naming rule exceptions
* Add trailing commas
* Use nameof expression
* Reformat to add remaining trailing commas
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Silence dotnet format IDE0060 warnings
* Address dotnet format CA1401 warnings
* dotnet-format fixes after rebase
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Another rebase, another dotnet format run
* Run dotnet format style after rebase
* Add comments to disabled warnings
* Remove a few unused parameters
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Address IDE0251 warnings
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Small optimizations
* Remove alignment
* Apply formatting
* Fix build issues
* Final pass for dotnet format
* Add trailing commas
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Add trailing commas
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0052 warnings
* Address dotnet format CA1816 warnings
* Address or silence dotnet format CA1069 warnings
* Address remaining dotnet format analyzer warnings
* Address review comments
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Revert formatting changes for while and for-loops
* Another rebase, another dotnet format run
* Run dotnet format whitespace after rebase
* Run dotnet format style after rebase
* Run dotnet format analyzers after rebase
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Disable 'prefer switch expression' rule
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Start working on disabled warnings
* Address IDE0251 warnings
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* Address review feedback
* Add trailing commas
* Remove SuppressMessage for IDE0066
* Make explicit Equals implementation implicit
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Address or silence dotnet format CA1806 and a few CA1854 warnings
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* Add trailing commas
* Fix naming and formatting issues
* dotnet format style --severity info
Some changes were manually reverted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0052 warnings
* Address or silence dotnet format IDE1006 warnings
* Address or silence dotnet format CA1069 warnings
* Address review comments
* Address most dotnet format whitespace warnings
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Address IDE0251 warnings
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Rename Operand.cs to IOperand.cs
* Update src/Spv.Generator/Module.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Remove NotNullWhen attribute and use conditional access to avoid NRE
* Fix duplicated enum values
* Remove unread member
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* dotnet format style --severity info
Some changes were manually reverted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Silence dotnet format IDE0059 warnings
* Address or silence dotnet format CA2208 warnings
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Format if-blocks correctly
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Address IDE0251 warnings
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* Apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Address review feedback
* Update src/Ryujinx.Graphics.Texture/Astc/AstcDecoder.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Silence dotnet format IDE0059 warnings
* Address or silence dotnet format IDE1006 warnings
* Address dotnet format CA1816 warnings
* Address or silence dotnet format CA2211 warnings
* Silence CA1806 and CA1834 issues
* Fix formatting for switch expressions
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Revert formatting changes for while and for-loops
* Format if-blocks correctly
* Run dotnet format whitespace after rebase
* Run dotnet format style after rebase
* Run dotnet format analyzers after rebase
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Add comments to disabled warnings
* Remove a few unused parameters
* Replace MmeShadowScratch with Array256<uint>
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Run dotnet format after rebase
* Address IDE0251 warnings
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* Second dotnet format pass
* Fix build issues
* Fix StructArrayHelpers.cs
* Apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Fix return statements
* Fix naming rule violations
* Update src/Ryujinx.Common/Utilities/StreamUtils.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Add trailing commas
* Address review feedback
* Address review feedback
* Rename remaining type parameters to TKey and TValue
* Fix manual formatting for logging levels
* Fix spacing before comments
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Silence dotnet format IDE0059 warnings
* Address or silence dotnet format IDE1006 warnings
* Address dotnet format CA1816 warnings
* Address or silence dotnet format CA1069 warnings
* Address remaining dotnet format analyzer warnings
* Address review comments
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Format if-blocks correctly
* Another rebase, another dotnet format run
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Address review feedback
* Assign Decommit to ReplacePlaceholder
* Run final dotnet format pass
* Organize imports again
* Add trailing commas
* Add missing newline
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Address dotnet format CA1816 warnings
* Address or silence dotnet format CA1806 and a few CA1854 warnings
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Remove redundant code, convert to auto-properties and fix naming rule violations
* Remove bogus change
* Address review feedback
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Address or silence dotnet format IDE1006 warnings
* Fix IDE0090 after rebase
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Format if-blocks correctly
* Another rebase, another dotnet format run
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Start working on disabled warnings
* Address a few disabled IDE0060 warnings
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* Address review feedback
* cpu: Implement VCVT (between floating-point and fixed-point) instruction
Rebase, fix and superseed of https://github.com/Ryujinx/Ryujinx/pull/2915
(Since I only have little CPU knowledge, I hope I have done everything good)
* Update Ptc.cs
* Fix wrong cast
* Rename tests
* Addresses feedback
Co-Authored-By: gdkchan <5624669+gdkchan@users.noreply.github.com>
* Remove extra empty line
---------
Co-authored-by: gdkchan <5624669+gdkchan@users.noreply.github.com>
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Address or silence dotnet format IDE1006 warnings
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Address IDE0251 warnings
* Address a few disabled IDE0060 warnings
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Fix empty lines before return
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Add trailing commas, remove redundant code and remove static modifier from Surface.HighBd
* Fix naming rule violations
* Fix naming rule violations
* Fix empty line before return
* Fix comment style
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Remove comment alignment
* Address review feedback
* Separate comments by 2 spaces and fix other formatting issues
* Make HighBd an auto-property
* Replace if-chain with if-else-chain
* Fix new naming rule violations
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* dotnet format style --severity info
Some changes were manually reverted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Silence dotnet format IDE0052 warnings
* Silence dotnet format IDE0059 warnings
* Address or silence dotnet format CA1069 warnings
* Address or silence dotnet format CA2211 warnings
* Address review comments
* Fix formatting for switch expressions
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Format if-blocks correctly
* Run dotnet format whitespace after rebase
* Run dotnet format style after rebase
* Run dotnet format whitespace after rebase
* Run dotnet format style after rebase
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Disable 'prefer switch expression' rule
* Add comments to disabled warnings
* Fix naming rule violation, Convert shader properties to auto-property and convert values to const
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Run dotnet format after rebase
* Address IDE0251 warnings
* Address a few disabled IDE0060 warnings
* Silence IDE0060 in .editorconfig
* Run dotnet format after rebase
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* Fix naming rule violations
* Add trailing commas
* Remove unused members and most unnecessary value assignments
* Remove more unnecessary assignments
* Remove NRE suppressor
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Run dotnet format pass
* Remove left-over files and adjust namespaces
* Fix alignment
* dotnet format style --severity info
Some changes were manually reverted.
* Address most dotnet format whitespace warnings
* Add comments to disabled warnings
* dotnet format whitespace after rebase
* dotnet format style --severity info
Some changes were manually reverted.
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* dotnet format whitespace after rebase
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Silence dotnet format IDE0052 warnings
* Address or silence dotnet format IDE1006 warnings
* Address or silence dotnet format CA2208 warnings
* Address dotnet format CA1822 warnings
* Address or silence dotnet format CA1069 warnings
* Silence CA1806 and CA1834 issues
* Address dotnet format CA1401 warnings
* Fix new dotnet-format issues after rebase
* Address review comments
* Address dotnet format CA2208 warnings properly
* Fix formatting for switch expressions
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Add previously silenced warnings back
I have no clue how these disappeared
* Revert formatting changes for OpCodeTable.cs
* Enable formatting for a few cases again
* Format if-blocks correctly
* Enable formatting for a few more cases again
* Fix inline comment alignment
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Disable 'prefer switch expression' rule
* Add comments to disabled warnings
* Remove a few unused parameters
* Adjust namespaces
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Start working on disabled warnings
* Fix and silence a few dotnet-format warnings again
* Address IDE0251 warnings
* Address a few disabled IDE0060 warnings
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* Remove unnecessary formatting exclusion
* Add unsafe dotnet format changes
* Change visibility of JitSupportDarwin to internal
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0052 warnings
* Address dotnet format CA1816 warnings
* Address or silence dotnet format CA1806 and a few CA1854 warnings
* Address most dotnet format whitespace warnings
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Add trailing commas, log errors instead of throwing and remove redundant code
* dotnet format style --severity info
Some changes were manually reverted.
* Address dotnet format CA1816 warnings
* Address or silence dotnet format CA1806 and a few CA1854 warnings
* Address most dotnet format whitespace warnings
* dotnet format whitespace after rebase
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Address most dotnet format whitespace warnings
* dotnet format whitespace after rebase
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Address dotnet format CA1816 warnings
* Address most dotnet format whitespace warnings
* Run dotnet format style after rebase
* Run dotnet format analyzers after rebase
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Update src/Ryujinx.Audio.Backends.SDL2/SDL2HardwareDeviceDriver.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* dotnet format style --severity info
Some changes were manually reverted.
* Restore a few unused methods and variables
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Add previously silenced warnings back
I have no clue how these disappeared
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Address IDE0251 warnings
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* dotnet format style --severity info
Some changes were manually reverted.
* Address or silence dotnet format CA1806 and a few CA1854 warnings
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Address IDE0251 warnings
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Address dotnet format CA1822 warnings
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Final dotnet format pass and fix naming rule violations
* Apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Remove unused constant
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* dotnet format style --severity info
Some changes were manually reverted.
* Restore a few unused methods and variables
* Address review comments
* Address most dotnet format whitespace warnings
* Add comments to disabled warnings
* Address IDE0251 warnings
* dotnet format whitespace after rebase
* Remove SuppressMessage attribute for removed rule
* dotnet format style --severity info
Some changes were manually reverted.
* Restore a few unused methods and variables
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Final dotnet format pass and fix naming rule violations
* dotnet format style --severity info
Some changes were manually reverted.
* Address most dotnet format whitespace warnings
* Address IDE0251 warnings
* dotnet format whitespace after rebase
* dotnet format style --severity info
Some changes were manually reverted.
* Address dotnet format CA1816 warnings
* Address dotnet format CA1401 warnings
* Address most dotnet format whitespace warnings
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Address review feedback
* dotnet format style --severity info
Some changes were manually reverted.
* Restore a few unused methods and variables
* Address dotnet format CA1816 warnings
* Address most dotnet format whitespace warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Fix regression introduced by 1.1733 on Intel iGPUs
* Should have actually figured the variable, oops.
* maybe something goes wrong here? honestly lost
* Shader cache bump
* misc: Implement address space size workarounds
This adds code to support userland with less than 39 bits of address
space available by testing reserving multiple sizes and reducing
guess address space when needed.
This is required for ARM64 support when the kernel is
configured to use 63..39 bits for kernel space.(meaning only 38 bits is available to userland)
* Address comments
* Fix 32 bits address space support and address more comments
* Implement Load/Store Local/Shared and Atomic shared using new instructions
* Remove now unused code
* Fix base offset register overwrite
* Fix missing storage buffer set index when generating GLSL for Vulkan
* Shader cache version bump
* Remove more unused code
* Some PR feedback
