diff --git a/konami/io/GEC02/pwb-aa-bootleg.md b/konami/io/GEC02/pwb-aa-bootleg.md
new file mode 100644
index 0000000..395d18e
--- /dev/null
+++ b/konami/io/GEC02/pwb-aa-bootleg.md
@@ -0,0 +1,13 @@
+# GEC02-PWB(A)A - bootleg
+
+* A hardware bootleg of the [GEC02-PWB(A)A PCB](pwb-aa.md)
+* Runs original base microcontroller and FPGA firmwares
+* Key differences
+  * Red dip-switches
+  * Molex 4-pin power connector
+* Important note regarding power connector
+  * If power connector is mounted correctly (on the top PCB layer), +5V and +12V are swapped (!!!). You need adapter cable that swaps the two pins in order to power it correclty by any standard PC power supply
+  * If the connector is mounted on the bottom of the PCB ("turned around"), the pins for +5V and +12V are correctly mapped to the molex connector
+* Images
+  * [PCB top](https://github.com/Shizmob/arcade-docs-media/blob/main/konami/GEC02/PWB(A)A%20bootleg/top.jpeg)
+  * [PCB bottom](https://github.com/Shizmob/arcade-docs-media/blob/main/konami/GEC02/PWB(A)A%20bootleg/bottom.jpeg)
\ No newline at end of file