Cool_Tools/arcade-docs
1
1
Fork 0
mirror of https://github.com/Shizmob/arcade-docs.git synced 2024-11-27 16:10:49 +01:00
Code Releases Activity

Update fusion wiring, lights mappings and breakout cable

Browse Source 
Fill in lights mappings. Yes, I tested these on my own cabinet
because I had to build a breakout cable to connect everything
to essentially any other hardware than the stock fusion PCB.

Breakout cable instructions and mappings also included as a
bonus, since this is likely the use-case one might be looking
for those pinouts.
This commit is contained in:
voidderef 2022-07-11 02:56:27 +02:00
parent 5ab2aa9868
commit f8adaa067f
1 changed files with 100 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

120
konami/io/e33-jamma-wiring.md
View File

@ -99,7 +99,7 @@ The follow hardware is connected on this connector:
4: NC 4: NC
5: Jumper cable (brown) -> Connects to bottom pin 6 5: Jumper cable (brown) -> Connects to bottom pin 6
6: NC 6: NC
7: EXT I/O serial (purple) 7: EXT I/O serial TX (purple)
8: NC 8: NC
9: NC 9: NC
10: NC 10: NC
@ -116,10 +116,10 @@ The follow hardware is connected on this connector:
21: NC 21: NC
22: NC 22: NC
23: NC 23: NC
24: Lights I/O (yellow-grey) 24: Lights P2 cabinet button lights (yellow-grey)
25: Lights I/O (light blue) 25: Lights P1 halo up (light blue)
26: Lights I/O (grey) 26: Lights P2 halo down (grey)
27: GND (black) 27: GND for +5V (black)
28: NC 28: NC
``` ```
@ -132,8 +132,8 @@ The follow hardware is connected on this connector:
4: NC 4: NC
5: NC 5: NC
6: Jumper cable (brown) -> Connects to top pin 5 6: Jumper cable (brown) -> Connects to top pin 5
7: EXT I/O serial (grey) 7: EXT I/O serial RX (grey)
8: EXT I/O serial (black) 8: EXT I/O serial GND (black)
9: NC 9: NC
10: NC 10: NC
11: NC 11: NC
@ -148,10 +148,10 @@ The follow hardware is connected on this connector:
20: NC 20: NC
21: NC 21: NC
22: NC 22: NC
23: Lights I/O (purple-grey) 23: Lights P1 cabinet button lights (purple-grey)
24: Lights I/O (green) 24: Lights P2 halo up (green)
25: Lights I/O (purple) 25: Lights P1 halo down (purple)
26: Lights I/O (black) 26: Lights GND (black)
27: NC 27: NC
28: NC 28: NC
``` ```
@ -168,14 +168,14 @@ Pintout order: looking at the front of the connector, left to right:
|-----------------| |-----------------|
1: Earth (yellow-green) 1: Earth (yellow-green)
2: ??? (grey) 2: P2 halo down (grey)
3: ??? (purple) 3: P1 halo down (purple)
4: ??? (light blue) 4: P1 halo up (light blue)
5: ??? (green) 5: P2 halo up (green)
6: ??? (yellow-grey) 6: P2 cabinet button lights (yellow-grey)
7: ??? (purple-grey) 7: P1 cabinet button lights (purple-grey)
8: NC 8: NC
9: ??? (black) 9: GND (black)
``` ```
## EXT I/O serial connector ## EXT I/O serial connector
@ -190,6 +190,86 @@ Pintout order: looking at the front of the connector, left to right:
|-----| |-----|
1: GND (black) 1: GND (black)
2: ??? (purple) 2: TX (purple)
3: ??? (grey) 3: RX (grey)
```
## Adapter secondary JAMMA connector to "classic" DDR wiring
With the secondary JAMMA connector being propriatary to the Dancing
Stage Fusion cabinet, you need a "breakout" adapter that splices
the JAMMA connector into the following separate connectors:
* `EHR-5` connector to COM1 on the PCB for the EXTIO
* +5V supply, likely via a 2-pin connector that works with your
cabinet's internal power infrastructure
* `XMP-11V` connector to PORT1 on the PCB for lights
Note: Bass lights, P1/P2 pad lights as well as sensor multiplexing
is handled by the EXTIO board.
### COM1 breakout
Pinout for the `EHR-5` connector breaking out of the JAMMA connector.
Pintout order for `EHR-5`: looking at the front of the connector,
left to right:
```text
| |
|---------|
|1 2 3 4 5|
|---------|
1: GND (black)
2: NC
3: NC
4: RX (grey)
5: TX (purple)
```
Mapping for breakout cable:
```text
JAMMA top: 7 -> EHR-5: 5
JAMMA bottom: 7 -> EHR-5: 4
JAMMA bottom: 8 -> EHR-5: 1
```
### Lights connector breakout
Pinout for the `XMP-11V` connector breaking out of the JAMMA connector.
Pintout order for `XMP-11V`: looking at the front of the connector,
left to right:
```text
| |--| |
|-----------------------|
|1 2 3 4 5 6 7 8 9 10 11|
|-----------------------|
1: NC
2: P1 halo up
3: P1 halo down
4: P2 halo up
5: P2 halo down
6: GND
7: NC
8: NC
9: P2 cabinet button lights
10: P1 cabinet button lights
11: GND
```
Mapping for breakout cable:
```text
JAMMA top: 24 -> XMP-11V: 9
JAMMA top: 25 -> XMP-11V: 2
JAMMA top: 26 -> XMP-11V: 5
JAMMA bottom: 23 -> XMP-11V: 10
JAMMA bottom: 24 -> XMP-11V: 4
JAMMA bottom: 25 -> XMP-11V: 3
JAMMA bottom: 26 -> XMP-11V: 6 + 11
``` ```