From 73bcba1376c7af7276ca2ac17aa3dd7d0d3e3bb5 Mon Sep 17 00:00:00 2001
From: phuzion <398094+phuzion@users.noreply.github.com>
Date: Tue, 27 Jun 2023 14:40:16 -0400
Subject: [PATCH] Content!

---
 konami/gfdm/xg-cab.md | 44 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/konami/gfdm/xg-cab.md b/konami/gfdm/xg-cab.md
index e69de29..d055833 100644
--- a/konami/gfdm/xg-cab.md
+++ b/konami/gfdm/xg-cab.md
@@ -0,0 +1,44 @@
+# Gitadora XG Cabinets
+Known as "XG cabinets" or "XG Full Stage", this model of arcade cabinet was introduced by Konami in 2010. The monitor runs at 1280x720 at 60fps (confirm?). This is one of the most common types of cabinet running e-amusement in the United States, primarily found at Round1.
+
+Inside the cabinet, you will find a BemaniPC, specific models have yet to be determined.
+
+Because most models of this cabinet do not enable the extra DVI ports on the motherboard for video mirroring, the recommended method to get an extra video feed for capture is to use a powered DVI splitter with EDID mirroring.
+
+Additionally, you will need a stereo 3.5mm splitter to capture audio.
+
+## Items Needed
+* Powered DVI splitter [link](https://www.amazon.com/gp/product/B084LK5S5Q)
+* 1x stereo 3.5mm splitter [example](https://www.amazon.com/dp/B06XF4J6RT)
+* 3.5mm cable, at least 10' in length [example](https://www.amazon.com/dp/B004G3ZTU8/)
+* 2 DVI cables (One DVI cable should be 3-6' in length, the other should be at least 10' in length)
+* A capture card capable of capturing DVI signals, and any necessary adapters. One known good card is the [StarTech USB3HDCAP](https://www.amazon.com/StarTech-com-USB3HDCAP-Video-Capture-Device/dp/B00PC5HUA6).
+
+## Install Process
+### Video
+1. Turn off power to the machine. The safest way to do so is to turn off the power switch located inside the coin door. This will ensure that the machine remains grounded while working, reducing the risk of ESD damage to the machine.
+2. Open the rear service panel of the machine. This panel is typically secured with a single tubular lock located at the top center of the panel, or screws located in the top corners.
+3. Disconnect the DVI cable from the port on the motherboard of the BemaniPC, and connect it to Output 1 on the DVI splitter.
+4. Connect the shorter DVI cable to the same port on the BemaniPC, and the Input port of the DVI splitter.
+5. Connect the long DVI cable to Output 2 on the DVI splitter.
+6. Connect the power adapter barrel conector to the DVI splitter, and route the adapter to a power source.
+
+### Audio
+1. With the machine still shut down, unplug the 3.5mm audio cable from the motherboard of the computer, from the green 3.5mm port and plug it into one of the outputs of the 3.5mm splitter.
+2. Connect the 3.5mm audio splitter to the green 3.5mm port
+3. Connect the new 3.5mm audio cable to the second port of the audio splitter
+
+### Finishing Up
+1. Carefully route cables inside the machine, attempting to avoid running parallel to any wires that are brown, green or blue, as these are AC voltage lines, and may cause interference to audio or video signals.
+2. Place the video splitter in a safe location. If this will be permanently installed, it may be wise to mount the splitter with two-sided-tape to an open panel, leaving the ports accessible for service. Take care not to pinch or excessively bend any cables.
+3. Route the audio and video cables out the service slot on the bottom left corner of the rear of the machine, where the power and network cables come out.
+
+## Streaming
+### Booting
+When booting the cabinet for the first time after installing the splitter, you will want to ensure that the audio and video signals are working as expected. You may do this either by allowing the cabinet to boot to the game software and playing a test credit, or by using the audio and video test functions in the service menu.
+
+### Capture Card
+Once you have verified that the audio and video are working properly, you should test your capture card. Boot the machine, wait for the game to load, and then connect your streaming equipment.
+
+### Disconnecting
+After your streaming event has finished, you will want to clean up the area of the cabinet. If you have permission from the cabinet owner, you may wish to leave the streaming equipment installed. If not, remove the equipment and restore the hardware to its original configuration.
\ No newline at end of file