add ONGEKI bright MEMORY guide

docs/games/mu3/controllers.md

@@ -0,0 +1,111 @@
+!!! danger "Please make sure you downloaded your data from an appropriate source.<br>This guide is unable to troubleshoot any problems related to bad or poorly managed data."
+
+---
+
+!!! tip ""
+
+    segatools, by default, only accepts keyboard input and XInput Controllers. 
+    However, it can be configured with IO DLLs to add support for other controllers.
+
+    The controller you plan on using should also be provided with these IO DLLs. If unsure,
+    check the support section for your controller, or contact the vendor directly. Alternate
+    options for the most common controllers are listed below.
+
+    These IO DLLs should be copied to your game's `App\bin\` folder and referenced in
+    `segatools.ini` under the `[mu3io]` section.
+    
+!!! tip ""
+
+    If you have a single DLL, uncomment the `path=` line by removing the leading semicolon (`;`),
+    then add your DLL's file name after the `=`:
+
+    ```ini hl_lines="5"
+    [mu3io]
+    ; To use a custom O.N.G.E.K.I. IO DLL enter its path here.
+    ; Leave empty if you want to use Segatools built-in keyboard/gamepad input.
+    ;(1)!
+    path=controller.dll
+    ```
+
+    1. Note that there is no leading semicolon.
+
+---
+
+### Keyboard and Mouse
+
+!!! tip ""
+
+    Keyboard and Mouse is the default input method.
+
+    To enable mouse lever emulation ensure that the `mouse` option is set to `1` in the `[io4]` 
+    section of your `segatools.ini`:
+
+    ```ini hl_lines="3"
+    [io4]
+    ; Set "1" to enable mouse lever emulation, "0" to use XInput
+    mouse=1
+    ```
+    
+    The default layout use `ASD` for the left 3 buttons, and `JKL` for the right 3 buttons.
+    `Mouse Left/Right Click` are used for the left and right bumper buttons.
+
+    If you wish to change the default keybinds, an explanation on how to set these is included
+    above the `[io4]` section in your `segatools.ini`.
+
+---
+
+### XInput Controller
+!!! tip ""
+
+    XInput controllers are supported by segatools. To enable XInput, ensure that the `mouse` option
+    is set to `0` in the `[io4]` section of your `segatools.ini`:
+
+    ```ini hl_lines="3"
+    [io4]
+    ; Set "1" to enable mouse lever emulation, "0" to use XInput
+    mouse=0
+    ```
+
+    If you wish to change the default keybinds, an explanation on how to set these is included
+    above the `[io4]` section in your `segatools.ini`.
+---
+
+### Mageki
+
+!!! tip ""
+
+    Mageki allows you to use a mobile device as a ONGEKI controller. It replicates the layout
+    of an arcade ONGEKI controller on your mobile device.
+
+    Mageki supports both Android and iOS devices. For installation instructions, please refer to
+    the [English User Manual on the Mageki GitHub Repository](https://github.com/Sanheiii/Mageki/wiki/Mageki-User-Manual).
+
+!!! warning "Configuring ongeki-io and MU3-input.dll"
+
+	When moving the zipped contents of `MU3Input`, move all folders **EXCEPT** the `segatools.ini` file into your `App\package` folder.
+    Modify the `[mu3io]` and `[aimeio]` sections of your existing `segatools.ini` file to look like the following:
+
+    ```ini hl_lines="2 5"
+    [mu3io]
+    path = MU3Input.dll
+
+    [aimeio]
+    path64 = MU3Input.dll
+    ```
+    If these sections do not exist, add them to the end of your `segatools.ini` file.
+
+!!! info "IOConfig doesn't launch for me/This application requires the Windows App Runtime"
+
+    Download and extract the contents of the [Windows App Runtime Version 1.5 Redustributable](https://aka.ms/windowsappsdk/1.5/1.5.240802000/Microsoft.WindowsAppRuntime.Redist.1.5.zip)
+    In the `WindowsAppSDK-Installer-x64` folder run `WindowsAppRuntimeInstall-x64.exe`
+
+    If IOConfig still fails to launch, try using the [SelfContained version of ongeki-io](https://github.com/Sanheiii/ongeki-io/releases)
+
+
+### Arcade hardware and other controllers
+
+!!! tip ""
+
+    If you're interested in using a cabinet slider and air sensors, or possibly even
+    making your own controller, the [Cons&Stuff website](https://consandstuff.github.io/)
+    and Discord community is a great place to start!

docs/games/mu3/troubleshooting.md

@@ -0,0 +1,108 @@
+!!! danger "Please make sure you downloaded your data from an appropriate source.<br>This guide is unable to troubleshoot any problems related to bad or poorly managed data."
+
+---
+
+### My game crashes on launch/stuck on "Starting System Process"
+
+!!! tip ""
+
+    Could be due to **many** things, the most common of which are:
+    
+    - `amdaemon` crashing in the background. Make sure that the `config_*.json` files
+    have valid syntax, your ICF files are correct, and the OpenSSL fix is applied on Intel Core 10th Gen CPUs and newer.
+    
+??? info "Capturing logs from `amdaemon` for troubleshooting"
+
+    To assist with troubleshooting, a script can be used to capture logs from `amdaemon`. Create a file named
+    `amdaemontest.bat` in `App\bin`, then paste the code block below into the file.
+
+    ```batch
+    @echo off
+    cls
+    echo Attempting to run AM Daemon ...
+    echo Window should close after 30 seconds
+    echo Log will be generated at amdaemontest.txt
+    call :sub >amdaemontest.txt
+    exit /b
+
+    :sub
+    set OPENSSL_ia32cap=:~0x20000000
+    pushd %~dp0
+    start /b "AM Daemon" /min inject -d -k mu3hook.dll amdaemon.exe -f -c config_common.json config_server.json 
+    ping 127.0.0.1 -n 31 > nul && taskkill /F /im amdaemon.exe
+    ```
+
+    Double-click it to run. The script should run for 30 seconds, and you will get a file
+    named `amdaemontest.txt` in `App\bin`, which you can send to help people troubleshoot your issue.
+
+---
+### My game is stuck on a black screen at launch!
+!!! tip ""
+
+    This could also be due to **many** things, the most common of which are:
+    
+    - You have one or more incorrect/broken DLL(s) in `App\package\mu3_Data\Managed`
+    
+        This is likely to be `Assembly-CSharp.dll`, `Assembly-CSharp-firstpass.dll`, and/or `AMDaemon.NET.dll`.
+        You can try replacing the DLLs or re-downloading data from elsewhere.
+
+
+### My game is running too slow/fast or the notes are out of sync!
+
+!!! tip ""
+
+    The game could be running under or over its required refresh rate.
+    
+    - Make sure V-Sync isn't disabled in your graphics settings (called "Vertical sync"
+    in NVIDIA Control Panel and "Wait for Vertical Refresh" in AMD Control Panel.)
+    - Limit `mu3.exe` to run at 60 FPS using a tool like [RivaTuner](https://www.guru3d.com/download/rtss-rivatuner-statistics-server-download).
+
+    It could also be that your computer's performance isn't good enough to keep
+    a steady framerate.
+
+---
+
+### My lever controls aren't working!
+!!! tip ""
+
+    You may need to calibrate your lever.
+
+    From the `TEST MENU` select **レバー設定** (`LEVER SETTINGS`) and then move the lever left to
+    right ensuring that the game detects the full range of motion.
+
+    Then save by selecting **終了** (`EXIT`) and then **保存する** (`SAVE`).
+
+---
+
+### My game is stuttering
+
+!!! tip ""
+
+    For NVIDIA users, create an override for `mu3.exe` in NVIDIA Control Panel
+    and change "Power management mode" to "**Prefer maximum performance**".
+
+---
+
+### My game crashes when I tab out of fullscreen!
+
+!!! tip ""
+
+    As the game is intended to run on arcade hardware, it doesn't like being minimized.
+    
+    One workaround for this is to use DXVK. Download the latest version from [releases](https://github.com/doitsujin/dxvk/releases/latest).
+    This will be a `dxvk-x.y.z.tar.gz` file, which you can open using [7zip](https://www.7-zip.org/).
+    Navigate to the `x32` folder, and copy the `d3d9.dll` file to your game's `App\bin` folder, agreeing
+    to overwrite when asked.
+
+    You should now be able to tab out of fullscreen without crashing the game.
+
+!!! warning
+
+    The game will not ignore inputs when out of focus.
+    
+    This means any controller inputs will still be accepted, so try not to lean onto
+    your slider whilst tabbed out!
+
+    This also means that you can accidentally enter the service menu by hitting your
+    `Test` key even if the game is minimised. If you were in the middle of a credit,
+    **your scores will be lost.**

docs/games/ongekibrightmemory/controllers.md

@@ -0,0 +1,5 @@
+# Controllers (ONGEKI bright MEMORY)
+<div style="text-align: center;">
+    <img src="/img/ongeki/sddt/brightmemory.png" width="50%">
+</div>
+--8<-- "docs/games/mu3/controllers.md"

docs/games/ongekibrightmemory/setup.md

@@ -0,0 +1,360 @@
+# Game Setup (ONGEKI bright MEMORY)
+<div style="text-align: center;">
+    <img src="/img/ongeki/sddt/brightmemory.png" width="50%">
+</div>
+
+!!! danger "Please make sure you downloaded your data from an appropriate source.<br>This guide is unable to troubleshoot any problems related to bad or poorly managed data."
+
+!!! danger "If you're coming from a previous version of ONGEKI"
+
+    You'll want to create a new folder for the game and start from scratch.
+    ONGEKI **DOES NOT** like being extracted over old data!
+
+---
+
+### Preparing data
+
+!!! danger "There are currently issues with running game data in the `E:\` or `Y:\` drive.<br>Please extract the data into other drives."
+
+!!! tip ""
+
+	After downloading and extracting your data, we need to make sure your files
+    aren't set to `Read-only`.
+
+	- Right click the folder containing your data, then click on `Properties`.
+	- In the `General` tab go down to `Attributes`, untick `Read-only` and click `Apply`.
+	- A popup will appear, select `Apply changes to this folder, subfolder and files`
+    and press `OK`.
+	- Finally, click `OK` again to exit out of properties.
+
+	You should end up with a file structure as follows.
+
+    <img width="500" src="/img/ongeki/sddt/setup/0_ongekidata.png">
+
+    Create another empty folder named `AppData` next to them. It should now look like below.
+
+    <img width="500" src="/img/ongeki/sddt/setup/0_ongekidata_withappdata.png"> 
+
+    The `App` folder should have a file structure as follows.
+
+    <img width="500" src="/img/ongeki/sddt/setup/1_ongekiapp.png">
+
+??? warning "If your data doesn't look like this"
+
+    If your data looks like the third image:
+
+    - Create an `App` folder and move all files and folders from the image inside of it.
+    - Create empty folders named `amfs`, `Option` and `AppData` next to the `App` folder.
+
+    If extra files are present next to your folders, such as executables, scripts, etc..
+    **remove them. This also means your data was tampered with and we strongly recommend
+    getting new data from somewhere else.**
+
+#### Updating the base game
+
+!!! tip ""
+
+    Extract your patch's files to your existing data in a way that matches its
+    file structure. Agree to overwrite files if necessary.
+
+#### Installing option data
+
+!!! tip ""
+
+    ONGEKI content updates are distributed through option folders instead of patching
+    the base game. They are named `A???`, with each `?` being a number. Custom options
+    distributed by the community might use letters instead, to distinguish them from
+    official ones.
+
+    Extract any options you've downloaded into the `Option` folder. You should end up with
+    a file structure as follows. **Do not be worried if you have fewer or more option folders.**
+
+    In some cases, your data may have options in `App\package\option`. If so, move
+    all contents inside to the `Option` folder where `App` and `AppData` are and delete the `App\package\option` folder.
+
+    <img width="500" src="/img/ongeki/sddt/setup/2_ongekioption.png">
+
+
+#### Installing ICFs
+
+!!! tip ""
+
+    Install Configuration Files (ICFs) tell the game what version it is.
+    **Without this your game cannot go online!**
+
+    If your `amfs` folder already has a file named `ICF1`, skip this step.
+
+    In some cases, your data may have a folder containing ICFs in `App\package\amfs`.
+    If so, move all contents inside to the `amfs` folder where `App` and `AppData`, 
+    delete the `App\package\amfs` folder, and skip this step.
+
+    Otherwise, obtain copies of `ICF1` for your game version and place it in
+    the `amfs` folder. If it is named something else, rename it to exactly
+    `ICF1` **without any file extensions.**
+
+
+
+
+!!! info "Showing file extensions"
+
+    By default, file extensions on Windows are hidden. Enable them by navigating to
+    the `View` tab in File Explorer and select `File name extensions`.
+    
+
+#### Installing unprotected executables
+
+!!! tip ""
+
+    ONGEKI executables are protected and will not run on a regular computer.
+
+    Obtained unprotected (also called "unpacked" or "decrypted" by the community)
+    copies of `mu3.exe` and `amdaemon.exe` for your game version. If these weren't
+    provided with your data, join the [Discord](https://discord.gg/cZRUmEPK78)
+    for assistance.
+
+    Copy `mu3.exe` and `amdaemon.exe` to the `bin` folder of your game data. Agree
+    to overwrite when asked.
+
+---
+
+### Installing segatools
+
+!!! tip ""
+
+    - Head over to [segatools releases](https://gitea.tendokyu.moe/Dniel97/segatools/releases)
+    and download `segatools.zip`. **Do not download the source code.**
+    - Extracting the archive should give you a few more zip files. Find **`mu3.zip`**
+    and extract it to the `App\bin` folder in your game data.
+
+    You should now have a few more files inside the folder, as highlighted:
+
+    <img width="500" src="/img/ongeki/sddt/setup/3_ongeki_segatools_installed.png">
+
+---
+
+### Configuring segatools
+
+!!! tip ""
+
+    Since there is no graphical configuration tool for segatools, you will have to edit the
+    configuration file by hand. It is found in `App\bin\segatools.ini`.
+    
+    It is recommended that you follow along using a text editor with syntax highlighting such as [Notepad++](https://notepad-plus-plus.org/).
+
+    Each following sub-section will correspond to a section in `segatools.ini`. If any
+    section is not mentioned, you can skip them.
+
+!!! warning
+
+    If a key already exists in the section, delete everything after `=` and replace it with your
+    setting. Do not add another key.
+
+    ```ini
+    [system]
+    dipsw2=1
+    dipsw2=1 ; WRONG!
+    ```
+
+#### `[vfs]`
+
+!!! tip ""
+
+    If you've been matching the file structure as described in the [Preparing data](#preparing-data)
+    section, you can fill in this section with the values below:
+
+    ```ini
+    [vfs]
+    amfs=../../amfs
+    option=../../Option
+    appdata=../../AppData
+    ```
+
+#### `[gfx]`
+
+!!! tip ""
+
+    - Set `windowed` to `0` to run in fullscreen mode and `1` to run in windowed mode.
+    - If you have multiple monitors and you're running in fullscreen mode (`windowed=0`),
+    set `monitor` to the index of the monitor you want to run the game on.
+
+??? info "Getting the monitor index"
+
+    Navigate to Windows display settings. Each monitor should be assigned a number.
+    The monitor index is that number minus one. For example, monitor 2 means monitor index 1.
+
+---
+
+### Connecting to a network
+
+!!! danger "Please choose one of the two solutions, not both!"
+
+??? tip "Remote (Online Network)"
+
+    Head to the `[dns]` section inside `segatools.ini`. Set `default` to the address
+    provided by your network. **Do not add `http://` or `https://` to the address!**
+
+    ```ini
+    [dns]
+    default=network.example
+    ```
+
+    Then, head to the `[keychip]` section and add & set `id` to the keychip ID provided by your network:
+
+    ```ini
+    [keychip]
+    subnet=192.168.139.0
+    id=A69E-XXXXXXXXXXX
+    ```
+
+    Finally, you need a card number. Create a file named `aime.txt` inside `App\bin\DEVICE` and type in
+    your 20-digit access code if you already have one, or make one up if you don't. If you're making one
+    up, the access code **MUST NOT** start with a 3.
+
+    <img src="/img/ongeki/sddt/setup/4_access_code.png">
+
+??? warning "Local (ARTEMiS/AquaDX)"
+
+    Both of these options require non-trivial setup. Refer to the official guides for [ARTEMiS](https://gitea.tendokyu.moe/Hay1tsme/artemis/src/branch/develop/docs/INSTALL_WINDOWS.md)
+    and [AquaDX](https://github.com/hykilpikonna/AquaDX?tab=readme-ov-file#usage-v1-developmental-preview)
+    to set up a local server.
+
+---
+
+### Pre-launch requirements
+
+!!! info "These steps are required, otherwise your game won't run."
+
+#### VCRedist & DirectX
+
+!!! tip ""	
+
+	- Download and install the latest [VCRedist](https://github.com/abbodi1406/vcredist/releases/latest) (`VisualCppRedist_AIO_x86_x64.exe`)
+	- Download and install the [DirectX End-User Runtimes](https://www.microsoft.com/en-us/download/details.aspx?id=8109)
+
+#### Audio
+
+!!! tip ""
+
+    - Right-click on the volume setting in your taskbar and select `Sounds`.
+    - Navigate to the `Playback` tab, right click on your default audio device, and click on `Properties`.
+    - Go to the `Advanced` tab.
+	- Check both boxes under `Exclusive Mode`.
+	- Open the `Default Format` dropdown.
+    - Pick either `16 bit, 48000Hz (DVD Quality)` or `24 bit, 48000Hz (Studio Quality)`, click `Apply`, then `OK`.
+
+    <img src="/img/ongeki/sddt/setup/5_audio.png">
+
+#### Fixing OpenSSL on Intel 10th Gen and newer CPUs
+
+!!! tip ""
+
+    If you have an Intel 10th Gen CPU or newer, right click `App\bin\start.bat`, select `Edit`, and add the
+    highlighted line to the top of the file.
+
+    ```batch hl_lines="2"
+    @echo off
+    set OPENSSL_ia32cap=:~0x20000000
+
+    pushd %~dp0
+    ...
+    ```
+
+---
+
+### First launch
+
+!!! danger "If you have any issues running the game, refer to the [Troubleshooting](../ongekibrightmemory/troubleshooting.md) page."
+
+!!! tip
+
+    Without an English patch, the service menu will be in Japanese. If you don't know Japanese, [Google Lens](https://lens.google/)
+    is a handy tool for navigating this menu.
+
+#### GAME ASSIGNMENTS
+
+!!! tip ""
+
+    If you've followed all instructions correctly, you're now finally ready to launch the game!
+
+    Start the game by running `App\package\start.bat`. Let the game load until you reach a screen with the message below.
+
+<img src="/img/ongeki/sddt/setup/4_ongeki_groupcheck.png">
+
+!!! tip ""
+
+    Press your `Test` button (default `F1`) to enter the service menu. Use the `Service` button
+    (default `F2`) to navigate the menu, and `Test` button to select an option.
+
+    Navigate to **ゲーム設定** (`GAME ASSIGNMENTS`, the 5th option).
+
+<img src="/img/ongeki/sddt/setup/servicemenu/1_gamesettings.png">
+
+!!! tip ""
+
+    Select **グループ内基準機設定** (`SET STANDARD IN GROUP`, the second option)
+    and toggle this setting to **基準機** (`STANDARD`).
+
+<img src="/img/ongeki/sddt/setup/servicemenu/2_reference.png">
+
+!!! tip ""
+
+    Select **終了** (`EXIT`, the last option) to exit to the main service menu.
+
+#### CLOSE SETTING
+
+!!! tip ""
+
+    Navigate to **閉店設定** (`CLOSE SETTING`, the 10th option).
+
+<img src="/img/ongeki/sddt/setup/servicemenu/3_closesetting.png">
+
+!!! tip ""
+
+    Navigate to **時** (`HOUR`, the 2nd option) and use the `Service` button
+    to toggle the setting until it says **全時刻** (`ALL TIME`).
+
+<img src="/img/ongeki/sddt/setup/servicemenu/4_alltime.png">
+
+!!! tip ""
+
+    Select **終了** (`EXIT`, the last option) to exit to the main service menu, then select **終了**
+    (also the last option) in the main menu to exit the service menu.
+
+!!! tip ""
+
+    You're all done! The game should load up properly now.
+
+    You can add coins using the `Coin` key (default `F3`) and card in by holding the `Enter` key.
+
+---
+
+### Custom Mods
+
+!!! tip ""
+
+    !!! danger "Please use BepInEx to load all mods including MelonLoader and MonoMods"
+
+    Mods have historically been hardcoded into the unprotected `Assembly-CSharp.dll` which the user can 
+    enable/disable with the `mu3.ini` configuration. The modern approach is to use 
+    BepInEx to load custom mods without hardmodding the Assembly-CSharp file.
+
+    To enable BepInEx, download the [BepInEx stable release](https://github.com/BepInEx/BepInEx/releases/latest), 
+    extract the BepInEx folder to the `App/package` folder, and modify `segatools.ini` with the following:
+
+    ```ini
+    [unity]
+    enable=1
+    targetAssembly=BepInEx\core\BepInEx.Preloader.dll
+    ```
+
+    - BepInEx: place mods in `BepInEx/Plugins`
+    - Melonloader: use [BepInEx.MelonLoader.Loader](https://github.com/BepInEx/BepInEx.MelonLoader.Loader/releases/latest) UnityMono-BepInEx5. Place mods in `MLLoader/Mods`
+    - MonoMods: use [BepInEx.MonoMod.Loader](https://github.com/BepInEx/BepInEx.MonoMod.Loader/releases/latest). Place mods in `BepInEx/monomod`
+
+### Controllers and Troubleshooting
+
+!!! info "Input methods and controllers are covered in the [Controllers](../mu3/controllers.md) page."
+
+!!! warning "Have any other issues?"
+
+	Check out the [Troubleshooting](../mu3/troubleshooting.md) and [Error Codes](../../errorcodes/sega.md) pages.

docs/games/ongekibrightmemory/troubleshooting.md

@@ -0,0 +1,6 @@
+# Troubleshooting (ONGEKI bright MEMORY)
+<div style="text-align: center;">
+    <img src="/img/ongeki/sddt/brightmemory.png" width="50%">
+</div>
+
+--8<-- "docs/games/mu3/troubleshooting.md"

mkdocs.yml

@@ -146,6 +146,11 @@ nav:
           - "Game Setup": "games/maimaidx/buddies/setup.md"
           - "Controllers": "games/maimaidx/buddies/controllers.md"
           - "Troubleshooting": "games/maimaidx/buddies/troubleshooting.md"
+      - "ONGEKI":
+        - "bright MEMORY":
+          - "Game Setup": "games/ongekibrightmemory/setup.md"
+          - "Controllers": "games/ongekibrightmemory/controllers.md"
+          - "Troubleshooting": "games/ongekibrightmemory/troubleshooting.md"
     - NAMCO:
       - "Taiko no Tatsujin: Nijiiro":
         - "Game Setup": "games/taikonijiiro/setup.md"
@@ -170,6 +175,7 @@ nav:
 
 not_in_nav: |
   games/chusan
+  games/mu3
 
 theme:
   name: material