citra-mk7/src/core/arm/interpreter/arminit.cpp

/*  arminit.c -- ARMulator initialization:  ARM6 Instruction Emulator.
    Copyright (C) 1994 Advanced RISC Machines Ltd.

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */

//#include <unistd.h>

#include "core/arm/skyeye_common/armdefs.h"
#include "core/arm/skyeye_common/armemu.h"

/***************************************************************************\
*                 Definitions for the emulator architecture                 *
\***************************************************************************/

void ARMul_EmulateInit (void);
ARMul_State *ARMul_NewState (ARMul_State * state);
void ARMul_Reset (ARMul_State * state);
ARMword ARMul_DoCycle (ARMul_State * state);
unsigned ARMul_DoCoPro (ARMul_State * state);
ARMword ARMul_DoProg (ARMul_State * state);
ARMword ARMul_DoInstr (ARMul_State * state);
void ARMul_Abort (ARMul_State * state, ARMword address);

unsigned ARMul_MultTable[32] = {
    1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9,
    10, 10, 11, 11, 12, 12, 13, 13, 14, 14, 15, 15, 16, 16, 16
};
ARMword ARMul_ImmedTable[4096];	/* immediate DP LHS values */
char ARMul_BitList[256];	/* number of bits in a byte table */

//chy 2006-02-22 add test debugmode
extern int debugmode;
extern int remote_interrupt( void );


void arm_dyncom_Abort(ARMul_State * state, ARMword vector)
{
    ARMul_Abort(state, vector);
}


/* ahe-ykl : the following code to initialize user mode
   code is architecture dependent and probably model dependant. */

/*#include "skyeye_arch.h"
#include "skyeye_pref.h"
#include "skyeye_exec_info.h"
#include "bank_defs.h"*/
//#include "armcpu.h"
//#include "skyeye_callback.h"

/*
		ARM_CPU_State* cpu = get_current_cpu();
		arm_core_t* core = &cpu->core[0];

		uint32_t sp = info->initial_sp;

		core->Cpsr = 0x10; // User mode
// FIXME: may need to add thumb
core->Reg[13] = sp;
core->Reg[10] = info->start_data;
core->Reg[0] = 0;
bus_read(32, sp + 4, &(core->Reg[1]));
bus_read(32, sp + 8, &(core->Reg[2]));
*/
/***************************************************************************\
*         Call this routine once to set up the emulator's tables.           *
\***************************************************************************/

void
ARMul_EmulateInit (void)
{
    unsigned int i, j;

    for (i = 0; i < 4096; i++) {	/* the values of 12 bit dp rhs's */
        ARMul_ImmedTable[i] = ROTATER (i & 0xffL, (i >> 7L) & 0x1eL);
    }

    for (i = 0; i < 256; ARMul_BitList[i++] = 0);	/* how many bits in LSM */
    for (j = 1; j < 256; j <<= 1)
        for (i = 0; i < 256; i++)
            if ((i & j) > 0)
                ARMul_BitList[i]++;

    for (i = 0; i < 256; i++)
        ARMul_BitList[i] *= 4;	/* you always need 4 times these values */

}

/***************************************************************************\
*            Returns a new instantiation of the ARMulator's state           *
\***************************************************************************/

ARMul_State *
ARMul_NewState (ARMul_State *state)
{
    unsigned i, j;

    memset (state, 0, sizeof (ARMul_State));

    state->Emulate = RUN;
    for (i = 0; i < 16; i++) {
        state->Reg[i] = 0;
        for (j = 0; j < 7; j++)
            state->RegBank[j][i] = 0;
    }
    for (i = 0; i < 7; i++)
        state->Spsr[i] = 0;
    state->Mode = 0;

    state->CallDebug = FALSE;
    state->Debug = FALSE;
    state->VectorCatch = 0;
    state->Aborted = FALSE;
    state->Reseted = FALSE;
    state->Inted = 3;
    state->LastInted = 3;

    state->CommandLine = NULL;

    state->EventSet = 0;
    state->Now = 0;
    state->EventPtr =
        (struct EventNode **) malloc ((unsigned) EVENTLISTSIZE *
                                      sizeof (struct EventNode *));
#if DIFF_STATE
    state->state_log = fopen("/data/state.log", "w");
    printf("create pc log file.\n");
#endif
    if (state->EventPtr == NULL) {
        printf ("SKYEYE: ARMul_NewState malloc state->EventPtr error\n");
        exit(-1);
        //skyeye_exit (-1);
    }
    for (i = 0; i < EVENTLISTSIZE; i++)
        *(state->EventPtr + i) = NULL;
#if SAVE_LOG
    state->state_log = fopen("/tmp/state.log", "w");
    printf("create pc log file.\n");
#else
#if DIFF_LOG
    state->state_log = fopen("/tmp/state.log", "r");
    printf("loaded pc log file.\n");
#endif
#endif

#ifdef ARM61
    state->prog32Sig = LOW;
    state->data32Sig = LOW;
#else
    state->prog32Sig = HIGH;
    state->data32Sig = HIGH;
#endif

    state->lateabtSig = HIGH;
    state->bigendSig = LOW;

    //chy:2003-08-19
    state->LastTime = 0;
    state->CP14R0_CCD = -1;

    /* ahe-ykl: common function for interpret and dyncom */
    /*sky_pref_t *pref = get_skyeye_pref();
    if (pref->user_mode_sim)
    	register_callback(arm_user_mode_init, Bootmach_callback);
        */

    memset(&state->exclusive_tag_array[0], 0xFF, sizeof(state->exclusive_tag_array[0]) * 128);
    state->exclusive_access_state = 0;
    //state->cpu = (cpu_config_t *) malloc (sizeof (cpu_config_t));
    //state->mem_bank = (mem_config_t *) malloc (sizeof (mem_config_t));
    return (state);
}

/***************************************************************************\
*       Call this routine to set ARMulator to model a certain processor     *
\***************************************************************************/

void
ARMul_SelectProcessor (ARMul_State * state, unsigned properties)
{
    if (properties & ARM_Fix26_Prop) {
        state->prog32Sig = LOW;
        state->data32Sig = LOW;
    } else {
        state->prog32Sig = HIGH;
        state->data32Sig = HIGH;
    }
    /* 2004-05-09 chy
    below line sould be in skyeye_mach_XXX.c 's XXX_mach_init function
    */
    // state->lateabtSig = HIGH;


    state->is_v4 =
        (properties & (ARM_v4_Prop | ARM_v5_Prop)) ? HIGH : LOW;
    state->is_v5 = (properties & ARM_v5_Prop) ? HIGH : LOW;
    state->is_v5e = (properties & ARM_v5e_Prop) ? HIGH : LOW;
    state->is_XScale = (properties & ARM_XScale_Prop) ? HIGH : LOW;
    state->is_iWMMXt = (properties & ARM_iWMMXt_Prop) ? HIGH : LOW;
    /* state->is_v6 = LOW */;
    /* jeff.du 2010-08-05 */
    state->is_v6 = (properties & ARM_v6_Prop) ? HIGH : LOW;
    state->is_ep9312 = (properties & ARM_ep9312_Prop) ? HIGH : LOW;
    //chy 2005-09-19
    state->is_pxa27x = (properties & ARM_PXA27X_Prop) ? HIGH : LOW;

    /* shenoubang 2012-3-11 */
    state->is_v7 = (properties & ARM_v7_Prop) ? HIGH : LOW;

    /* Only initialse the coprocessor support once we
       know what kind of chip we are dealing with.  */
    //ARMul_CoProInit (state);

}

/***************************************************************************\
* Call this routine to set up the initial machine state (or perform a RESET *
\***************************************************************************/

void
ARMul_Reset (ARMul_State * state)
{
    //fprintf(stderr,"armul_reset 0: state->  Cpsr 0x%x, Mode %d\n",state->Cpsr,state->Mode);
    state->NextInstr = 0;
    if (state->prog32Sig) {
        state->Reg[15] = 0;
        state->Cpsr = INTBITS | SVC32MODE;
        state->Mode = SVC32MODE;
    } else {
        state->Reg[15] = R15INTBITS | SVC26MODE;
        state->Cpsr = INTBITS | SVC26MODE;
        state->Mode = SVC26MODE;
    }
    //fprintf(stderr,"armul_reset 1: state->  Cpsr 0x%x, Mode %d\n",state->Cpsr,state->Mode);
    //ARMul_CPSRAltered (state);
    state->Bank = SVCBANK;
    FLUSHPIPE;

    state->EndCondition = 0;
    state->ErrorCode = 0;

    //fprintf(stderr,"armul_reset 2: state->  Cpsr 0x%x, Mode %d\n",state->Cpsr,state->Mode);
    state->NresetSig = HIGH;
    state->NfiqSig = HIGH;
    state->NirqSig = HIGH;
    state->NtransSig = (state->Mode & 3) ? HIGH : LOW;
    state->abortSig = LOW;
    state->AbortAddr = 1;

    state->NumInstrs = 0;
    state->NumNcycles = 0;
    state->NumScycles = 0;
    state->NumIcycles = 0;
    state->NumCcycles = 0;
    state->NumFcycles = 0;

    //fprintf(stderr,"armul_reset 3: state->  Cpsr 0x%x, Mode %d\n",state->Cpsr,state->Mode);
    //mmu_reset (state);
    //fprintf(stderr,"armul_reset 4: state->  Cpsr 0x%x, Mode %d\n",state->Cpsr,state->Mode);

    //mem_reset (state); /* move to memory/ram.c */

    //fprintf(stderr,"armul_reset 5: state->  Cpsr 0x%x, Mode %d\n",state->Cpsr,state->Mode);
    /*remove later. walimis 03.7.17 */
    //io_reset(state);
    //lcd_disable(state);

    /*ywc 2005-04-07 move from ARMul_NewState , because skyeye_config.no_dbct will
     *be configured in skyeye_option_init and it is called after ARMul_NewState*/
    state->tea_break_ok = 0;
    state->tea_break_addr = 0;
    state->tea_pc = 0;
#ifdef DBCT
    if (!skyeye_config.no_dbct) {
        //teawater add for arm2x86 2005.02.14-------------------------------------------
        if (arm2x86_init (state)) {
            printf ("SKYEYE: arm2x86_init error\n");
            //skyeye_exit (-1);
        }
        //AJ2D--------------------------------------------------------------------------
    }
#endif
}


/***************************************************************************\
* Emulate the execution of an entire program.  Start the correct emulator   *
* (Emulate26 for a 26 bit ARM and Emulate32 for a 32 bit ARM), return the   *
* address of the last instruction that is executed.                         *
\***************************************************************************/

//teawater add DBCT_TEST_SPEED 2005.10.04---------------------------------------
#ifdef DBCT_TEST_SPEED
static ARMul_State	*dbct_test_speed_state = NULL;
static void
dbct_test_speed_sig(int signo)
{
    printf("\n0x%llx %llu\n", dbct_test_speed_state->instr_count, dbct_test_speed_state->instr_count);
    exit(0);
    //skyeye_exit(0);
}
#endif	//DBCT_TEST_SPEED
//AJ2D--------------------------------------------------------------------------

ARMword
ARMul_DoProg (ARMul_State * state)
{
    ARMword pc = 0;

    /*
     * 2007-01-24 removed the term-io functions by Anthony Lee,
     * moved to "device/uart/skyeye_uart_stdio.c".
     */

//teawater add DBCT_TEST_SPEED 2005.10.04---------------------------------------
#ifdef DBCT_TEST_SPEED
    {
        if (!dbct_test_speed_state) {
            //init timer
            struct itimerval	value;
            struct sigaction	act;

            dbct_test_speed_state = state;
            state->instr_count = 0;
            act.sa_handler = dbct_test_speed_sig;
            act.sa_flags = SA_RESTART;
            //cygwin don't support ITIMER_VIRTUAL or ITIMER_PROF
#ifndef __CYGWIN__
            if (sigaction(SIGVTALRM, &act, NULL) == -1) {
#else
            if (sigaction(SIGALRM, &act, NULL) == -1) {
#endif	//__CYGWIN__
                fprintf(stderr, "init timer error.\n");
                exit(-1);
                //skyeye_exit(-1);
            }
            if (skyeye_config.dbct_test_speed_sec) {
                value.it_value.tv_sec = skyeye_config.dbct_test_speed_sec;
            } else {
                value.it_value.tv_sec = DBCT_TEST_SPEED_SEC;
            }
            printf("dbct_test_speed_sec = %ld\n", value.it_value.tv_sec);
            value.it_value.tv_usec = 0;
            value.it_interval.tv_sec = 0;
            value.it_interval.tv_usec = 0;
#ifndef __CYGWIN__
            if (setitimer(ITIMER_VIRTUAL, &value, NULL) == -1) {
#else
            if (setitimer(ITIMER_REAL, &value, NULL) == -1) {
#endif	//__CYGWIN__
                fprintf(stderr, "init timer error.\n");
                //skyeye_exit(-1);
            }
        }
    }
#endif	//DBCT_TEST_SPEED
//AJ2D--------------------------------------------------------------------------
    state->Emulate = RUN;
    while (state->Emulate != STOP) {
        state->Emulate = RUN;

        /*ywc 2005-03-31 */
        if (state->prog32Sig && ARMul_MODE32BIT) {
#ifdef DBCT
            if (skyeye_config.no_dbct) {
                pc = ARMul_Emulate32 (state);
            } else {
                pc = ARMul_Emulate32_dbct (state);
            }
#else
            pc = ARMul_Emulate32 (state);
#endif
        }

        else {
            //pc = ARMul_Emulate26 (state);
        }
        //chy 2006-02-22, should test debugmode first
        //chy 2006-04-14, put below codes in ARMul_Emulate
#if 0
        if(debugmode)
            if(remote_interrupt())
                state->Emulate = STOP;
#endif
    }

    /*
     * 2007-01-24 removed the term-io functions by Anthony Lee,
     * moved to "device/uart/skyeye_uart_stdio.c".
     */

    return (pc);
}

/***************************************************************************\
* Emulate the execution of one instruction.  Start the correct emulator     *
* (Emulate26 for a 26 bit ARM and Emulate32 for a 32 bit ARM), return the   *
* address of the instruction that is executed.                              *
\***************************************************************************/

ARMword
ARMul_DoInstr (ARMul_State * state)
{
    ARMword pc = 0;

    state->Emulate = ONCE;

    /*ywc 2005-03-31 */
    if (state->prog32Sig && ARMul_MODE32BIT) {
#ifdef DBCT
        if (skyeye_config.no_dbct) {
            pc = ARMul_Emulate32 (state);
        } else {
//teawater add compile switch for DBCT GDB RSP function 2005.10.21--------------
#ifndef DBCT_GDBRSP
            printf("DBCT GDBRSP function switch is off.\n");
            printf("To use this function, open \"#define DBCT_GDBRSP\" in arch/arm/common/armdefs.h & recompile skyeye.\n");
            skyeye_exit(-1);
#endif	//DBCT_GDBRSP
//AJ2D--------------------------------------------------------------------------
            pc = ARMul_Emulate32_dbct (state);
        }
#else
        pc = ARMul_Emulate32 (state);
#endif
    }

    //else
    //pc = ARMul_Emulate26 (state);

    return (pc);
}

/***************************************************************************\
* This routine causes an Abort to occur, including selecting the correct    *
* mode, register bank, and the saving of registers.  Call with the          *
* appropriate vector's memory address (0,4,8 ....)                          *
\***************************************************************************/

void
ARMul_Abort (ARMul_State * state, ARMword vector)
{
    ARMword temp;
    int isize = INSN_SIZE;
    int esize = (TFLAG ? 0 : 4);
    int e2size = (TFLAG ? -4 : 0);

    state->Aborted = FALSE;

    if (state->prog32Sig)
        if (ARMul_MODE26BIT)
            temp = R15PC;
        else
            temp = state->Reg[15];
    else
        temp = R15PC | ECC | ER15INT | EMODE;

    switch (vector) {
    case ARMul_ResetV:	/* RESET */
        SETABORT (INTBITS, state->prog32Sig ? SVC32MODE : SVC26MODE,
                  0);
        break;
    case ARMul_UndefinedInstrV:	/* Undefined Instruction */
        SETABORT (IBIT, state->prog32Sig ? UNDEF32MODE : SVC26MODE,
                  isize);
        break;
    case ARMul_SWIV:	/* Software Interrupt */
        SETABORT (IBIT, state->prog32Sig ? SVC32MODE : SVC26MODE,
                  isize);
        break;
    case ARMul_PrefetchAbortV:	/* Prefetch Abort */
        state->AbortAddr = 1;
        SETABORT (IBIT, state->prog32Sig ? ABORT32MODE : SVC26MODE,
                  esize);
        break;
    case ARMul_DataAbortV:	/* Data Abort */
        SETABORT (IBIT, state->prog32Sig ? ABORT32MODE : SVC26MODE,
                  e2size);
        break;
    case ARMul_AddrExceptnV:	/* Address Exception */
        SETABORT (IBIT, SVC26MODE, isize);
        break;
    case ARMul_IRQV:	/* IRQ */
        //chy 2003-09-02 the if sentence seems no use
#if 0
        if (!state->is_XScale || !state->CPRead[13] (state, 0, &temp)
                || (temp & ARMul_CP13_R0_IRQ))
#endif
            SETABORT (IBIT,
                      state->prog32Sig ? IRQ32MODE : IRQ26MODE,
                      esize);
        break;
    case ARMul_FIQV:	/* FIQ */
        //chy 2003-09-02 the if sentence seems no use
#if 0
        if (!state->is_XScale || !state->CPRead[13] (state, 0, &temp)
                || (temp & ARMul_CP13_R0_FIQ))
#endif
            SETABORT (INTBITS,
                      state->prog32Sig ? FIQ32MODE : FIQ26MODE,
                      esize);
        break;
    }

    if (ARMul_MODE32BIT) {
        /*if (state->mmu.control & CONTROL_VECTOR)
          vector += 0xffff0000;	//for v4 high exception  address*/
        if (state->vector_remap_flag)
            vector += state->vector_remap_addr; /* support some remap function in LPC processor */
        ARMul_SetR15 (state, vector);
    } else
        ARMul_SetR15 (state, R15CCINTMODE | vector);
}