Public release

README.md

@@ -3,13 +3,29 @@ This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAl
 
 Consumable proprietary rubber dampeners begone!  Uses a tok tleu1-618-5w torque limiter as tensioning just like a valkyrie knob assembly!
 
+Note: This project has been fitted and tested but is still in beta.
+
 This mod requires:
 - 2x tok tleu1-618-5w
 - 2x Part1 (3D printed)
 - 2x Part2 (3D printed)
 
-Pick up a kit or individual torque limiters here:
-https://www.speedylabs.us/
+Barebones guide:
+1. Remove magnetic bottom cover of your faucetwo
+2. (Optional if your dampeners are already worn out.  Skip to step 4.) Remove dampener and plastic support pieces.  More detail is available in Gamo2's manual https://www.gamo2.com/en/download/Faucetwo_manual_en_20210106.pdf .
+3. Reassemble the knob assembly without the dampener and plastic support pieces, but don't put on the spoked wheel yet.
+4. Line up the spoked wheel on the end of the shaft, then sandwich it with Part1.  Screw in the 2 M3 screws.
+5. Unscrew the two screws holding down the two light sensors in place, leaving the middle screw alone.
+6. Put the screws into Part2 and line it up on top of the boards and screw it in.
+7. Repeat with the second knob assembly.
+8. Put the cover back on.  You're done!
+
+
+## Pick up a kit or individual torque limiters here:  
+https://www.speedylabs.us/product/faucetwo-torque-limiter-upgrade-kit/  
 https://bluespringexpress.net/en-us/products/sound-voltex-torque-limiter-tok-tleu-618-5w
 
 Note: The older tok tle1-618-5w is dimensionally shorter and won't work without some modifications.
+
+P.S.
+Honestly speaking, a fresh set of rubber dampeners on the faucetwo feels buttery smooth.  I was very surprised by this.  This mod still feels great in my opinion, but brings the smoothness of the knobs from a 10 down to a 9.  I think it's worth the tradeoff of never having to replace dampeners, but just thought I'd let y'all know my opinion after testing.

Tools/README.md

@@ -0,0 +1,2 @@
+# m4_nut_attach
+This is just a tool to remove the m4 nuts if you don't have your own or lost the included hexagon socket screwdriver that came with your faucetwo.  It attaches to a 1/4" hex drive.