Cool_Tools/faucetwo-torque-limiter
1
0
Fork 0
mirror of https://github.com/speedypotato/faucetwo-torque-limiter.git synced 2024-11-27 16:10:50 +01:00
Code Releases Activity

Update README.md

Browse Source
This commit is contained in:
Nick G 2023-09-14 23:10:01 -04:00 committed by GitHub
parent 5bf81dd366
commit 2fd1846b30
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 8 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
README.md
View File

@ -11,9 +11,11 @@ This mod requires:
- 2x tok tleu1-618-5w - 2x tok tleu1-618-5w
- 2x Part1 (3D printed) - 2x Part1 (3D printed)
- 2x Part2 (3D printed) - 2x Part2 (3D printed)
- 2x Part3 (3D printed, optional)
Video Guide: Video Guide:
https://youtu.be/wjkP9TPzm_8?si=DwbVowPt-fkSv-2N New: https://youtu.be/agtuq-vSzC4?si=kTFLQlY_rWy64dil
Old(shows removal of rubber dampeners): https://youtu.be/wjkP9TPzm_8?si=DwbVowPt-fkSv-2N
Barebones guide: Barebones guide:
1. Remove magnetic bottom cover of your faucetwo 1. Remove magnetic bottom cover of your faucetwo
@ -21,10 +23,11 @@ Barebones guide:
3. Reassemble the knob assembly without the dampener and plastic support pieces, but don't put on the spoked wheel yet. 3. Reassemble the knob assembly without the dampener and plastic support pieces, but don't put on the spoked wheel yet.
4. Line up the spoked wheel on the end of the shaft, then sandwich it with Part1. Screw in the 2 M3 screws. 4. Line up the spoked wheel on the end of the shaft, then sandwich it with Part1. Screw in the 2 M3 screws.
5. Insert the torque limiter into Part1, lining up the tabs with the slots. It should be a fairly tight press fit. If your tabs aren't aligned, the torque limiter will be too tall. You can pinch the torque limiter and rotate it while it's in Part1 to adjust. 5. Insert the torque limiter into Part1, lining up the tabs with the slots. It should be a fairly tight press fit. If your tabs aren't aligned, the torque limiter will be too tall. You can pinch the torque limiter and rotate it while it's in Part1 to adjust.
6. Unscrew the two screws holding down the two light sensors in place, leaving the middle screw alone. 6. Unscrew the 3 screws holding the light sensor boards in place and pull out the light sensors. Unscrew the 2 longer screws and remove the bracket. Replace with Part3, remount with the 2 screws, and inser the boards into the slots. Only screw in the middle screw, then proceed to the next step.
7. Put the screws into Part2 and line it up on top of the boards and screw it in. Make sure to align the torque limiter slot with Part2. 7. Unscrew the two screws holding down the two light sensors in place, leaving the middle screw alone. (if you didn't install Part3)
8. Repeat with the second knob assembly. 8. Put the screws into Part2 and line it up on top of the boards and screw it in. Make sure to align the torque limiter slot with Part2.
9. Put the cover back on. You're done! 9. Repeat with the second knob assembly.
10. Put the cover back on. You're done!
## Pick up a kit or individual torque limiters here: ## Pick up a kit or individual torque limiters here:
https://www.speedylabs.us/product/faucetwo-torque-limiter-upgrade-kit/ https://www.speedylabs.us/product/faucetwo-torque-limiter-upgrade-kit/