70 lines
2.0 KiB
Plaintext
70 lines
2.0 KiB
Plaintext
# SEGA Lindbergh Emulator Configuration File
|
|
# Written by Bobby Dilley
|
|
|
|
# Set the colour of the lindbergh to change the Segaboot logo
|
|
# Possible colours are: YELLOW and RED
|
|
# LINDBERGH_COLOUR YELLOW
|
|
|
|
# Choice of resolutions
|
|
# 640 x 480
|
|
# 800 x 600
|
|
# 1024 x 768
|
|
# 1280 x 1024
|
|
# 800 x 480
|
|
# 1024 x 600
|
|
# 1280 x 768
|
|
# 1360 x 768
|
|
|
|
# Set the requested dip switch width here
|
|
# WIDTH 640
|
|
|
|
# Set the requested dip switch height here
|
|
# HEIGHT 480
|
|
|
|
# Set if the emulator should emulate JVS and use the keyboard/mouse for controls.
|
|
# If this is set to 0, then the emulator will route the traffic to the serial device
|
|
# defined in RIDEBOARD_PATH if it has been defined.
|
|
# EMULATE_JVS 0
|
|
|
|
# Set if the emulator should emulate the rideboard used in the special games here
|
|
# If this is set to 0, then the emulator will route the traffic to the serial device
|
|
# defined in RIDEBOARD_PATH if it has been defined.
|
|
# EMULATE_RIDEBOARD 1
|
|
|
|
# Set if the emulator should emulate the driveboard used in driving games here
|
|
# If this is set to 0, then the emulator will route the traffic to the serial device
|
|
# defined in DRIVEBOARD_PATH if it has been defined.
|
|
# EMULATE_DRIVEBOARD 1
|
|
|
|
# Set if the emulator should emulate the motion board from Outrun 2 SP SDX here
|
|
# If this is set to 0, then the emulator will route the traffic to the serial device
|
|
# defined in MOTIONBOARD_PATH if it has been defined.
|
|
# EMULATE_MOTIONBOARD 1
|
|
|
|
# Define the path to pass the JVS packets to if JVS is not being emulated.
|
|
# JVS_PATH /dev/ttyUSB0
|
|
|
|
# Define the path to pass the first serial port to if it's not being emulated.
|
|
# SERIAL_1_PATH /dev/ttyUSB0
|
|
|
|
# Define the path to pass the second serial port to if it's not being emulated.
|
|
# SERIAL_2_PATH /dev/ttyUSB0
|
|
|
|
# Define the path to the sram.bin file
|
|
# SRAM_PATH sram.bin
|
|
|
|
# Define the path to the eeprom.bin file
|
|
# EEPROM_PATH eeprom.bin
|
|
|
|
# Set if the emulator should go full screen
|
|
# FULLSCREEN 0
|
|
|
|
# Set the Region ( JP/US/EX )
|
|
# REGION EX
|
|
|
|
# Set if you want the game to be Free Play
|
|
# FREEPLAY 1
|
|
|
|
# Set if you want to see debug messages in the console
|
|
# DEBUG_MSGS 1
|