72 lines
2.0 KiB
Plaintext
72 lines
2.0 KiB
Plaintext
# SEGA Lindbergh Emulator Configuration File
|
|
# Written by Bobby Dilley
|
|
|
|
# Set the colour of the lindbergh to change the Segaboot logo
|
|
# Possibly colours are: YELLOW and RED
|
|
LINDBERGH_COLOUR YELLOW
|
|
|
|
# Choice of resolutions
|
|
# 640 x 480
|
|
# 800 x 600
|
|
# 1024 x 768
|
|
# 1280 x 1024
|
|
# 800 x 480
|
|
# 1024 x 600
|
|
# 1280 x 768
|
|
# 1360 x 768
|
|
|
|
# Set the requested dip switch width here
|
|
WIDTH 640
|
|
|
|
# Set the requested dip switch height here
|
|
HEIGHT 480
|
|
|
|
# Set if the emulator should emulate JVS and use the keyboard/mouse for controls.
|
|
# If this is set to 0, then the emulator will route the traffic to the serial device
|
|
# defined in RIDEBOARD_PATH if it has been defined.
|
|
EMULATE_JVS 1
|
|
|
|
# Set if the emulator should emulate the rideboard used in the special games here
|
|
# If this is set to 0, then the emulator will route the traffic to the serial device
|
|
# defined in RIDEBOARD_PATH if it has been defined.
|
|
EMULATE_RIDEBOARD 0
|
|
|
|
# Set if the emulator should emulate the driveboard used in driving games here
|
|
# If this is set to 0, then the emulator will route the traffic to the serial device
|
|
# defined in DRIVEBOARD_PATH if it has been defined.
|
|
EMULATE_DRIVEBOARD 0
|
|
|
|
# Set if the emulator should emulate the motion board from Outrun 2 SP SDX here
|
|
# If this is set to 0, then the emulator will route the traffic to the serial device
|
|
# defined in MOTIONBOARD_PATH if it has been defined.
|
|
EMULATE_MOTIONBOARD 0
|
|
|
|
# Define the path to pass the JVS packets to
|
|
JVS_PATH /dev/ttyUSB0
|
|
|
|
# Define the path to pass the rideboard packets to
|
|
RIDEBOARD_PATH /dev/ttyUSB0
|
|
|
|
# Define the path to pass the driveboard packets to
|
|
DRIVEBOARD_PATH /dev/ttyUSB0
|
|
|
|
# Define the path to pass the motionboard packets to
|
|
MOTIONBOARD_PATH /dev/ttyUSB0
|
|
|
|
# Define the path to the sram.bin file
|
|
SRAM_PATH sram.bin
|
|
|
|
# Define the path to the eeprom.bin file
|
|
EEPROM_PATH eeprom.bin
|
|
|
|
# Set if the emulator should go full screen
|
|
FULLSCREEN 0
|
|
|
|
# Set the Region ( JP/US/EX )
|
|
REGION EX
|
|
|
|
# Set if you want the game to be Free Play
|
|
FREEPLAY 1
|
|
|
|
# Set if you want to see degug messages in the console
|
|
DEBUG_MSGS 0 |