removed top speeds, fixed ble stlink versions

This commit is contained in:
lekrsu 2023-09-23 18:17:02 +02:00
parent daf0314266
commit 717d659474

View File

@ -24,7 +24,7 @@ To install SHFW, follow these steps:
- **Ninebot G30**: You can flash this firmware if the DRV version is at 1.7.0 or below. For DRV versions above 1.7.0, you'll need an ST-link. Refer to [https://joeybabcock.me/wiki/STLink_Ninebot_Max_ESC](https://joeybabcock.me/wiki/STLink_Ninebot_Max_ESC) for more information.
- **Xiaomi Scooters**: If the BLE version is above 1.5.7, you'll need an ST-link. There are online guides available for this process.
- **Xiaomi Scooters**: If the BLE version is at or above 1.5.7, you'll need an ST-link. There are online guides available for this process.
3. Flash Procedure:
@ -47,8 +47,6 @@ To achieve the top speed for Ninebot G30, follow these configurations:
- Enable field weakening for sport mode.
- Configure as follows: 20 km/h, 0A, 1700.
3. Max speed on this could be 45 km/h.
#### [Xiaomi Pro 2](#xiaomi-pro-2)
For Xiaomi Pro 2, use the following configurations:
@ -59,8 +57,6 @@ For Xiaomi Pro 2, use the following configurations:
- Enable field weakening for sport mode.
- Configure as follows: 20 km/h, 0A, 1300.
3. Max speed on this could be 40 km/h.
#### [Xiaomi Essential, Lite, 1S, 3](#xiaomi-essential-lite-1s-3)
For Xiaomi Essential, Lite, 1S, and 3 models, use these configurations:
@ -70,9 +66,7 @@ For Xiaomi Essential, Lite, 1S, and 3 models, use these configurations:
2. Go to the field weakening tab and:
- Enable field weakening for sport mode.
- Configure as follows: 15 km/h, 0A, 1000.
3. Max speed on this could be 40 km/h.
The rest of the configurations are up to you. Feel free to explore and set up profiles according to your preferences. Your imagination is the limit.
### Field Weakening Calculations and Logic