From 9bb305189ceb53df6addc38bc4a4559bed50640f Mon Sep 17 00:00:00 2001 From: lekrsu Date: Fri, 3 May 2024 21:10:23 +0200 Subject: [PATCH] Info clarification --- README.md | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/README.md b/README.md index ce15884..584e19c 100644 --- a/README.md +++ b/README.md @@ -1,6 +1,6 @@ ## Quick SHFW Configuration Walkthrough -## SHFW 3.7.0 is out, go test it out! +## SHFW 3.7.1 is out, go test it out! For a detailed list of new features and improvements in SHFW 3.7.1, see the [3.7.1 Changelog](#371-changelog). @@ -23,7 +23,6 @@ SHFW is a custom firmware available for flashing via the Scooterhacking Utility - [License](#license) - [Author Information](#author-information) - ### Installation To install SHFW, follow these steps: @@ -46,11 +45,10 @@ To install SHFW, follow these steps: - Ensure you have the correct scooter model. - Open the utility app, connect to the scooter. - - Press "Load Custom" and select SHFW. + - Press "Install/update SHFW" and select a version of the highest number.If there's only one, select that. - If you have the new G30 motor then select the new motor option under the system config tab as well. - Enable "expert view" on the top right. - - **Note**: The number in the firmware name indicates the base DRV. + **Note**: If BLE/DRV is low enough to be supported, but fails to flash, then press "Attempt DRV downgrade" and press flash. ### Usage @@ -135,7 +133,6 @@ For Xiaomi Pro 2 and mi3, use the following configurations: 4. Under Motor Settings, select 20 or 24khz. - #### [Xiaomi Essential, Lite, 1S](#xiaomi-essential-lite-1s) For Xiaomi Essential Lite, use these configurations: @@ -162,7 +159,6 @@ The calculation for field weakening flux is as follows: field weakening flux = initial + ("current speed" - "field weakening start speed") * (variable / 1000) - - `initial`: The initial value of the field weakening flux. - `"current speed"`: The current speed of the scooter. - `"field weakening start speed"`: The speed at which field weakening should start. @@ -216,7 +212,6 @@ Special thanks to BXLR for providing valuable information on the R_adc logic. **Note2**: You can also measure your battery voltage and then increase the divider voltage until the system voltage reading matches your previous meassuring. **Note3**: You only need to touch this setting once you changed the resistors on the esc. - ## Contributors to this repo - **[lekrsu](https://github.com/lekrsu)** - Main contributor and architect. @@ -228,7 +223,6 @@ Special thanks to BXLR for providing valuable information on the R_adc logic. > A big thank you to everyone who has contributed to making this project a success! - ### License This project is licensed under the [MIT License](LICENSE).