From 08295d6e05cba030aed8b0d5b4d75a00c85e1c44 Mon Sep 17 00:00:00 2001 From: Thomas Daede Date: Sun, 7 May 2023 23:49:42 -0700 Subject: [PATCH] Add acceptance test --- ACCEPTANCE_TEST.md | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 ACCEPTANCE_TEST.md diff --git a/ACCEPTANCE_TEST.md b/ACCEPTANCE_TEST.md new file mode 100644 index 0000000..343773b --- /dev/null +++ b/ACCEPTANCE_TEST.md @@ -0,0 +1,23 @@ +# Programming + +Plug the micro-USB port on the edge of td-io into a computer. It will appear as a USB flash drive. Drag and drop the firmware U2F file onto the flash drive. When programming is complete, the drive will disconnect automatically. + +Once programmed, the white button must be held when plugging in the USB cable to re-enter programming mode. + +# Basic test + +1. Power the board via a JAMMA supergun. + +2. Measure the pins on the JVS power connector and make sure the +3.3V line measures between 3.27V and 3.39V. + +3. Ensure the volume pot turns smoothly and is not loose. + +4. Set the switch default positions to 2 coin chutes and mono sound. + +# Functionality test + +4. Attach a JVS host to the JVS connectors. Ensure that the green LED illuminates once the host initializes JVS. + +5. Attach a sound source to the RCA connectors. Ensure that the sound is audible via either the JAMMA connector or via the stereo header. + +6. Attach a video source to the VGA connector. Ensure that video appears via the supergun.