#include #include "pico/stdlib.h" #include "hardware/adc.h" #include const uint PIN_JVS_RE = 2; const uint PIN_JVS_DE = 3; const uint PIN_JVS_SENSE_2_5V = 14; const uint PIN_JVS_SENSE_0V = 13; const uint PIN_JVS_TERMINATION = 15; const uint PIN_JVS_SENSE_IN_HIGH = 11; const uint PIN_JVS_SENSE_IN_LOW = 12; const uint PIN_SR_DATA = 20; const uint PIN_SR_CLK = 18; const uint PIN_SR_SH = 21; const uint PIN_METER1 = 8; const uint PIN_METER2 = 7; const uint PIN_LOCKOUT1 = 10; const uint PIN_LOCKOUT2 = 9; const uint PIN_LED_ENUMERATED = PICO_DEFAULT_LED_PIN; const uint PIN_DIP1 = 17; const uint PIN_DIP2 = 16; const uint16_t JVS_TERMINATION_THRESHOLD = (uint16_t)(3.75/2.0/3.3*4096); const uint16_t JVS_0V_THRESHOLD = (uint16_t)(1.25/2.0/3.3*4096); const uint8_t JVS_STATUS_GOOD = 1; const uint8_t JVS_STATUS_UNKNOWN_COMMAND = 2; const uint8_t JVS_STATUS_CHECKSUM_ERROR = 3; const uint8_t JVS_STATUS_OVERFLOW = 4; const uint8_t JVS_REPORT_GOOD = 1; const uint8_t JVS_REPORT_PARAMETER_INVALID = 3; const uint8_t JVS_MAX_LEN = 253; // minus two for status and checksum // global state uint8_t our_address = 0; uint64_t last_process_coin = 0; // signed for underflow checks int16_t coin_count_p1 = 0; int16_t coin_count_p2 = 0; uint8_t prev_coin_p1 = 0; uint8_t prev_coin_p2 = 0; #define SR_P1_3 7 #define SR_P2_3 6 #define SR_P1_4 5 #define SR_P2_4 4 #define SR_P1_5 3 #define SR_P2_5 2 #define SR_P1_6 1 #define SR_P2_6 0 #define SR_P1_LEFT 15 #define SR_P2_LEFT 14 #define SR_P1_RIGHT 13 #define SR_P2_RIGHT 12 #define SR_P1_1 11 #define SR_P2_1 10 #define SR_P1_2 9 #define SR_P2_2 8 #define SR_C1 23 #define SR_C2 22 #define SR_P1_START 21 #define SR_P2_START 20 #define SR_P1_UP 19 #define SR_P2_UP 18 #define SR_P1_DOWN 17 #define SR_P2_DOWN 16 #define SR_SERVICE 31 #define SR_TEST 30 #define SR_TILT 29 const uint8_t JVS_COMM_VER = 0x10; const char id_str[] = "TD;TD-IO;v1.1;https://github.com/tdaede/td-io"; const uint8_t input_desc_1coin[] = { 0x01, 2, 12, 0, 0x02, 1, 0, 0, 0x00 }; const uint8_t input_desc_2coin[] = { 0x01, 2, 12, 0, 0x02, 2, 0, 0, 0x00 }; void jvs_sync() { uart_putc(uart0, 0xe0); } uint8_t jvs_getc() { uint8_t c = uart_getc(uart0); if (c == 0xd0) { c = uart_getc(uart0); return c + 1; } else { return c; } } void jvs_putc(uint8_t c) { if (c == 0xe0) { uart_putc(uart0, 0xd0); uart_putc(uart0, 0xdf); } else if (c == 0xd0) { uart_putc(uart0, 0xd0); uart_putc(uart0, 0xcf); } else { uart_putc(uart0, c); } } void start_transmit() { gpio_put(PIN_JVS_RE, 1); // disable receive busy_wait_us_32(200); // 200us min for exa compat gpio_put(PIN_JVS_DE, 1); // enable transmitter } void stop_transmit() { uart_tx_wait_blocking(uart0); gpio_put(PIN_JVS_DE, 0); // disable transmitter gpio_put(PIN_JVS_RE, 0); // enable receiver } void send_message(uint8_t status, uint8_t* m, uint8_t msg_len) { start_transmit(); jvs_sync(); uint8_t checksum = 0; jvs_putc(0); checksum += 0; jvs_putc(msg_len + 2); checksum += msg_len + 2; jvs_putc(status); checksum += status; for (int i = 0; i < msg_len; i++) { jvs_putc(m[i]); checksum += m[i]; } jvs_putc(checksum); stop_transmit(); } uint32_t read_switches() { uint32_t r; gpio_put(PIN_SR_SH, 1); busy_wait_us(1); for (int i = 0; i < 32; i++) { r >>= 1; r |= (gpio_get(PIN_SR_DATA) ? 1 : 0) << 31; gpio_put(PIN_SR_CLK, 1); busy_wait_us(1); gpio_put(PIN_SR_CLK, 0); busy_wait_us(1); } gpio_put(PIN_SR_SH, 0); return ~r; } void update_termination() { if (gpio_get(PIN_JVS_SENSE_IN_HIGH)) { gpio_put(PIN_JVS_TERMINATION, 0); } else { gpio_put(PIN_JVS_TERMINATION, 1); } } // call periodically with switch read to check level changes of coin input void process_coin(uint32_t switches) { if ((switches >> SR_C1 & 1) && !prev_coin_p1) { coin_count_p1++; if (coin_count_p1 > 16383) { coin_count_p1 = 16383; } } if ((switches >> SR_C2 & 1) && !prev_coin_p2) { coin_count_p2++; if (coin_count_p2 > 16383) { coin_count_p2 = 16383; } } prev_coin_p1 = switches >> SR_C1 & 1; prev_coin_p2 = switches >> SR_C2 & 1; gpio_put(PIN_METER1, prev_coin_p1); gpio_put(PIN_METER2, prev_coin_p2); gpio_put(PIN_LOCKOUT1, coin_count_p1 >= 16383); gpio_put(PIN_LOCKOUT2, coin_count_p2 >= 16383); } int main() { stdio_init_all(); uart_init(uart0, 115200); uart_set_translate_crlf(uart0, false); gpio_set_function(0, GPIO_FUNC_UART); gpio_set_function(1, GPIO_FUNC_UART); gpio_init(PIN_JVS_RE); gpio_put(PIN_JVS_RE, 0); // enable receiver gpio_set_dir(PIN_JVS_RE, GPIO_OUT); gpio_init(PIN_JVS_DE); gpio_put(PIN_JVS_DE, 0); //disable transmitter gpio_set_dir(PIN_JVS_DE, GPIO_OUT); gpio_init(PIN_JVS_SENSE_2_5V); gpio_put(PIN_JVS_SENSE_2_5V, 1); // always appear present gpio_set_dir(PIN_JVS_SENSE_2_5V, GPIO_OUT); gpio_init(PIN_JVS_SENSE_0V); gpio_put(PIN_JVS_SENSE_0V, 0); gpio_set_dir(PIN_JVS_SENSE_0V, GPIO_OUT); gpio_init(PIN_JVS_TERMINATION); gpio_put(PIN_JVS_TERMINATION, 1); // disable termination by default gpio_set_dir(PIN_JVS_TERMINATION, GPIO_OUT); gpio_init(PIN_JVS_SENSE_IN_LOW); gpio_set_dir(PIN_JVS_SENSE_IN_LOW, GPIO_IN); gpio_pull_up(PIN_JVS_SENSE_IN_LOW); gpio_init(PIN_JVS_SENSE_IN_HIGH); gpio_set_dir(PIN_JVS_SENSE_IN_HIGH, GPIO_IN); gpio_pull_up(PIN_JVS_SENSE_IN_HIGH); // sr gpio_init(PIN_SR_DATA); gpio_set_dir(PIN_SR_DATA, GPIO_IN); gpio_init(PIN_SR_CLK); gpio_put(PIN_SR_CLK, 0); gpio_set_dir(PIN_SR_CLK, GPIO_OUT); gpio_init(PIN_SR_SH); gpio_put(PIN_SR_SH, 0); gpio_set_dir(PIN_SR_SH, GPIO_OUT); // coin/lockout drivers gpio_init(PIN_METER1); gpio_put(PIN_METER1, 0); gpio_set_dir(PIN_METER1, GPIO_OUT); gpio_init(PIN_METER2); gpio_put(PIN_METER2, 0); gpio_set_dir(PIN_METER2, GPIO_OUT); gpio_init(PIN_LOCKOUT1); gpio_put(PIN_LOCKOUT1, 0); gpio_set_dir(PIN_LOCKOUT1, GPIO_OUT); gpio_init(PIN_LOCKOUT2); gpio_put(PIN_LOCKOUT2, 0); gpio_set_dir(PIN_LOCKOUT2, GPIO_OUT); // ui gpio_init(PIN_LED_ENUMERATED); gpio_put(PIN_LED_ENUMERATED, 0); gpio_set_dir(PIN_LED_ENUMERATED, GPIO_OUT); gpio_init(PIN_DIP1); gpio_set_dir(PIN_DIP1, GPIO_IN); gpio_pull_up(PIN_DIP1); update_termination(); while (true) { const uint64_t now = time_us_64(); if ((now - last_process_coin) > 20000) { uint32_t switches = read_switches(); process_coin(switches); last_process_coin = now; } if (uart_is_readable(uart0) && uart_getc(uart0) == 0xe0) { uint8_t our_checksum = 0; uint8_t node_num = jvs_getc(); if (!((node_num == 0xff) || ((our_address == node_num) && (our_address != 0)))) { continue; } our_checksum += node_num; uint8_t length = jvs_getc(); our_checksum += length; uint8_t msg_length = length - 1; uint8_t message[256]; for (int i = 0; i < msg_length; i++) { uint8_t c = jvs_getc(); our_checksum += c; message[i] = c; } uint8_t msg_send[256*2]; // a few bytes to spare for easier overflow checking int o = 0; uint8_t status = JVS_STATUS_GOOD; uint8_t their_checksum = jvs_getc(); if (our_checksum == their_checksum) { int i = 0; while (i < msg_length) { if ((msg_length - i) >= 2 && message[i] == 0xf0 && message[i+1] == 0xd9) { printf("N: %02x Reset\n", node_num); our_address = 0; gpio_put(PIN_JVS_SENSE_0V, 0); gpio_put(PIN_LED_ENUMERATED, 0); i += 2; } else if ((msg_length - i) >= 2 && message[i] == 0xf1) { uint8_t node_id = message[i+1]; i += 2; printf("Assign node id N: %02x\n", node_id); if ((our_address == 0) && (gpio_get(PIN_JVS_SENSE_IN_HIGH) || !gpio_get(PIN_JVS_SENSE_IN_LOW))) { printf("Assigning our address\n"); our_address = node_id; msg_send[o] = JVS_REPORT_GOOD; o++; gpio_put(PIN_JVS_SENSE_0V, 1); gpio_put(PIN_LED_ENUMERATED, 1); } else { printf("We are not currently last in the chain, skipping assignment\n"); } } else if ((msg_length - i) >= 1 && message[i] == 0x10) { i++; printf("Got ID code request\n"); msg_send[o] = JVS_REPORT_GOOD; o++; strcpy((char*)&msg_send[o], id_str); o += strlen(id_str) + 1; } else if ((msg_length - i) >= 1 && message[i] == 0x11) { i++; printf("Got revision request\n"); msg_send[o] = JVS_REPORT_GOOD; o++; msg_send[o] = 0x13; o++; } else if ((msg_length - i) >= 1 && message[i] == 0x12) { i++; printf("Got video revision request\n"); msg_send[o] = JVS_REPORT_GOOD; o++; msg_send[o] = 0x30; o++; } else if ((msg_length - i) >= 1 && message[i] == 0x13) { i++; printf("Got comm revision request\n"); msg_send[o] = JVS_REPORT_GOOD; o++; msg_send[o] = JVS_COMM_VER; o++; } else if ((msg_length - i) >= 1 && message[i] == 0x14) { i++; printf("Got input descriptor request\n"); msg_send[o] = JVS_REPORT_GOOD; o++; if (!gpio_get(PIN_DIP1)) { memcpy(&msg_send[o], input_desc_1coin, sizeof(input_desc_1coin)); o += sizeof(input_desc_1coin); } else { memcpy(&msg_send[o], input_desc_2coin, sizeof(input_desc_2coin)); o += sizeof(input_desc_2coin); } } else if ((msg_length - i) >= 1 && message[i] == 0x15) { i++; printf("Got main board ID: "); while (i < msg_length) { char c = message[i]; i++; if (c == 0) break; putchar(message[i]); } printf("\n"); msg_send[o] = JVS_REPORT_GOOD; o++; } else if ((msg_length - i) >= 3 && message[i] == 0x20) { int num_players = message[i+1]; int bytes_per_player = message[i+2]; i += 3; if (o + num_players*bytes_per_player >= JVS_MAX_LEN) { printf("JVS response overflow!\n"); status = JVS_STATUS_OVERFLOW; break; } msg_send[o] = JVS_REPORT_GOOD; o++; uint32_t switches = read_switches(); if ((now - last_process_coin) > 12000) { process_coin(switches); last_process_coin = now; } msg_send[o] = ((switches >> SR_TEST) & 1) << 7 | ((switches >> SR_TILT) & 1) << 6; o++; //printf("Got switch request for %02x players\n", num_players); for (int player = 0; player < num_players; player++) { for (int byte = 0; byte < bytes_per_player; byte++) { uint8_t b = 0; if ((player == 0) && (byte == 0)) { b = ((switches >> SR_P1_2) & 1) << 0 | ((switches >> SR_P1_1) & 1) << 1 | ((switches >> SR_P1_RIGHT) & 1) << 2 | ((switches >> SR_P1_LEFT) & 1) << 3 | ((switches >> SR_P1_DOWN) & 1) << 4 | ((switches >> SR_P1_UP) & 1) << 5 | ((switches >> SR_SERVICE) & 1) << 6 | ((switches >> SR_P1_START) & 1) << 7; } else if ((player == 0) && (byte == 1)) { b = ((switches >> SR_P1_6) & 1) << 4 | ((switches >> SR_P1_5) & 1) << 5 | ((switches >> SR_P1_4) & 1) << 6 | ((switches >> SR_P1_3) & 1) << 7; } else if ((player == 1) && (byte == 0)) { b = ((switches >> SR_P2_2) & 1) << 0 | ((switches >> SR_P2_1) & 1) << 1 | ((switches >> SR_P2_RIGHT) & 1) << 2 | ((switches >> SR_P2_LEFT) & 1) << 3 | ((switches >> SR_P2_DOWN) & 1) << 4 | ((switches >> SR_P2_UP) & 1) << 5 | ((switches >> SR_P2_START) & 1) << 7; } else if ((player == 1) && (byte == 1)) { b = ((switches >> SR_P2_6) & 1) << 4 | ((switches >> SR_P2_5) & 1) << 5 | ((switches >> SR_P2_4) & 1) << 6 | ((switches >> SR_P2_3) & 1) << 7; } msg_send[o] = b; o++; } } } else if ((msg_length - i) >= 2 && message[i] == 0x21) { int slots = message[i+1]; i += 2; if (o + slots*2 >= JVS_MAX_LEN) { printf("JVS response overflow!\n"); status = JVS_STATUS_OVERFLOW; break; } msg_send[o] = JVS_REPORT_GOOD; o++; //printf("Got coin slot request for %02x slots\n", slots); for (int slot = 0; slot < slots; slot++) { if (slot == 0) { msg_send[o] = coin_count_p1 >> 8; msg_send[o+1] = coin_count_p1 & 0xFF; } else if (slot == 1) { msg_send[o] = coin_count_p2 >> 8; msg_send[o+1] = coin_count_p2 & 0xFF; } else { msg_send[o] = 0x80; msg_send[o+1] = 0x00; } o += 2; } } else if ((msg_length - i) >= 4 && message[i] == 0x30) { uint8_t slot = message[i+1]; uint16_t amount = (message[i+2] << 8) + message[i+3]; i += 4; printf("Decrement coin counter %d by %d\n", (int)slot, (int)amount); if (amount > 16383) { amount = 16383; printf("Capped to 16383\n"); } if (slot == 1) { msg_send[o] = JVS_REPORT_GOOD; coin_count_p1 -= amount; if (coin_count_p1 < 0) { coin_count_p1 = 0; } } else if (slot == 2) { msg_send[o] = JVS_REPORT_GOOD; coin_count_p2 -= amount; if (coin_count_p2 < 0) { coin_count_p2 = 0; } } else { printf("Invalid coin counter slot\n"); msg_send[o] = JVS_REPORT_PARAMETER_INVALID; } o++; } else if ((msg_length - i) >= 4 && message[i] == 0x35) { uint8_t slot = message[i+1]; uint16_t amount = (message[i+2] << 8) + message[i+3]; i += 4; printf("Increment coin counter %d by %d\n", (int)slot, (int)amount); if (amount > 16383) { amount = 16383; printf("Capped to 16383\n"); } if (slot == 1) { msg_send[o] = JVS_REPORT_GOOD; coin_count_p1 += amount; if (coin_count_p1 > 16383) { coin_count_p1 = 16383; } } else if (slot == 2) { msg_send[o] = JVS_REPORT_GOOD; coin_count_p2 += amount; if (coin_count_p2 > 16383) { coin_count_p2 = 16383; } } else { printf("Invalid coin counter slot\n"); msg_send[o] = JVS_REPORT_PARAMETER_INVALID; } o++; } else { printf("Unsupported message: N: %02x L: %02x M: ", node_num, msg_length); for (int j = 0; j < msg_length; j++) { printf("%02x", message[j]); } printf("\n"); status = JVS_STATUS_UNKNOWN_COMMAND; break; } if (o >= JVS_MAX_LEN) { printf("JVS response overflow!\n"); status = JVS_STATUS_OVERFLOW; break; } } fflush(stdout); if ((o > 0) || (status != JVS_STATUS_GOOD)) { send_message(status, msg_send, o); } } else { printf("Checksum mismatch: theirs: %02x ours: %02x\n", their_checksum, our_checksum); status = JVS_STATUS_CHECKSUM_ERROR; send_message(status, msg_send, 0); } } else { // note because of disabling the rx, we always read a 00 byte after sending here update_termination(); // convenient time to read adc //printf("Saw non-sync code %02x\n", sync); } } return 0; }