iidx11: revamp setup & troubleshooting

docs/games/iidx11/setup.md

@@ -1,89 +1,130 @@
 # beatmania IIDX 11 IIDX RED
-
 <img src="/img/iidx11/RED_logo.png">
 
-!!! warning "Before reading"
+!!! danger "Please make sure you downloaded your data from an appropriate source.<br>This guide is unable to troubleshoot any problems related to bad or poorly managed data."
-	This game ***will*** require you to touch and edit files manually. This guide tries to make everything as clear as possible. **[Bemanitools](https://github.com/djhackersdev/bemanitools/releases/download/5.44/bemanitools-5.44.zip) & [Bemanitools Supplement](https://github.com/djhackersdev/bemanitools-supplement/releases/download/1.6/bemanitools-supplement-1.6.zip)** will be used in this guide.
 
-!!! danger "Warning:"
+### Preparing data
-	Please make sure your data is from an appropriate source and unmodified before proceeding, this guide is unable to troubleshoot any problems related to bad or poorly managed data.
-	
-	If you encounter any issues or errors regarding this guide or come across issues that aren't listed, feel free to open up a [GitHub Issue!](https://github.com/two-torial/two-torial/issues)
-
-
-### Getting Started
 
 !!! tip ""
 
-	After downloading your data, the first thing to do is make sure your files aren't set to READ ONLY, make sure to uncheck it from the main folder in the Windows Properties tab if so. Then, locate `iidx-09-to-12.zip` inside the `bemanitools-5.44.zip`. Extract it inside the folder that contains the `bm2dx.exe` which should be located in `\E11\JAA`. Pictured below is what your folder should look like, we've removed any files not necessary for **IIDX RED**. Feel free to name your `gamestart.bat` file whatever you desire, for the sake of convenience we've kept it as it.
+	After downloading and extracting your data, we need to make sure your files aren't set to `Read-only`.
 
-<img src="/img/iidx10/bt1.png">
+	- Right click the folder containing your data, then click on `Properties`.
+	- In the `General` tab go down to `Attributes`, untick `Read-only` and click `Apply`.
+	- A popup will appear, select `Apply changes to this folder, subfolder and files` and press `OK`.
+	- Finally, click `OK` again to exit out of properties.
 
-<img src="/img/iidx10/bt2.png">
+---
-
+### Installing Bemanitools
-<img src="/img/iidx11/1.png">
 
 !!! tip ""
 	
-	Next up, open the `bemanitools-supplement-v1.6.zip` or any version higher than that and navigate inside the `misc.zip`. Now navigate into `misc\d3d8to9` and extract `d3d8.dll` into the same folder as we previously have done. This enables us to use the graphic options inside `iidxhook-11.conf` which we will take advantage of. It should look like this:
+	- Download :material-package-down:[Bemanitools](https://github.com/djhackersdev/bemanitools/releases/download/5.48/bemanitools-5.48.zip).
   
-<img src="/img/iidx10/btsup1.png">
+	- Inside :material-zip-box:`bemanitools-5.48.zip` locate :material-zip-box:`iidx-09-to-12.zip`.
 
-<img src="/img/iidx11/2.png">
+	- Extract everything inside the folder that contains the :material-file:`bm2dx.exe` which is located in :material-folder:`\E11\JAA`.
+	
+	Pictured below is what your folder should look like. We've removed any files not necessary for **IIDX RED**.
+
+<img src="/img/iidx11/setup/1.png">
+
+#### Using iidxhook-11.conf & RtEffect.dll
 
 !!! tip ""
 
-	Now, open up `bemanitools-supplement-v1.6.zip` again and navigate into `iidx.zip`. Next, navigate into `iidx/misc` and extract `RtEffect_stub.dll` into the same folder as we previously have done. 
+	- Download the :material-package-down:[Bemanitools supplements](https://github.com/djhackersdev/bemanitools-supplement/releases/download/1.6/bemanitools-supplement-1.6.zip)
 
-	Delete the already existing `RtEffect.dll` and rename `RtEffect_stub.dll` to `RtEffect.dll`. This will eliminate any immediate crashes relating to needing specific old hardware.
+	- Open :material-zip-box:`bemanitools-supplement-v1.6.zip` and navigate inside :material-zip-box:`misc.zip`
 
-<img src="/img/iidx10/btsup2.png">
+	- Inside :material-folder:`misc\d3d8to9`, extract :material-file-cog-outline:`d3d8.dll` to :material-folder:`\E11\JAA`.
 
-<img src="/img/iidx11/3.png">
+	This enables us to use the graphic options inside :material-file-code:`iidxhook-11.conf` which we will take advantage of.
 
-<img src="/img/iidx11/4.png">
+	- Open :material-zip-box:`bemanitools-supplement-v1.6.zip` and navigate inside :material-zip-box:`iidx.zip`
 
-### Configuring Your Tools
+	- Inside :material-folder:`iidx/misc`, extract :material-file-cog-outline:`RtEffect_stub.dll` to :material-folder:`\E11\JAA`.
+	
+	- Delete the already existing :material-file-remove-outline:`RtEffect.dll` and rename :material-file-edit-outline:`RtEffect_stub.dll` to :material-file-cog-outline:`RtEffect.dll`.
+  
+  	This will eliminate any immediate crashes relating to needing specific old hardware.
+
+---
+### Configuring Bemanitools
+
+!!! info "To configure your keybinds, open your :material-file:`config.bat` file."
+
+#### Buttons
 
 !!! tip ""
-	To configure your keybinds, open up your `config.bat` file. You'll be greeted by this screen:
 
-<img src="/img/iidx10/5.png">
+	Double click on the right on a button that you wish to bind, then press the key you want associated with the action.
+
+	With your controller and/or keyboard plugged in, configure your keys for:  
+
+	- **Maintenance**: `Service, Test`
+	- **P1 Game buttons**: `1 to 7, Start, EFFECT, VEFX` 
+	- **P1 Keypad**: `Keypad Insert Card` 
+
+	**Only if** you're playing using a keyboard:
+
+	- **Turntable**: `TT+, TT-` **and optionally** `TT+/-` which alternates between `TT+` and `TT-` on each press.
+
+#### Analogs (controller/cab only)
 
 !!! tip ""
-	It works similarly to Spice but not entirely. Make sure to also bind `Test` and `Service` since we will need it later. `Service` will also be used to **insert coins** to start the game. When you're done setting up your keybinds and analogs, it should look something like this:
 
-<img src="/img/iidx10/6.png">
+	With a controller rather than binding buttons to `TT+` and `TT-`, you need to:
 
-!!! info "If you'd like to play offline, you can head straight to [Setting up the games resolution](#setting-up-the-games-resolution-locking-fps-and-fixing-stretched-videos)"
+	- Head to the `Analogs` tab at the top.
+	- In `Device`, pick your controller.
+	- In `Control`, pick whichever one corresponds to the turntable.
+	- Turn your turntable ensuring that the preview turns along with it.
+	- Click `OK`, leaving the rest of the settings alone.
 
-### Configuring Bemanitools for an Online Network
+#### Lights (controller/cab only)
 
 !!! tip ""
-	After setting the keybinds and analogs, we can head over to the `Network` tab, which will look like this:
 
-<img src="/img/iidx10/7.png">
+	Your controller might support having its lights controlled by the game through bemanitools.
+
+	If it does, here's how you may link different actions to your lights:
+
+	- In `Device`, pick your controller.
+	- In `Game Light`, select the corresponding button that will be used for that light.
+	- Repeat for your other lights.
+
+!!! info "If you'd like to play offline, you can head straight to [Game resolution and locking FPS](#game-resolution-and-locking-fps)"
+
+#### Configuring Bemanitools for a network
+
+!!! tip "Head over to the `Network` tab."
 
 !!! tip ""
 	Now we will set up our PIN pad and card.
-	Click on `Keyboard device`, you may or may not have more than one option. This is normal. To figure out which one is your actual keyboard, select a device inside that list and press a button on the numpad.
+	
+	- Click on `Keyboard device`
+	- You may or may not have more than one option. To figure out which one is your actual keyboard, select a device inside that list and press a button on the numpad.
+	- Once you have found your correct device, the `Keyboard status` will change **(the number and location of the number does not matter, it only matters that it changed)**.
+	- Grab your card, create a :material-file-document-edit:`.txt` and name it however you like. In this example it's called :material-file-document-edit:`card.txt`
+	- Place the file in a location that is easily accessible and you won't forget. In this case it's in a seperate folder.
 	
 !!! info "If you don't have a numpad, make sure to tick `Use top keyboard row for PIN pad input`. This will also change the `Card In` button to `Backspace`."
 
-!!! tip ""
+<img src="/img/iidx11/setup/2.png">
-	If you have found your correct device, the `Keyboard status` will change **(the number and location of the number does not matter, it only matters that it changed)**. It should look similiar to this:
 
-<img src="/img/iidx10/8.png">
+---
+### Connecting to a network
 
 !!! tip ""
-	Next, grab your card, create a `.txt`, name it however you like, in this example it's called `card.txt` and place the file in a location that is easily accessible and you won't forget. In this case it's in a seperate folder. It should look like this:
 	
-<img src="/img/iidx10/9.png">
+	- Locate your :material-file-code:`iidxhook-11.conf`
 	
-### Configuring the game for an Online Network
+	- Open it with your desired text editor (we're using [Notepad++](https://notepad-plus-plus.org/))
 
-!!!tip ""
+	- Replace the `eamuse.server=localhost:80` with your desired network URL
-	Locate your `iidxhook-11.conf` and edit it in your desired text editor (we're using [Notepad++](https://notepad-plus-plus.org/)). It may seem overwhelming at first but it's actually fairly simple. All we really care about are these lines:
+
+	- Replace `eamuse.pcbid=XXXXXXXXXXXXXXXXXXXX` **and** `eamuse.eamid=XXXXXXXXXXXXXXXXXXXX` with your PCBID of your network of choice.
 	
 	```
 	# URL (e.g. http://my.eamuse.server:80/whatever) or IPV4 (e.g. 127.0.0.1:80) of the target eamuse server. The port is optional but defaults to 80.
@@ -96,35 +137,27 @@
 	eamuse.eamid=XXXXXXXXXXXXXXXXXXXX
 	```
 
-	Replace the `eamuse.server=localhost:80` with your desired network URL
+### Game resolution and locking FPS
-	
-	Replace `eamuse.pcbid=XXXXXXXXXXXXXXXXXXXX` **and** `eamuse.eamid=XXXXXXXXXXXXXXXXXXXX` with your PCBID of your network of choice.
-
-### Setting up the game's resolution, locking FPS and fixing stretched videos
 
 !!! tip ""
-	Before we begin, we'd like to mention that you have two options when it comes to how the game renders. You can choose between `Linear` and `Point`.
+	We'd like to mention that there are two options when it comes to how the game renders. You can choose between `Linear` and `Point`.
 
 	Below is an example of how both look like.
 
-??? info "Linear"
+	??? info "Linear"
 		<img src="/img/iidx11/iidx11_linear.png">
 
-??? info "Point"
+	??? info "Point"
 		<img src="/img/iidx11/iidx11_point.png">
 		
-!!! tip ""
 	It comes down to your own prefrence what you decide on, `Linear` is less sharp but doesn't have pixel perfect edges. `Point` is sharp and is pixel perfect.
 
 !!! tip ""
-	Next up, we'll setup borderless window, configure the proper resolution and fix stretched background videos. We're using a `1920x1080` monitor so we will use that.
+	Next up, we'll setup borderless window and configure the proper resolution. We're using a `1920x1080` monitor so we will use that.
 	
-	Repeat the previous step and open your `iidxhook-11.conf`. We want to find these lines:
+	Repeat the previous step and open your :material-file-code:`iidxhook-11.conf`. We want to find these lines:
 	
 	```
-	# Fix stretched BG videos on newer GPUs. Might appear on Red and newer
-	gfx.bgvideo_uv_fix=false
-	
 	# Software limit the frame rate of the rendering loop in hz, e.g. 60 or 59.95 (0.0 = no software limit)
 	gfx.frame_rate_limit=0.0
 	
@@ -147,15 +180,12 @@
 	gfx.scale_back_buffer_filter=none
 	```
 	
-	If you can't seem to find them, simply press `CTRL` + `F` and search for each argument. It will highlight them for you.
+	If you can't seem to find them, press `CTRL` + `F` and search for `gfx.frame_rate_limit=0.0`. This will bring you to the first line we want to edit.
-	
-<img src="/img/iidx9/8.png">
 	
 !!! tip ""
 	Listed below are the values we want to change them to.
 	
 	```
-	gfx.bgvideo_uv_fix=true
 	gfx.frame_rate_limit=59.95
 	gfx.windowed=true
 	gfx.window_width=1920
@@ -164,84 +194,100 @@
 	gfx.scale_back_buffer_height=1080
 	gfx.scale_back_buffer_filter=linear
 	```
-	Unless you'd like to have the game properly windowed you can safely ignore `gfx.framed=false`. Under normal circumstances there shouldn't be a need for you to fiddle with `gfx.monitor_check=1.000000` so we are also going to ignore it.
+	Unless you'd like to have the game properly windowed you can safely ignore `gfx.framed=false`.
 
-	Make sure to adjust for if you want either `Linear` or `Point` rendering.
+	Make sure to decide on whether you want `Linear` or `Point` rendering.
 
 	```
 	gfx.scale_back_buffer_filter=linear
 	gfx.scale_back_buffer_filter=point
 	```
 
-	When you're done, it should look like this:
+---
+### First launch
 
-<img src="/img/iidx11/config_args.png">
+!!! danger "If you have any issues running the game, refer to the [Troubleshooting](troubleshooting.md) page."
 
-### Final Steps and Setting up the Game
+#### BACKUP DATA
 
 !!! tip ""
-	We can now focus on starting the game and getting it running. Open `gamestart.bat` (if you kept the name as is)
 
-	You will be greeted by the initialization screen and shortly after this screen:
+	If you've followed all instructions correctly, you're now finally ready to launch the game!
 
-<img src="/img/iidx11/6.png">
+	**First plug your controller if you have one** and run :material-file:`gamestart.bat`.
 
-<img src="/img/iidx10/14.png">
+	If it's your first time running the game, you'll immediately be greeted with this screen.
+
+<img src="/img/iidx11/firstlaunch/1.png">
+
+<img src="/img/iidx11/firstlaunch/2.png">
 
 !!! tip ""
-	Hit your `Start` button to confirm to get to this screen:
+	Press your `Start` key to confirm to get to the next error message.
 
-<img src="/img/iidx10/15.png">
+#### CLOCK ERROR
+
+<img src="/img/iidx11/firstlaunch/3.png">
 
 !!! tip ""
-	Hit your `Start` button again to confirm. This will bring you into the games settings menu. From there, navigate to `CLOCK SETUP`. You can leave the date, no need to manually change it. Simply navigate to `SAVE AND EXIT`.
+	Press your `Start` key to confirm. This will bring you into it's service menu.
 	
-<img src="/img/iidx11/7.png">
+<img src="/img/iidx11/firstlaunch/4.png">
 
-<img src="/img/iidx11/8.png">
+!!! tip ""
+	Instructions on how to navigate the menu are shown at the bottom of the screen.
+
+	- Press `1` and `2` to go up and down.
+	- Press `6` to select/execute.
+	
+	Navigate to `CLOCK`. You do not need to manually change it. Navigate to `SAVE AND EXIT`.
+
+<img src="/img/iidx11/firstlaunch/5.png">
 
 !!! info "If you'd like to play offline, you can head straight to [Final Notes](#final-notes)"
 
-### Enabling e-AMUSEMENT for Online Play
+#### Enabling e-AMUSEMENT for Online Play
 
 !!! tip ""
-	From the games settings menu, naviate to `e-AMUSEMENT OPTIONS` and select it. This will bring you to `e-AMUSEMENT SETTINGS`. Select it aswell.
+	From the service menu, go to `NETWORK OPTIONS` then `e-AMUSEMENT SETTINGS`.
 	
-<img src="/img/iidx11/9.png">
+<img src="/img/iidx11/firstlaunch/6.png">
 
-<img src="/img/iidx11/10.png">
+<img src="/img/iidx11/firstlaunch/7.png">
 
 !!! tip ""
-	It'll bring you to this next screen, select it so that `e-AMUSEMENT` switches to `ON` and it will look like this:
+	It'll bring you to this screen, change it so that `e-AMUSEMENT` switches to `ON` and it will look like this:
 	
-<img src="/img/iidx11/11.png">
+<img src="/img/iidx11/firstlaunch/8.png">
 
-<img src="/img/iidx11/12.png">
+<img src="/img/iidx11/firstlaunch/9.png">
 
 !!! tip ""
-	We now have to change our `SHOP NAME SETTING` and `PREFECTURE` otherwise the game will throw errors at us.
+	We will need to set a `SHOP NAME SETTING` and change our `PREFECTURE` otherwise the game will throw errors at us.
 	
-	Start with the shop name, select it and change them to what ever you like. When you're done editing your shop name, navigate to `EXIT` and select it.
+<img src="/img/iidx11/firstlaunch/10.png">
-	
-<img src="/img/iidx11/13.png">
 
 !!! tip ""
-	For the prefecture change it once or how many times you'd like, it doesn't matter as long as it's not the default one.
 
-<img src="/img/iidx11/14.png">
+	- Name your shop to whatever you'd like. Instructions on how to navigate are at the bottom of the screen.
+	- Navigate to `EXIT` and select it.
+	- Change your prefecture once or how many times you'd like, it doesn't matter as long as it's not the default one.
+	
+<img src="/img/iidx11/firstlaunch/11.png">
 
 !!! tip ""
-	Once that is done, hit `SAVE AND EXIT`. The game will now give you a message, which translated means: 
+	Select `SAVE AND EXIT`. The game will now give you a message, which translated means: 
 	
 	`e-AMUSEMENT settings have been changed. Please turn the power off and on again.`
 	
-	So, close the game and open it up again.
+	So, close the game and open it again.
 	
-<img src="/img/iidx11/15.png">
+<img src="/img/iidx11/firstlaunch/12.png">
 	
+---	
 ### Final Notes
 
-!!! success "You're all done! From the service menu select `GAMEMODE` and the game should load ready to be played! Make sure to insert two credits by pressing your `SERVICE` key! Have fun!"
+!!! success "You're all done! From the service menu select `GAMEMODE` and the game should load ready to be played. Make sure to insert two credits by pressing your `SERVICE` key. Have fun!"
 
 !!! warning "Have any other errors?"
-	Check out the [Common Problems/Tips](problems.md) section to resolve any issues not seen in this guide to greater depth.
+	Check out the [Troubleshooting](troubleshooting.md) section.

mkdocs.yml

@@ -18,7 +18,7 @@ nav:
                   - "Common Problems/Tips": "games/iidx10/troubleshooting.md"
               - "IIDX 11 IIDX RED":
                   - "First Time Setup": "games/iidx11/setup.md"
-                  - "Common Problems/Tips": "games/iidx11/problems.md"
+                  - "Troubleshooting": "games/iidx11/troubleshooting.md"
               - "IIDX 12 HAPPY SKY":
                   - "First Time Setup": "games/iidx12/setup.md"
                   - "Common Problems/Tips": "games/iidx12/problems.md"