#ifndef _EA_EAAC_EATRAX_STREAMFILE_H_ #define _EA_EAAC_EATRAX_STREAMFILE_H_ #include "../streamfile.h" typedef struct { /* state */ off_t logical_offset; /* offset that corresponds to physical_offset */ off_t physical_offset; /* actual file offset */ size_t total_size; /* size of the resulting substream */ } eatrax_io_data; /* Reads skipping EA's block headers, so the resulting data is smaller than physical data, * and physical_offset is bigger than offset (ex. reads at offset = 0x00 could be at physical_offset = 0x10). * physical/logical_offset should always be at the start of a block and only advance when a block is fully done */ static size_t eatrax_io_read(STREAMFILE *streamfile, uint8_t *dest, off_t offset, size_t length, eatrax_io_data* data) { size_t total_read = 0; /* ignore bad reads */ if (offset < 0 || offset > data->total_size) { return 0; } /* previous offset: re-start as we can't map logical<>physical offsets * (kinda slow as it trashes buffers, but shouldn't happen often) */ if (offset < data->logical_offset) { data->physical_offset = 0x00; data->logical_offset = 0x00; } /* read doing one EA block at a time */ while (length > 0) { size_t to_read, bytes_read; off_t intrablock_offset, intradata_offset; uint32_t block_size, block_flag, data_size; block_flag = read_8bit(data->physical_offset+0x00,streamfile); block_size = read_32bitBE(data->physical_offset+0x00,streamfile) & 0x00FFFFFF; data_size = read_32bitBE(data->physical_offset+0x04,streamfile); /* typically block_size - 0x08 */ /* skip header block */ if (block_flag == 0x48) { data->physical_offset += block_size; continue; } /* stop on footer block */ if (block_flag == 0x45) { data->physical_offset += block_size; return total_read; } /* data block expected */ if (block_flag != 0x44) { return total_read; } /* requested offset is outside current block, try next */ if (offset >= data->logical_offset + data_size) { data->physical_offset += block_size; data->logical_offset += data_size; continue; } /* reads could fall in the middle of the block */ intradata_offset = offset - data->logical_offset; intrablock_offset = 0x08 + intradata_offset; /* clamp reads up to this block's end */ to_read = (data_size - intradata_offset); if (to_read > length) to_read = length; if (to_read == 0) return total_read; /* should never happen... */ /* finally read and move buffer/offsets */ bytes_read = read_streamfile(dest, data->physical_offset + intrablock_offset, to_read, streamfile); total_read += bytes_read; if (bytes_read != to_read) return total_read; /* couldn't read fully */ dest += bytes_read; offset += bytes_read; length -= bytes_read; /* block fully read, go next */ if (intradata_offset + bytes_read == data_size) { data->physical_offset += block_size; data->logical_offset += data_size; } } return total_read; } static size_t eatrax_io_size(STREAMFILE *streamfile, eatrax_io_data* data) { return data->total_size; } /* Prepares custom IO for EATrax, which is simply blocked ATRAC9 data, but blocks * may end in the middle of an ATRAC9 frame, so reads remove their headers */ static STREAMFILE* setup_eatrax_streamfile(STREAMFILE *streamFile, size_t total_size) { STREAMFILE *temp_streamFile = NULL, *new_streamFile = NULL; eatrax_io_data io_data = {0}; size_t io_data_size = sizeof(eatrax_io_data); io_data.total_size = total_size; /* setup subfile */ new_streamFile = open_wrap_streamfile(streamFile); if (!new_streamFile) goto fail; temp_streamFile = new_streamFile; new_streamFile = open_io_streamfile(temp_streamFile, &io_data,io_data_size, eatrax_io_read,eatrax_io_size); if (!new_streamFile) goto fail; temp_streamFile = new_streamFile; return temp_streamFile; fail: close_streamfile(temp_streamFile); return NULL; } #endif /* _EA_EAAC_STREAMFILE_H_ */