# Usage ## Needed extra files On Windows support for some codecs (Ogg Vorbis, MPEG audio, etc.) is done with external libraries, so you will need to put certain DLL files together. In the case of components like foobar2000 they are all bundled for convenience, while other components include them but must be installed manually. You can also get them here: https://github.com/vgmstream/vgmstream/tree/master/ext_libs or compile them manually, even (see tech docs). Put the following files somewhere Windows can find them: - `libvorbis.dll` - `libmpg123-0.dll` - `libg719_decode.dll` - `avcodec-vgmstream-58.dll` - `avformat-vgmstream-58.dll` - `avutil-vgmstream-56.dll` - `swresample-vgmstream-3.dll` - `libatrac9.dll` - `libcelt-0061.dll` - `libcelt-0110.dll` - `libspeex.dll` For command line (`test.exe`) and XMPlay this means in the directory with the main `.exe`, or possibly a directory in the PATH variable. For Winamp, the above `.dll` also go near main `winamp.exe`, but note that `in_vgmstream.dll` plugin itself goes in `Plugins`. On other OSs like Linux/Mac, libs need to be installed before compiling, then should be used automatically, though not all may enabled at the moment due to build scripts issues. ## Components ### test.exe/vgmstream-cli (command line decoder) *Windows*: unzip `test.exe` and follow the above instructions for installing needed extra files. `test.exe` is used for historical reasons, but you can call it `vgmstream-cli.exe`, anyway. *Others*: build instructions can be found in the [BUILD.md](BUILD.md) document (can be compiled with CMake/Make/autotools). Converts playable files to `.wav`. Typical usage would be: - `test.exe -o happy.wav happy.adx` to decode `happy.adx` to `happy.wav`. If command-line isn't your thing you can simply drag and drop one or multiple files to the executable to decode them as `(filename.ext).wav`. There are multiple options that alter how the file is converted, for example: - `test.exe -m file.adx`: print info but don't decode - `test.exe -i -o file_noloop.wav file.hca`: convert without looping - `test.exe -s 2 -F file.fsb`: write 2nd subsong + ending after 2.0 loops - `test.exe -l 3.0 -f 5.0 -d 3.0 file.wem`: 3 loops, 3s delay, 5s fade - `test.exe -o bgm_?f.wav file1.adx file2.adx`: convert multiple files to `bgm_(name).wav` Available commands are printed when run with no flags. Note that you can also achieve similar results for other plugins using TXTP, described later. Output filename in `-o` may use wildcards: - `?s`: sets current subsong (or 0 if format doesn't have subsongs) - `?0Ns`: same, but left pads subsong with up to `N` zeroes - `?n`: internal stream name, or input filename if format doesn't have name - `?f`: input filename For example `test.exe -s 2 -o ?04s_?n.wav file.fsb` could generate `0002_song1.wav`. Default output filename is `?f.wav`, or `?f#?s.wav` if you set subsongs (`-s/-S`). ### in_vgmstream (Winamp plugin) *Windows*: drop the `in_vgmstream.dll` in your Winamp Plugins directory, and follow the above instructions for installing needed extra files. *Others*: may be possible to use through *Wine* Once installed, supported files should be playable. There is a simple config menu to tweak some options too. If the *Preferences... > Plug-ins > Input* shows vgmstream as *"NOT LOADED"* that means extra DLL files aren't in the correct place. ### foo_input_vgmstream (foobar2000 plugin) *Windows*: every file should be installed automatically when opening the `.fb2k-component` bundle *Others*: may be possible to use through *Wine* A known quirk is that when loop options or tags change, playlist info won't refresh automatically. You need to manually refresh it by selecting songs and doing **shift + right click > Tagging > Reload info from file(s)**. ### xmp-vgmstream (XMPlay plugin) *Windows*: drop the `xmp-vgmstream.dll` in your XMPlay plugins directory, and follow the above instructions for installing the other files needed. *Others*: may be possible to use through *Wine* Note that this has less features compared to *in_vgmstream* and has no config. Since XMPlay supports Winamp plugins you may also use `in_vgmstream.dll` instead. Because the XMPlay MP3 decoder incorrectly tries to play some vgmstream extensions, you need to manually fix it by going to **options > plugins > input > vgmstream** and in the "priority filetypes" put: `ahx,asf,awc,ckd,fsb,genh,lwav,msf,p3d,rak,scd,txth,xvag` XMPlay cannot support vgmstream's type of mixed subsongs due to player limitations (with neither *xmp-vgmstream* nor *in_vgmstream* plugins), try using *TXTP* instead (explained below). ### Audacious plugin *Windows*: not possible at the moment. *Others*: needs to be manually built. Instructions can be found in [BUILD.md](BUILD.md) document in vgmstream's source code (can be done with CMake or autotools). ### vgmstream123 (command line player) *Windows/Linux*: needs to be manually built. Instructions can be found in the *[BUILD.md](BUILD.md)* document. On Windows it needs `libao.dll` and appropriate includes. Usage: `vgmstream123 [options] INFILE ...` The program is meant to be a simple stand-alone player, supporting playback of vgmstream files through libao. On Linux, files compressed with gzip/bzip2/xz also work, as identified by a `.gz/.bz2/.xz` extension. The file will be decompressed to a temp dir using the respective utility program (which must be installed and accessible) and then loaded. It also supports playlists, and will recognize a special extended-M3U tag specific to vgmstream of the following form: ``` #EXT-X-VGMSTREAM:LOOPCOUNT=2,FADETIME=10.0,FADEDELAY=0.0,STREAMINDEX=0 ``` (Any subset of these four parameters may appear in the line, in any order) When this "magic comment" appears in the playlist before a vgmstream-compatible file, the given parameters will be applied to the playback of said file. This makes it feasible to play vgmstream files directly instead of needing to make "arranged" WAV/MP3 conversions ahead of time. The tag syntax follows the conventions established in Apple's HTTP Live Streaming standard, whose docs discuss extending M3U with arbitrary tags. ## Special cases vgmstream aims to support most audio formats as-is, but some files require extra handling. ### Subsongs Certain container formats have multiple audio files, usually called "subsongs", often not meant to be extracted (no simple separation from container). By default vgmstream plays first subsong and reports total subsongs, if the format is able to contain them. Easiest to use would be the *foobar/winamp/Audacious* plugins, that are able to "unpack" those subsongs automatically into the playlist. With CLI tools, you can select a subsong using the `-s` flag followed by a number, for example: `text.exe -s 5 file.bank` or `vgmstream123 -s 5 file.bank`. Using *vgmstream-cli* you can convert multiple subsongs at once using the `-S` flag. **WARNING, MAY TAKE A LOT OF SPACE!** Some files have been observed to contain +20000 subsongs, so don't use this lightly. Remember to set an output name (`-o`) with subsong wildcards (or leave it alone for the defaults). - `test.exe -s 1 -S 100 file.bank`: writes from subsong 1 to subsong 100 - `test.exe -s 101 -S 0 file.bank`: writes from subsong 101 to max subsong (automatically changes 0 to max) - `test.exe -S 0 file.bank`: writes from subsong 1 to max subsong - `test.exe -s 1 -S 5 -o bgm.wav file.bank`: writes 5 subsongs, but all overwrite the same file = wrong. - `test.exe -s 1 -S 5 -o bgm_?02s.wav file.bank`: writes 5 subsongs, each named differently = correct. For other players without support, or to play only a few choice subsongs, you can create multiple `.txtp` (explained later) to select one, like `bgm.sxd#10.txtp` (plays subsong 10 in `bgm.sxd`). You can use this python script to autogenerate one `.txtp` per subsong: https://github.com/vgmstream/vgmstream/tree/master/cli/tools/txtp_maker.py Put in the same dir as test.exe/vgmstream_cli, then to drag-and-drop files with subsongs to `txtp_maker.py` (it has CLI options to control output too). ### Common and unknown extensions A few extensions that vgmstream supports clash with common ones. Since players like foobar or Winamp don't react well to that, they may be renamed to these "designated fake extensions" to make them playable through vgmstream. - `.aac` to `.laac` (tri-Ace games) - `.ac3` to `.lac3` (standard AC3) - `.aif` to `.laif` (standard Mac AIF, Asobo AIF, Ogg) - `.aiff/aifc` to `.laiffl/laifc` (standard Mac AIF) - `.asf` to `.lasf` (EA games, Argonaut ASF) - `.bin` to `.lbin` (various formats) - `.flac` to `.lflac` (standard FLAC) - `.mp2` to `.lmp2` (standard MP2) - `.mp3` to `.lmp3` (standard MP3) - `.mp4` to `.lmp4` (standard M4A) - `.mpc` to `.lmpc` (standard MPC) - `.ogg` to `.logg` (standard OGG) - `.opus` to `.lopus` (standard OPUS or Switch OPUS) - `.stm` to `.lstm` (Rockstar STM) - `.wav` to `.lwav` (standard WAV, various formats) - `.wma` to `.lwma` (standard WMA) - `.(any)` to `.vgmstream` (FFmpeg formats or TXTH) Command line tools don't have this restriction and will accept the original filename. The main advantage of renaming here is that vgmstream may use the file's internal loop info, or apply subtle fixes, but is also limited in some ways (like ignoring standard tags). `.vgmstream` is a catch-all extension that may work as a last resort to make a file playable. Some plugins have options that allow "*common extensions*" to be played, making any renaming unnecessary. You may need to adjust plugin priority in player's options first. Note that vgmstream also accepts certain extension-less files as-is too. Similarly, vgmstream has a curated list of known extensions, that plugins may take into account and ignore unknowns. Through *TXTH* you can make unknown files playable, but you also need to either rename or set plugin options to allow "*unknown extensions*" (or, preferably, report this new extension so it can be added to the known list). It's also possible to make a .txtp file that opens files with those common/unknown extensions as a way to force them into vgmstream without renaming. #### Related issues Also be aware that other plugins (not vgmstream) can tell the player they handle some extension, then not actually play it. This makes the file unplayable as vgmstream doesn't even get the chance to parse it, so you may need to disable the offending plugin or rename the file to the fake extension shown above (for example this may happen with `.asf` in foobar2000/Winamp, may be fixed in newer versions). When extracting from a bigfile, sometimes internal files don't have a proper extension. Those should be renamed to its correct one when possible, as the extractor program may guess wrong (like `.wav` instead of `.at3` or `.wem`). If there is no known extension, usually the header id/magic string may be used instead. #### Windows 10 folder bugs Windows 10's *Web Media Extensions* is a pre-installed package seems to read metadata from files like `.ogg`, `.opus`, `.flac` and so on when opening a folder. However it tends to noticeably slow down opening folders, also seems to crash and leave files unusable when reading unsupported formats like Switch Opus (rather than Ogg Opus). Renaming extensions should prevent those issues, or just uninstall those *Web Media Extension* better experience anyway. #### Fallout SFX .ACM Due to technical limitations, to play Fallout 1 SFX you need to rename them from `.acm` to `.wavc` (forces mono). ### Demuxed videos vgmstream also supports audio from videos, but usually must be demuxed (extracted without modification) first, since vgmstream doesn't attempt to support most of them (it does support a few video formats as-is though). The easiest way to do this is using *VGMToolBox*'s "Video Demultiplexer" option for common game video formats (`.bik`, `.vp6`, `.pss`, `.pam`, `.pmf`, `.usm`, `.xmv`, etc). For standard videos formats (`.avi`, `.mp4`, `.webm`, `.m2v`, `.ogv`, etc) not supported by VGMToolBox, FFmpeg binary may work: - `ffmpeg.exe -i (input file) -vn -acodec copy (output file)` Output extension may need to be adjusted to some appropriate audio file depending on the audio codec used. `ffprobe.exe` can list this codec, though the correct audio extension depends on the video itself (like `.avi` to `.wav/mp2/mp3` or `.ogv` to `.ogg`). Some games use custom video formats, demuxer scripts in `.bms` format may be found on the internet. ### Companion files Some formats have companion files with external info, that should be left together: - `.mus`: playlist with `.acm` - `.ogg.sli` or `.sli`: loop info for `.ogg` - `.ogg.sfl` : loop info for `.ogg` - `.opus.sli`: loop info for `.opus` - `.pos`: loop info for .wav - `.acb`: names for `.awb` - `.xsb`: names for `.xwb` Similarly some formats split header+body data in separate files, examples: - `.abk`+`.ast` - `.bnm`+`.apm/wav` - `.ktsl2asbin`+`.ktsl2stbin` - `.mih`+`.mib` - `.mpf`+`.mus` - `.pk`+`.spk` - `.sb0`+`.sp0` (or other numbers instead of `0`) - `.sgh`+`.sgd` - `.snr`+`.sns` - `.spt`+`.spd` - `.sts`+`.int` - `.xwh`+`.xwb` - `.xps`+`dat` - `.wav.str`+`.wav` - `.wav`+`.dcs` - `.wbh`+`.wbd` Both are needed to play and must be together. The usual rule is you open the bigger file (body), save a few formats where the smaller (header) file is opened instead for technical reasons (mainly some bank formats). Generally companion files are named the same (`bgm.awb`+`bgm.acb`), or internally point to another file `sfx.sb0`+`STREAM.sb0`. A few formats may have different names which are hardcoded instead of being listed in the header file (e.g. `.mpf+.mus`). In these cases, you can use *TXTM* format to specify associated companion files. See *Artificial files* below for more information. #### Dual stereo A special case of the above is "dual file stereo", where 2 similarly named mono files are fused together to make 1 stereo song. - `(file)_L.dsp`+`(file)_R.dsp` - `(file)-l.dsp`+`(file)-l.dsp` - `(file).L`+`(file).R` - `(file)_0.dsp`+`(file)_1.dsp` - `(file)_Left.dsp`+`(file)_Right.dsp` - `(file).v0`+`(file).v1` vgmstream automatically detects these pairs and makes a stereo song from `L` + `R`. You can open either `L` or `R` and you'll get the same stereo. If you rename one of the files the "pair" won't be found, and both will be played as mono. This is only done for a few choice formats (mainly `.dsp` and `.vag`) that commonly split audio like that, though. #### OS case sensitiveness When using OS with case sensitive filesystem (mainly Linux), a known issue with companion files is that vgmstream generally tries to find them using lowercase extension. This means that if the developer used uppercase instead (e.g. `bgm.ABK`+`bgm.AST`) loading will fail. It's technically complex to fix this, so for the time being the only option is renaming the companion extension to lowercase. A particularly nasty variation of that is that some formats load files by full name (e.g. `STREAM.SS0`), but sometimes the actual filename is in other case (`Stream.ss0`), and some files could even point to that with yet another case. You could try adding *symlinks* in various upper/lower/mixed cases to handle this, though only a few formats do this, mainly *Ubisoft* banks. Regular formats without companion files should work fine in upper/lowercase. For `.(ext).txth` files make sure `(ext)` matches case too. ### Decryption keys Certain formats have encrypted data, and need a key to decrypt. vgmstream will try to find the correct key from a list, but it can be provided by a companion file: - `.adx`: `.adxkey` (keystring, 8 byte keycode, or derived 6 byte start/mult/add key) - `.ahx`: `.ahxkey` (derived 6 byte start/mult/add key) - `.hca`: `.hcakey` (8 byte decryption key, a 64-bit number) - May be followed by 2 byte AWB scramble key for newer HCA - `.fsb`: `.fsbkey` (decryption key in hex, usually between 8-32 bytes) - `.bnsf`: `.bnsfkey` (decryption key, a string up to 24 chars) The key file can be `.(ext)key` (for the whole folder), or `(name).(ext)key" (for a single file). The format is made up to suit vgmstream. ### Artificial files In some cases a file only has raw data, while important header info (codec type, sample rate, channels, etc) is stored in the .exe or other hard to locate places. Or maybe the file plays normally, but has many layers at once that are silenced dynamically during gameplay, or looping metadata is stored externally. Cases like those can be supported using an artificial files with info vgmstream needs. Creation of these files is meant for advanced users, full docs can be found in vgmstream source. #### GENH A byte header placed right before the original data, modifying it. The resulting file must be `(name).genh`. Contains static header data. Programs like VGMToolbox can help to create *GENH*, but consider using *TXTH* instead, *GENH* is mostly deprecated. #### TXTH A text header placed in an external file. The TXTH must be named `.txth` or `.(ext).txth` (for the whole folder), or `(name.ext).txth` (for a single file). Contains dynamic text commands to read data from the original file, or static values. This allows vgmstream to play unsupported formats. *TXTH* is recommended over *GENH* as it's far easier to create and has many more functions, plus doesn't modify original data. Usage example (used when opening an unknown file named `bgm_01.pcm`): **.pcm.txth** ``` codec = PCM16LE channels = @0x04 #in the file, at offset 4 sample_rate = 48000 #hardcoded start_offset = 0x10 num_samples = data_size #auto ``` #### TXTP Text files with player configuration, named `(name).txtp`. For files that already play, sometimes games use them in various complex and non-standard ways, like playing multiple small songs as a single one, or using some channels as a section of the song. For those cases we can create a *TXTP* file to customize how vgmstream handles songs. Text inside `.txtp` can contain a list of filenames to play as one, a list of single-channel files to join as a single multichannel file, subsong index, per-file configurations like number of loops, remove unneeded channels, force looping, and many other features. Usage examples (open directly, name can be set freely): **bgm01-full.txtp** ``` # plays 2 files as a single one bgm01_intro.vag bgm01_loop.vag loop_mode = auto ``` **bgm-subsong10.txtp** ``` # plays subsong number 10 bgm.sxd#10 ``` **song01-looped.txtp** ``` # force looping an .mp3 from 10 seconds up to file end song02.mp3 #I 10.0 ``` **music01-demux2.txtp** ``` # plays channels 3 and 4 only, removes rest music01.bfstm #C3,4 ``` #### TXTM A text file named `.txtm` for some formats with companion files. It lists name combos determining which companion files to load for each main file. It is needed for formats where name combos are hardcoded, so vgmstream doesn't know which companion file(s) to load if its name doesn't match the main file. Note that companion file order is usually important. Usage example (used when opening files in the left part of the list): ``` # Harry Potter and the Chamber of Secrets (PS2) entrance.mpf: entrance.mus,entrance_o.mus willow.mpf: willow.mus,willow_o.mus ``` ``` # Metal Gear Solid: Snake Eater 3D (3DS) names for .awb bgm_2_streamfiles.awb: bgm_2.acb ``` ``` # Snack World (Switch) names for .awb (single .acb for all .awb, order matters) bgm.awb: bgm.acb bgm_DLC1.awb: bgm.acb ``` In rare cases you need to setup some extra flags ``` event_stream2.awb: event_stream2.acb event_stream2_dlc1.awb: event_stream2.acb event_stream2_dlc2.awb: event_stream2.acb event_stream2_dlc3.awb: event_stream2.acb # next "flag" allows both effect.acb and even_stream2.acb in the same file #@reset-pos effect.awb: effect.acb effect_dlc2.awb: effect.acb effect_dlc3.awb: effect.acb ``` ### Plugin conflicts Since vgmstream supports a huge amount of formats it's possibly that some of them are also supported in other plugins, and this sometimes causes conflicts. If a file that should isn't playing or looping, first make sure vgmstream is really opening it (should show "VGMSTREAM" somewhere in the file info), and try to remove a few other plugins. foobar's FFmpeg plugin and foo_adpcm are known to cause issues, but in modern versions (+1.4.x) you can configure plugin priority. In Audacious, vgmstream is set with slightly higher priority than FFmpeg, since it steals many formats that you normally want to loop (like `.adx`). However other plugins may set themselves higher, stealing formats instead. If current Audacious version doesn't let to change plugin priority you may need to disable some plugins (requires restart) or set priority on compile time. Particularly, mpg123 plugin may steal formats that aren't even MP3, making impossible for vgmstream to play them properly. ### Channel issues Some games layer a huge number of channels, that are disabled or downmixed during gameplay. The player may be unable to play those files (for example foobar can only play up to 8 channels, and Winamp depends on your sound card). For those files you can set the "downmix" option in vgmstream, that can reduce the number of channels to a playable amount. Note that this type of downmixing is very generic (not meant to be used when converting to other formats), channels are re-assigned and volumes modified in simplistic ways, since it can't guess how the file should be properly adjusted. Most likely it will sound a bit quieter than usual. You can also choose which channels to play using *TXTP*. For example, create a file named `song.adx#C1,2.txtp` to play only channels 1 and 2 from `song.adx`. *TXTP* also has command to set how files are downmixed. ### Average bitrate Note that vgmstream shows the "file bitrate" (counts all data) as opposed to "codec bitrate" (counts pure audio-only parts). This means bitrate may be slightly higher (or much higher, if file is bloated) than what encoder tools or other players may report. Calculating 100% correct codec bitrate usually needs manual reading of the whole file, slowing down opening files and needing extra effort by devs for minimal benefit, so it's not done. In some cases it's debatable what the codec bitrate is. Unlike MP3/AAC, 48kbps of raw Vorbis/Opus is unplayable/unusable unless it's packed into .ogg/wem/etc with extra data, that does increase final file size (thus bitrate) by some percent. Also, keep in mind video game audio bitrate isn't always a great indicator of quality. There are many factors in play like encoder, type of codec, sample rate and so on. A higher bitrate `.wav` can sound worse than a lower `.ogg` (like mono 22050hz `.wav` vs stereo 48000hz `.ogg`). ## Logged errors and unplayable supported files Some formats should normally play, but somehow don't. In those cases plugins can print vgmstream's error info to console (for example, `.fsb` with an unknown codec, `.hca/awb` with missing decryption key, bank has no audio, `.txth` is malformed, or `.wav` has an incorrectly ripped size). Console location and format depends on plugin: - *foobar2000*: found in *View menu > Console* - *Winamp*: open vgmstream's config (*Preferences... > Plug-ins > vgmstream* + *Configure* button) then press "Open Log" - *Audacious*: start with `audacious -V` from terminal - CLI utils: printed to stdout directly Only a few errors are printed ATM but may be helpful for more common cases. ## Tagging Some of vgmstream's plugins support simple read-only tagging via external files. Tags are loaded from a text/M3U-like file named *!tags.m3u* in the song folder. You don't have to load your songs with this M3U though, but you can (for pre-made order). The format is meant to be both a quick playlist and tags, but the tagfile itself just 'looks' like an M3U. you can load files manually or using other playlists and still get tags. Format is: ``` # ignored comment # $GLOBAL_COMMAND (extra features) # @GLOBAL_TAG text (applies all following tracks) # %LOCAL_TAG text (applies to next track only) filename1 # %LOCAL_TAG text (applies to next track only) filename2 ``` Accepted tags depend on the player (foobar: any; Winamp: see ATF config, Audacious: few standard ones), typically *ALBUM/ARTIST/TITLE/DISC/TRACK/COMPOSER/etc*, lower or uppercase, separated by one or multiple spaces. Repeated tags overwrite previous (ex.- may define *@COMPOSER* multiple times for "sections"). It only reads up to current *filename* though, so any *@TAG* below would be ignored. *GLOBAL_COMMAND*s currently can be: - *AUTOTRACK*: sets *%TRACK* tag automatically (1..N as files are encountered in the tag file). - *AUTOALBUM*: sets *%ALBUM* tag automatically using the containing dir as album. - *EXACTMATCH*: disables matching .txtp with regular files (explained below). Playlist title formatting (how tags are shown) should follow player's config, as vgmstream simply passes tags to the player. It's better to name the file lowercase `!tags.m3u` rather than `!Tags.m3u` (Windows accepts both but Linux is case sensitive). Note that with global tags you don't need to put all files inside. This would be a perfectly valid *!tags.m3u*: ``` # @ALBUM Game # @ARTIST Various Artists ``` ### Compatibility and non-English filenames and tags For best compatibility save `!tags.m3u` as *"ANSI"* or *"UTF-8" (with BOM)*. Tags and filenames using extended characters (like Japanese) should work, as long as `!tags.m3u` is saved as *"UTF-8 with BOM"* (UTF-8 is a way to define non-English characters, and BOM is a helper "byte-order" mark). Windows' *notepad* creates files *"with BOM"* when selecting UTF-8 encoding in *save as* dialog, or you may use other programs like *notepad++.exe* to convert them. More exactly, vgmstream needs the file saved in *UTF-8* to match tags and filenames (and ignores *BOM*), while foobar/Winamp won't understand UTF-8 *filenames* unless `.m3u` is saved *with BOM* (ignoring tags). Whereas if saved in what Windows calls "Unicode" (UTF-16) neither may work. Conversely, if your *filenames* only use English/ANSI characters you may ommit *BOM*, and if your tags are English only you may save the `.m3u` as ANSI. Or if you only use `!tags.m3u` for tags and not for opening files (for example opening them manually or with a `playlist.m3u8`) you won't need BOM either. Other players may not need BOM (or CRLF), but for consistency use them when dealing with non-ASCII names and tags. ### Tags with spaces Some players like foobar accept tags with spaces. To use them surround the tag with both characters. ``` # @GLOBAL TAG WITH SPACES@ text # ... # %LOCAL TAG WITH SPACES% text filename1 ``` As a side effect if text has @/% inside you also need them: `# @ALBUMARTIST@ Tom-H@ck` For interoperability with other plugins, consider using only common tags without spaces. ### ReplayGain foobar2000/Winamp can apply the following replaygain tags (if ReplayGain is enabled in preferences): ``` # %replaygain_track_gain N.NN dB # %replaygain_track_peak N.NNN # @replaygain_album_gain N.NN dB # @replaygain_album_peak N.NNN ``` ### TXTP matching To ease *TXTP* config, tags with plain files will match `.txtp` with config, and tags with `.txtp` config also match plain files: **!tags.m3u** ``` # @TITLE Title1 BGM01.adx #P 3.0.txtp # @TITLE Title2 BGM02.wav ``` **config.m3u** ``` # matches "Title1" (1:1) BGM01.adx #P 3.0.txtp # matches "Title1" (plain file matches config tag) BGM01.adx # matches "Title2" (config file matches plain tag) BGM02.wav #P 3.0.txtp # doesn't match anything (different config can't match) BGM01.adx #P 10.0.txtp ``` Since it matches when a tag is found, some cases that depend on order won't work. You can disable this feature manually then: **!tags.m3u** ``` # $EXACTMATCH # # %TITLE Title3 (without config) BGM01.adx # %TITLE Title3 (with config) BGM01.adx #I 1.0 90.0 .txtp ``` **config.m3u** ``` # Would match "Title3 (without config)" without "$EXACTMATCH", as it's found first # Could use "BGM01.adx.txtp" as first entry in !tags.m3u instead (different configs won't match) BGM01.adx #I 1.0 90.0 .txtp ``` ### Issues If your player isn't picking tags make sure vgmstream is detecting the song (as other plugins can steal its extensions, see above), `.m3u` is properly named and that filenames inside match the song filename. For Winamp you need to make sure *options > titles > advanced title formatting* checkbox is set and the format defined. When tags change behavior varies depending on player: - *Winamp*: should refresh tags when a different file is played. - *foobar2000*: needs to force refresh (for reasons outside vgmstream's control) - **select songs > shift + right click > Tagging > Reload info from file(s)**. - *Audacious*: files need to be re-added to the playlist Currently there is no tool to aid in the creation of these tags, but you can create a base `.m3u` and edit as a text file. You may try this python script to make the base file: https://raw.githubusercontent.com/bnnm/vgm-tools/master/py/tags-maker.py vgmstream's "m3u tagging" is meant to be simple to make and share (just a text file), easier to support in multiple players (rather than needing a custom plugin), allow OST-like ordering but also mixable with other `.m3u`, and be flexible enough to have commands. If you are not satisfied with vgmstream's tagging format, foobar2000 has other plugins (with write support) that may be of use: - m-TAGS: http://www.m-tags.org/ - foo_external_tags: https://foobar.hyv.fi/?view=foo_external_tags ## Virtual TXTP files Some of vgmstream's plugins (and CLI) allow you to use virtual `.txtp` files, that combined with playlists let you make quick song configs. Normally you can create a physical .txtp file that points to another file with config, and `.txtp` have a "mini-txtp" mode that configures files with only the filename. Instead of manually creating `.txtp` files you can put non-existing virtual `.txtp` in a `.m3u` playlist: ``` # playlist that opens subsongs directly without having to create .txtp # notice the full filename, then #(config), then ".txtp" (spaces are optional) bank_bgm_full.nub #s1 .txtp bank_bgm_full.nub #s10 .txtp ``` Combine with tagging (see above) for extra fun OST-like config. ``` # @ALBUM GOD HAND # play 1 loop, delay and do a longer fade # %TITLE Too Hot !! circus_a_mix_ver2.adx #l 1.0 #d 5.0 #f 15.0 .txtp # play 1 loop instead of the default 2 then fade with the song's internal fading # %TITLE Yet... Oh see mind boss2_3ningumi_ver6.adx #l 1.0 #F .txtp ... ``` You can also use it in CLI for quick access to some txtp-exclusive functions: ``` # force change sample rate to 22050 (don't forget to use " with spaces) test.exe -o btl_koopa1_44k_lp.wav "btl_koopa1_44k_lp.brstm #h22050.txtp" ``` Support for this feature is limited by player itself, as foobar and Winamp allow non-existent files referenced in a `.m3u`, while other players may filter them first. You can use this python script to autogenerate one `.txtp` per virtual-txtp: https://github.com/vgmstream/vgmstream/tree/master/cli/tools/txtp_dumper.py Drag and drop the `.m3u`, or any text file with .txtp (it has CLI options to control output too).