/* libmpg123: MPEG Audio Decoder library (version 1.4.3) copyright 1995-2007 by the mpg123 project - free software under the terms of the LGPL 2.1 see COPYING and AUTHORS files in distribution or http://mpg123.org */ #ifndef MPG123_LIB_H #define MPG123_LIB_H /** \file mpg123.h The header file for the libmpg123 MPEG Audio decoder */ /* These aren't actually in use... seems to work without using libtool. */ #ifdef BUILD_MPG123_DLL /* The dll exports. */ #define EXPORT __declspec(dllexport) #else #ifdef LINK_MPG123_DLL /* The exe imports. */ #define EXPORT __declspec(dllimport) #else /* Nothing on normal/UNIX builds */ #define EXPORT #endif #endif #include #include #ifdef __cplusplus extern "C" { #endif /** \defgroup mpg123_init mpg123 library and handle setup * * Functions to initialise and shutdown the mpg123 library and handles. * The parameters of handles have workable defaults, you only have to tune them when you want to tune something;-) * Tip: Use a RVA setting... * * @{ */ /** Opaque structure for the libmpg123 decoder handle. */ struct mpg123_handle_struct; /** Opaque structure for the libmpg123 decoder handle. * Most functions take a pointer to a mpg123_handle as first argument and operate on its data in an object-oriented manner. */ typedef struct mpg123_handle_struct mpg123_handle; /** Function to initialise the mpg123 library. * This function is not thread-safe. Call it exactly once before any other work with the library. * * \return MPG123_OK if successful, otherwise an error number. */ EXPORT int mpg123_init(void); /** Function to close down the mpg123 library. * This function is not thread-safe. Call it exactly once after any work with the library. */ EXPORT void mpg123_exit(void); /** Create a handle with optional choice of decoder (named by a string, see mpg123_decoders() or mpg123_supported_decoders()). * and optional retrieval of an error code to feed to mpg123_plain_strerror(). * Optional means: Any of or both the parameters may be NULL. * * \return Non-NULL pointer when successful. */ EXPORT mpg123_handle *mpg123_new(const char* decoder, int *error); /** Delete handle, mh is either a valid mpg123 handle or NULL. */ EXPORT void mpg123_delete(mpg123_handle *mh); /** Enumeration of the parameters types that it is possible to set/get. */ enum mpg123_parms { MPG123_VERBOSE, /**< set verbosity value for enabling messages to stderr, >= 0 makes sense */ MPG123_FLAGS, /**< set all flags, p.ex val = MPG123_GAPLESS|MPG123_MONO_MIX */ MPG123_ADD_FLAGS, /**< add some flags */ MPG123_FORCE_RATE, /**< when value > 0, force output rate to that value */ MPG123_DOWN_SAMPLE, /**< 0=native rate, 1=half rate, 2=quarter rate */ MPG123_RVA, /**< one of the RVA choices above */ MPG123_DOWNSPEED, /**< play a frame N times */ MPG123_UPSPEED, /**< play every Nth frame */ MPG123_START_FRAME, /**< start with this frame (skip frames before that) */ MPG123_DECODE_FRAMES, /**< decode only this number of frames */ MPG123_ICY_INTERVAL, /**< stream contains ICY metadata with this interval */ MPG123_OUTSCALE, /**< the scale for output samples (amplitude) */ MPG123_TIMEOUT, /**< timeout for reading from a stream (not supported on win32) */ MPG123_REMOVE_FLAGS, /**< remove some flags (inverse of MPG123_ADD_FLAGS) */ MPG123_RESYNC_LIMIT /**< Try resync on frame parsing for that many bytes or until end of stream (<0). */ }; /** Flag bits for MPG123_FLAGS, use the usual binary or to combine. */ enum mpg123_param_flags { MPG123_FORCE_MONO = 0x7 /**< 0111 Force some mono mode: This is a test bitmask for seeing if any mono forcing is active. */ ,MPG123_MONO_LEFT = 0x1 /**< 0001 Force playback of left channel only. */ ,MPG123_MONO_RIGHT = 0x2 /**< 0010 Force playback of right channel only. */ ,MPG123_MONO_MIX = 0x4 /**< 0100 Force playback of mixed mono. */ ,MPG123_FORCE_STEREO = 0x8 /**< 1000 Force stereo output. */ ,MPG123_FORCE_8BIT = 0x10 /**< 00010000 Force 8bit formats. */ ,MPG123_QUIET = 0x20 /**< 00100000 Suppress any printouts (overrules verbose). */ ,MPG123_GAPLESS = 0x40 /**< 01000000 Enable gapless decoding (default on if libmpg123 has support). */ ,MPG123_NO_RESYNC = 0x80 /**< 10000000 Disable resync stream after error. */ ,MPG123_SEEKBUFFER = 0x100 /**< 000100000000 Enable small buffer on non-seekable streams to allow some peek-ahead (for better MPEG sync). */ }; /** choices for MPG123_RVA */ enum mpg123_param_rva { MPG123_RVA_OFF = 0 /**< RVA disabled (default). */ ,MPG123_RVA_MIX = 1 /**< Use mix/track/radio gain. */ ,MPG123_RVA_ALBUM = 2 /**< Use album/audiophile gain */ ,MPG123_RVA_MAX = MPG123_RVA_ALBUM /**< The maximum RVA code, may increase in future. */ }; /* TODO: Assess the possibilities and troubles of changing parameters during playback. */ /** Set a specific parameter, for a specific mpg123_handle, using a parameter * type key chosen from the mpg123_parms enumeration, to the specified value. */ EXPORT int mpg123_param(mpg123_handle *mh, enum mpg123_parms type, long value, double fvalue); /** Get a specific parameter, for a specific mpg123_handle. * See the mpg123_parms enumeration for a list of available parameters. */ EXPORT int mpg123_getparam(mpg123_handle *mh, enum mpg123_parms type, long *val, double *fval); /* @} */ /** \defgroup mpg123_error mpg123 error handling * * Functions to get text version of the error numbers and an enumeration * of the error codes returned by libmpg123. * * Most functions operating on a mpg123_handle simply return MPG123_OK on success and MPG123_ERR on failure (setting the internal error variable of the handle to the specific error code). * Decoding/seek functions may also return message codes MPG123_DONE, MPG123_NEW_FORMAT and MPG123_NEED_MORE. * The positive range of return values is used for "useful" values when appropriate. * * @{ */ /** Enumeration of the message and error codes and returned by libmpg123 functions. */ enum mpg123_errors { MPG123_DONE=-12, /**< Message: Track ended. */ MPG123_NEW_FORMAT=-11, /**< Message: Output format will be different on next call. */ MPG123_NEED_MORE=-10, /**< Message: For feed reader: "Feed me more!" */ MPG123_ERR=-1, /**< Generic Error */ MPG123_OK=0, /**< Success */ MPG123_BAD_OUTFORMAT, /**< Unable to set up output format! */ MPG123_BAD_CHANNEL, /**< Invalid channel number specified. */ MPG123_BAD_RATE, /**< Invalid sample rate specified. */ MPG123_ERR_16TO8TABLE, /**< Unable to allocate memory for 16 to 8 converter table! */ MPG123_BAD_PARAM, /**< Bad parameter id! */ MPG123_BAD_BUFFER, /**< Bad buffer given -- invalid pointer or too small size. */ MPG123_OUT_OF_MEM, /**< Out of memory -- some malloc() failed. */ MPG123_NOT_INITIALIZED, /**< You didn't initialize the library! */ MPG123_BAD_DECODER, /**< Invalid decoder choice. */ MPG123_BAD_HANDLE, /**< Invalid mpg123 handle. */ MPG123_NO_BUFFERS, /**< Unable to initialize frame buffers (out of memory?). */ MPG123_BAD_RVA, /**< Invalid RVA mode. */ MPG123_NO_GAPLESS, /**< This build doesn't support gapless decoding. */ MPG123_NO_SPACE, /**< Not enough buffer space. */ MPG123_BAD_TYPES, /**< Incompatible numeric data types. */ MPG123_BAD_BAND, /**< Bad equalizer band. */ MPG123_ERR_NULL, /**< Null pointer given where valid storage address needed. */ MPG123_ERR_READER, /**< Error reading the stream. */ MPG123_NO_SEEK_FROM_END,/**< Cannot seek from end (end is not known). */ MPG123_BAD_WHENCE, /**< Invalid 'whence' for seek function.*/ MPG123_NO_TIMEOUT, /**< Build does not support stream timeouts. */ MPG123_BAD_FILE, /**< File access error. */ MPG123_NO_SEEK, /**< Seek not supported by stream. */ MPG123_NO_READER, /**< No stream opened. */ MPG123_BAD_PARS, /**< Bad parameter handle. */ MPG123_BAD_INDEX_PAR, /**< Bad parameters to mpg123_index() */ MPG123_OUT_OF_SYNC, /**< Lost track in bytestream and did not try to resync. */ MPG123_RESYNC_FAIL /**< Resync failed to find valid MPEG data. */ }; /** Return a string describing that error errcode means. */ EXPORT const char* mpg123_plain_strerror(int errcode); /** Give string describing what error has occured in the context of handle mh. * When a function operating on an mpg123 handle returns MPG123_ERR, you should check for the actual reason via * char *errmsg = mpg123_strerror(mh) * This function will catch mh == NULL and return the message for MPG123_BAD_HANDLE. */ EXPORT const char* mpg123_strerror(mpg123_handle *mh); /** Return the plain errcode intead of a string. */ EXPORT int mpg123_errcode(mpg123_handle *mh); /*@}*/ /** \defgroup mpg123_decoder mpg123 decoder selection * * Functions to list and select the available decoders. * Perhaps the most prominent feature of mpg123: You have several (optimized) decoders to choose from (on x86 and PPC (MacOS) systems, that is). * * @{ */ /** Return a NULL-terminated array of generally available decoder names (plain 8bit ASCII). */ EXPORT char **mpg123_decoders(); /** Return a NULL-terminated array of the decoders supported by the CPU (plain 8bit ASCII). */ EXPORT char **mpg123_supported_decoders(); /** Set the chosen decoder to 'decoder_name' */ EXPORT int mpg123_decoder(mpg123_handle *mh, const char* decoder_name); /*@}*/ /** \defgroup mpg123_output mpg123 output audio format * * Functions to get and select the format of the decoded audio. * * @{ */ /** 16 or 8 bits, signed or unsigned... all flags fit into 8 bits, float/double are not yet standard and special anyway */ enum mpg123_enc_enum { MPG123_ENC_16 = 0x40 /**< 0100 0000 Some 16 bit encoding... */ ,MPG123_ENC_SIGNED = 0x80 /**< 1000 0000 Some signed encoding... */ ,MPG123_ENC_8 = 0x0f /**< 0000 1111 Some 8 bit encoding... */ ,MPG123_ENC_SIGNED_16 = (MPG123_ENC_16|MPG123_ENC_SIGNED|0x10) /**< 1101 0000 signed 16 bit */ ,MPG123_ENC_UNSIGNED_16 = (MPG123_ENC_16|0x20) /**< 0110 0000 unsigned 16 bit*/ ,MPG123_ENC_UNSIGNED_8 = 0x01 /**< 0000 0001 unsigned 8 bit*/ ,MPG123_ENC_SIGNED_8 = (MPG123_ENC_SIGNED|0x02) /**< 1000 0010 signed 8 bit*/ ,MPG123_ENC_ULAW_8 = 0x04 /**< 0000 0100 ulaw 8 bit*/ ,MPG123_ENC_ALAW_8 = 0x08 /**< 0000 1000 alaw 8 bit */ ,MPG123_ENC_ANY = ( MPG123_ENC_SIGNED_16 | MPG123_ENC_UNSIGNED_16 | MPG123_ENC_UNSIGNED_8 | MPG123_ENC_SIGNED_8 | MPG123_ENC_ULAW_8 | MPG123_ENC_ALAW_8 ) /**< any encoding */ }; /** They can be combined into one number (3) to indicate mono and stereo... */ enum mpg123_channelcount { MPG123_MONO = 1 ,MPG123_STEREO = 2 }; /** An array of supported standard sample rates * These are possible native sample rates of MPEG audio files. * You can still force mpg123 to resample to a different one, but by default you will only get audio in one of these samplings. * \param list Store a pointer to the sample rates array there. * \param number Store the number of sample rates there. */ EXPORT void mpg123_rates(const long **list, size_t *number); /** An array of supported audio encodings. * An audio encoding is a logic OR of members of mpg123_enc_enum. * \param list Store a pointer to the encodings array there. * \param number Store the number of encodings there. */ EXPORT void mpg123_encodings(const int **list, size_t *number); /** Configure a mpg123 handle to accept no output format at all, * use before specifying supported formats with mpg123_format */ EXPORT int mpg123_format_none(mpg123_handle *mh); /** Configure mpg123 handle to accept all formats * (also any custom rate you may set) -- this is default. */ EXPORT int mpg123_format_all(mpg123_handle *mh); /** Set the audio format support of a mpg123_handle in detail: * \param mh audio decoder handle * \param rate The sample rate value (in Hertz). * \param channels A combination of MPG123_STEREO and MPG123_MONO. * \param encodings A combination of accepted encodings for rate and channels, p.ex MPG123_ENC_SIGNED16 | MPG123_ENC_ULAW_8 (or 0 for no support). * \return MPG123_OK on success, MPG123_ERR if there was an error. */ EXPORT int mpg123_format(mpg123_handle *mh, long rate, int channels, int encodings); /** Check to see if a specific format at a specific rate is supported * by mpg123_handle. * \return 0 for no support (that includes invalid parameters), MPG123_STEREO, * MPG123_MONO or MPG123_STEREO|MPG123_MONO. */ EXPORT int mpg123_format_support(mpg123_handle *mh, long rate, int encoding); /** Get the current output format written to the addresses givenr. */ EXPORT int mpg123_getformat(mpg123_handle *mh, long *rate, int *channels, int *encoding); /*@}*/ /** \defgroup mpg123_input mpg123 file input and decoding * * Functions for input bitstream and decoding operations. * * @{ */ /* reading samples / triggering decoding, possible return values: */ /** Enumeration of the error codes returned by libmpg123 functions. */ /** Open and prepare to decode the specified file by filesystem path. * This does not open HTTP urls; libmpg123 contains no networking code. * If you want to decode internet streams, use mpg123_open_fd() or mpg123_open_feed(). */ EXPORT int mpg123_open(mpg123_handle *mh, char *path); /** Use an already opened file descriptor as the bitstream input * mpg123_close() will _not_ close the file descriptor. */ EXPORT int mpg123_open_fd(mpg123_handle *mh, int fd); /** Open a new bitstream and prepare for direct feeding * This works together with mpg123_decode(); you are responsible for reading and feeding the input bitstream. */ EXPORT int mpg123_open_feed(mpg123_handle *mh); /** Closes the source, if libmpg123 opened it. */ EXPORT int mpg123_close(mpg123_handle *mh); /** Read from stream and decode up to outmemsize bytes. * \param outmemory address of output buffer to write to * \param outmemsize maximum number of bytes to write * \param done address to store the number of actually decoded bytes to * \return error/message code (watch out for MPG123_DONE and friends!) */ EXPORT int mpg123_read(mpg123_handle *mh, unsigned char *outmemory, size_t outmemsize, size_t *done); /** Decode MPEG Audio from inmemory to outmemory. * This is very close to a drop-in replacement for old mpglib. * When you give zero-sized output buffer the input will be parsed until * decoded data is available. This enables you to get MPG123_NEW_FORMAT (and query it) * without taking decoded data. * \param inmemory input buffer * \param inmemsize number of input bytes * \param outmemory output buffer * \param outmemsize maximum number of output bytes * \param done address to store the number of actually decoded bytes to * \return error/message code (watch out especially for MPG123_NEED_MORE) */ EXPORT int mpg123_decode(mpg123_handle *mh, unsigned char *inmemory, size_t inmemsize, unsigned char *outmemory, size_t outmemsize, size_t *done); /** Decode next MPEG frame to internal buffer * or read a frame and return after setting a new format. * \param num current frame offset gets stored there * \param audio This pointer is set to the internal buffer to read the decoded audio from. * \param bytes number of output bytes ready in the buffer */ EXPORT int mpg123_decode_frame(mpg123_handle *mh, off_t *num, unsigned char **audio, size_t *bytes); /*@}*/ /** \defgroup mpg123_seek mpg123 position and seeking * * Functions querying and manipulating position in the decoded audio bitstream. * The position is measured in decoded audio samples, or MPEG frame offset for the specific functions. * If gapless code is in effect, the positions are adjusted to compensate the skipped padding/delay - meaning, you should not care about that at all and just use the position defined for the samples you get out of the decoder;-) * The general usage is modelled after stdlib's ftell() and fseek(). * Especially, the whence parameter for the seek functions has the same meaning as the one for fseek() and needs the same constants from stdlib.h: * - SEEK_SET: set position to (or near to) specified offset * - SEEK_CUR: change position by offset from now * - SEEK_END: set position to offset from end * * Note that sample-afccurate seek only works when gapless support has been enabled at compile time; seek is frame-accurate otherwise. * Also, seeking is not guaranteed to work for all streams (underlying stream may not support it). * * @{ */ /** Returns the current position in samples. * On the next read, you'd get that sample. */ EXPORT off_t mpg123_tell(mpg123_handle *mh); /** Returns the frame number that the next read will give you data from. */ EXPORT off_t mpg123_tellframe(mpg123_handle *mh); /** Seek to a desired sample offset. * Set whence to SEEK_SET, SEEK_CUR or SEEK_END. * \return The resulting offset >= 0 or error/message code */ EXPORT off_t mpg123_seek(mpg123_handle *mh, off_t sampleoff, int whence); /** Seek to a desired sample offset in data feeding mode. * This just prepares things to be right only if you ensure that the next chunk of input data will be from input_offset byte position. * \param input_offset The position it expects to be at the * next time data is fed to mpg123_decode(). * \return The resulting offset >= 0 or error/message code */ EXPORT off_t mpg123_feedseek(mpg123_handle *mh, off_t sampleoff, int whence, off_t *input_offset); /** Seek to a desired MPEG frame index. * Set whence to SEEK_SET, SEEK_CUR or SEEK_END. * \return The resulting offset >= 0 or error/message code */ EXPORT off_t mpg123_seek_frame(mpg123_handle *mh, off_t frameoff, int whence); /** Return a MPEG frame offset corresponding to an offset in seconds. * This assumes that the samples per frame do not change in the file/stream, which is a good assumption for any sane file/stream only. * \return frame offset >= 0 or error/message code */ EXPORT off_t mpg123_timeframe(mpg123_handle *mh, double sec); /** Give access to the frame index table that is managed for seeking. * You are asked not to modify the values... unless you are really aware of what you are doing. * \param offsets pointer to the index array * \param step one index byte offset advances this many MPEG frames * \param fill number of recorded index offsets; size of the array */ EXPORT int mpg123_index(mpg123_handle *mh, off_t **offsets, off_t *step, size_t *fill); /** Get information about current and remaining frames/seconds. * WARNING: This function is there because of special usage by standalone mpg123 and may be removed in the final version of libmpg123! * You provide an offset (in frames) from now and a number of output bytes * served by libmpg123 but not yet played. You get the projected current frame * and seconds, as well as the remaining frames/seconds. This does _not_ care * about skipped samples due to gapless playback. */ EXPORT int mpg123_position( mpg123_handle *mh, off_t frame_offset, off_t buffered_bytes, off_t *current_frame, off_t *frames_left, double *current_seconds, double *seconds_left); /*@}*/ /** \defgroup mpg123_voleq mpg123 volume and equalizer * * @{ */ enum mpg123_channels { MPG123_LEFT=0x1, /**< The Left Channel. */ MPG123_RIGHT=0x2 /**< The Right Channel. */ }; /** Set the 32 Band Audio Equalizer settings. * \param channel Can be MPG123_LEFT, MPG123_RIGHT or MPG123_LEFT|MPG123_RIGHT for both. * \param band The equaliser band to change (from 0 to 31) * \param val The (linear) adjustment factor. */ EXPORT int mpg123_eq(mpg123_handle *mh, enum mpg123_channels channel, int band, double val); /** Reset the 32 Band Audio Equalizer settings to flat */ EXPORT int mpg123_reset_eq(mpg123_handle *mh); /** Set the absolute output volume including the RVA setting, * vol<0 just applies (a possibly changed) RVA setting. */ EXPORT int mpg123_volume(mpg123_handle *mh, double vol); /** Adjust output volume including the RVA setting by chosen amount */ EXPORT int mpg123_volume_change(mpg123_handle *mh, double change); /** Return current volume setting, the actual value due to RVA, and the RVA * adjustment itself. It's all as double float value to abstract the sample * format. The volume values are linear factors / amplitudes (not percent) * and the RVA value is in decibels. */ EXPORT int mpg123_getvolume(mpg123_handle *mh, double *base, double *really, double *rva_db); /* TODO: Set some preamp in addition / to replace internal RVA handling? */ /*@}*/ /** \defgroup mpg123_status mpg123 status and information * * @{ */ /** Enumeration of the mode types of Variable Bitrate */ enum mpg123_vbr { MPG123_CBR=0, /**< Constant Bitrate Mode (default) */ MPG123_VBR, /**< Variable Bitrate Mode */ MPG123_ABR /**< Average Bitrate Mode */ }; /** Enumeration of the MPEG Versions */ enum mpg123_version { MPG123_1_0=0, /**< MPEG Version 1.0 */ MPG123_2_0, /**< MPEG Version 2.0 */ MPG123_2_5 /**< MPEG Version 2.5 */ }; /** Enumeration of the MPEG Audio mode. * Only the mono mode has 1 channel, the others have 2 channels. */ enum mpg123_mode { MPG123_M_STEREO=0, /**< Standard Stereo. */ MPG123_M_JOINT, /**< Joint Stereo. */ MPG123_M_DUAL, /**< Dual Channel. */ MPG123_M_MONO /**< Single Channel. */ }; /** Enumeration of the MPEG Audio flag bits */ enum mpg123_flags { MPG123_CRC=0x1, /**< The bitstream is error protected using 16-bit CRC. */ MPG123_COPYRIGHT=0x2, /**< The bitstream is copyrighted. */ MPG123_PRIVATE=0x4, /**< The private bit has been set. */ MPG123_ORIGINAL=0x8 /**< The bitstream is an original, not a copy. */ }; /** Data structure for storing information about a frame of MPEG Audio */ struct mpg123_frameinfo { enum mpg123_version version; /**< The MPEG version (1.0/2.0/2.5). */ int layer; /**< The MPEG Audio Layer (MP1/MP2/MP3). */ long rate; /**< The sampling rate in Hz. */ enum mpg123_mode mode; /**< The audio mode (Mono, Stereo, Joint-stero, Dual Channel). */ int mode_ext; /**< The mode extension bit flag. */ int framesize; /**< The size of the frame (in bytes). */ enum mpg123_flags flags; /**< MPEG Audio flag bits. */ int emphasis; /**< The emphasis type. */ int bitrate; /**< Bitrate of the frame (kbps). */ int abr_rate; /**< The target average bitrate. */ enum mpg123_vbr vbr; /**< The VBR mode. */ }; /** Get frame information about the MPEG audio bitstream and store it in a mpg123_frameinfo structure. */ EXPORT int mpg123_info(mpg123_handle *mh, struct mpg123_frameinfo *mi); /** Get the safe output buffer size for all cases (when you want to replace the internal buffer) */ EXPORT size_t mpg123_safe_buffer(); /** Make a full parsing scan of each frame in the file. ID3 tags are found. An accurate length * value is stored. Seek index will be filled. A seek back to current position * is performed. At all, this function refuses work when stream is * not seekable. * \return MPG123_OK or MPG123_ERR. */ EXPORT int mpg123_scan(mpg123_handle *mh); /** Return, if possible, the full (expected) length of current track in samples. */ EXPORT off_t mpg123_length(mpg123_handle *mh); /** Returns the time (seconds) per frame; <0 is error. */ EXPORT double mpg123_tpf(mpg123_handle *mh); /** Get and reset the clip count. */ EXPORT long mpg123_clip(mpg123_handle *mh); /*@}*/ /** \defgroup mpg123_metadata mpg123 metadata handling * * Functions to retrieve the metadata from MPEG Audio files and streams. * Also includes string handling functions. * * @{ */ /** Data structure for storing strings in a safer way than a standard C-String. * Can also hold a number of null-terminated strings. */ typedef struct { char* p; /**< pointer to the string data */ size_t size; /**< raw number of bytes allocated */ size_t fill; /**< number of used bytes (including closing zero byte) */ } mpg123_string; /** Create and allocate memory for a new mpg123_string */ EXPORT void mpg123_init_string(mpg123_string* sb); /** Free-up mempory for an existing mpg123_string */ EXPORT void mpg123_free_string(mpg123_string* sb); /** Change the size of a mpg123_string * \return 0 on error, 1 on success */ EXPORT int mpg123_resize_string(mpg123_string* sb, size_t news); /** Copy the contents of one mpg123_string string to another. * \return 0 on error, 1 on success */ EXPORT int mpg123_copy_string(mpg123_string* from, mpg123_string* to); /** Append a C-String to an mpg123_string * \return 0 on error, 1 on success */ EXPORT int mpg123_add_string(mpg123_string* sb, char* stuff); /** Set the conents of a mpg123_string to a C-String * \return 0 on error, 1 on success */ EXPORT int mpg123_set_string(mpg123_string* sb, char* stuff); /** Sub data structure for ID3v2, for storing various text fields (including comments). * This is for ID3v2 COMM, TXXX and all the other text fields. * Only COMM and TXXX have a description, only COMM has a language. * You should consult the ID3v2 specification for the use of the various text fields ("frames" in ID3v2 documentation, I use "fields" here to separate from MPEG frames). */ typedef struct { char lang[3]; /**< Three-letter language code (not terminated). */ char id[4]; /**< The ID3v2 text field id, like TALB, TPE2, ... (4 characters, no string termination). */ mpg123_string description; /**< Empty for the generic comment... */ mpg123_string text; /**< ... */ } mpg123_text; /** Data structure for storing IDV3v2 tags. * This structure is not a direct binary mapping with the file contents. * The ID3v2 text frames are allowed to contain multiple strings. * So check for null bytes until you reach the mpg123_string fill. * All text is encoded in UTF-8. */ typedef struct { unsigned char version; /**< 3 or 4 for ID3v2.3 or ID3v2.4. */ mpg123_string *title; /**< Title string (pointer into text_list). */ mpg123_string *artist; /**< Artist string (pointer into text_list). */ mpg123_string *album; /**< Album string (pointer into text_list). */ mpg123_string *year; /**< The year as a string (pointer into text_list). */ mpg123_string *genre; /**< Genre String (pointer into text_list). The genre string(s) may very well need postprocessing, esp. for ID3v2.3. */ mpg123_string *comment; /**< Pointer to last encountered comment text with empty description. */ /* Encountered ID3v2 fields are appended to these lists. There can be multiple occurences, the pointers above always point to the last encountered data. */ mpg123_text *comment_list; /**< Array of comments. */ size_t comments; /**< Number of comments. */ mpg123_text *text; /**< Array of ID3v2 text fields */ size_t texts; /**< Numer of text fields. */ mpg123_text *extra; /**< The array of extra (TXXX) fields. */ size_t extras; /**< Number of extra text (TXXX) fields. */ } mpg123_id3v2; /** Data structure for ID3v1 tags (the last 128 bytes of a file). * Don't take anything for granted (like string termination)! * Also note the change ID3v1.1 did: comment[28] = 0; comment[19] = track_number * It is your task to support ID3v1 only or ID3v1.1 ...*/ typedef struct { char tag[3]; /**< Always the string "TAG", the classic intro. */ char title[30]; /**< Title string. */ char artist[30]; /**< Artist string. */ char album[30]; /**< Album string. */ char year[4]; /**< Year string. */ char comment[30]; /**< Comment string. */ unsigned char genre; /**< Genre index. */ } mpg123_id3v1; #define MPG123_ID3 0x3 /**< 0011 There is some ID3 info. Also matches 0010 or NEW_ID3. */ #define MPG123_NEW_ID3 0x1 /**< 0001 There is ID3 info that changed since last call to mpg123_id3. */ #define MPG123_ICY 0xc /**< 1100 There is some ICY info. Also matches 0100 or NEW_ICY.*/ #define MPG123_NEW_ICY 0x4 /**< 0100 There is ICY info that changed since last call to mpg123_icy. */ /** Query if there is (new) meta info, be it ID3 or ICY (or something new in future). The check function returns a combination of flags. */ EXPORT int mpg123_meta_check(mpg123_handle *mh); /* On error (no valid handle) just 0 is returned. */ /** Point v1 and v2 to existing data structures wich may change on any next read/decode function call. * v1 and/or v2 can be set to NULL when there is no corresponding data. * \return Return value is MPG123_OK or MPG123_ERR, */ EXPORT int mpg123_id3(mpg123_handle *mh, mpg123_id3v1 **v1, mpg123_id3v2 **v2); /** Point icy_meta to existing data structure wich may change on any next read/decode function call. * \return Return value is MPG123_OK or MPG123_ERR, */ EXPORT int mpg123_icy(mpg123_handle *mh, char **icy_meta); /* same for ICY meta string */ /* @} */ /** \defgroup mpg123_advpar mpg123 advanced parameter API * * Direct access to a parameter set without full handle around it. * Possible uses: * - Influence behaviour of library _during_ initialization of handle (MPG123_VERBOSE). * - Use one set of parameters for multiple handles. * * The functions for handling mpg123_pars (mpg123_par() and mpg123_fmt() * family) directly return a fully qualified mpg123 error code, the ones * operating on full handles normally MPG123_OK or MPG123_ERR, storing the * specific error code itseld inside the handle. * * @{ */ /** Opaque structure for the libmpg123 decoder parameters. */ struct mpg123_pars_struct; /** Opaque structure for the libmpg123 decoder parameters. */ typedef struct mpg123_pars_struct mpg123_pars; /** Create a handle with preset parameters. */ EXPORT mpg123_handle *mpg123_parnew(mpg123_pars *mp, const char* decoder, int *error); /** Allocate memory for and return a pointer to a new mpg123_pars */ EXPORT mpg123_pars *mpg123_new_pars(int *error); /** Delete and free up memory used by a mpg123_pars data structure */ EXPORT void mpg123_delete_pars(mpg123_pars* mp); /** Configure mpg123 parameters to accept no output format at all, * use before specifying supported formats with mpg123_format */ EXPORT int mpg123_fmt_none(mpg123_pars *mp); /** Configure mpg123 parameters to accept all formats * (also any custom rate you may set) -- this is default. */ EXPORT int mpg123_fmt_all(mpg123_pars *mp); /** Set the audio format support of a mpg123_pars in detail: \param rate The sample rate value (in Hertz). \param channels A combination of MPG123_STEREO and MPG123_MONO. \param encodings A combination of accepted encodings for rate and channels, p.ex MPG123_ENC_SIGNED16|MPG123_ENC_ULAW_8 (or 0 for no support). \return 0 on success, -1 if there was an error. / */ EXPORT int mpg123_fmt(mpg123_pars *mh, long rate, int channels, int encodings); /* 0 is good, -1 is error */ /** Check to see if a specific format at a specific rate is supported * by mpg123_pars. * \return 0 for no support (that includes invalid parameters), MPG123_STEREO, * MPG123_MONO or MPG123_STEREO|MPG123_MONO. */ EXPORT int mpg123_fmt_support(mpg123_pars *mh, long rate, int encoding); /** Set a specific parameter, for a specific mpg123_pars, using a parameter * type key chosen from the mpg123_parms enumeration, to the specified value. */ EXPORT int mpg123_par(mpg123_pars *mp, enum mpg123_parms type, long value, double fvalue); /** Get a specific parameter, for a specific mpg123_pars. * See the mpg123_parms enumeration for a list of available parameters. */ EXPORT int mpg123_getpar(mpg123_pars *mp, enum mpg123_parms type, long *val, double *fval); /* @} */ /** \defgroup mpg123_lowio mpg123 low level I/O * You may want to do tricky stuff with I/O that does not work with mpg123's default file access or you want to make it decode into your own pocket... * * @{ */ /** Replace default internal buffer with user-supplied buffer. * Instead of working on it's own private buffer, mpg123 will directly use the one you provide for storing decoded audio. */ EXPORT int mpg123_replace_buffer(mpg123_handle *mh, unsigned char *data, size_t size); /** The max size of one frame's decoded output with current settings. * Use that to determine an appropriate minimum buffer size for decoding one frame. */ EXPORT size_t mpg123_outblock(mpg123_handle *mh); /* @} */ #ifdef __cplusplus } #endif #endif