.%.dnsbl.httpbl.org', function($ip) {
// $octets = explode('.', $ip);
//
// // days since last activity
// if ($octets[1] > 14)
// return false;
//
// // "threat score" (http://www.projecthoneypot.org/threat_info.php)
// if ($octets[2] < 5)
// return false;
//
// return true;
// }, 'dnsbl.httpbl.org'); // hide our access key
// Skip checking certain IP addresses against blacklists (for troubleshooting or whatever)
$config['dnsbl_exceptions'][] = '127.0.0.1';
// To prevent bump attacks; returns the thread to last position after the last post is deleted.
$config['anti_bump_flood'] = false;
/*
* Introduction to vichan's spam filter:
*
* In simple terms, whenever a posting form on a page is generated (which happens whenever a
* post is made), vichan will add a random amount of hidden, obscure fields to it to
* confuse bots and upset hackers. These fields and their respective obscure values are
* validated upon posting with a 160-bit "hash". That hash can only be used as many times
* as you specify; otherwise, flooding bots could just keep reusing the same hash.
* Once a new set of inputs (and the hash) are generated, old hashes for the same thread
* and board are set to expire. Because you have to reload the page to get the new set
* of inputs and hash, if they expire too quickly and more than one person is viewing the
* page at a given time, vichan would return false positives (depending on how long the
* user sits on the page before posting). If your imageboard is quite fast/popular, set
* $config['spam']['hidden_inputs_max_pass'] and $config['spam']['hidden_inputs_expire'] to
* something higher to avoid false positives.
*
* See also: https://github.com/vichan-devel/vichan/wiki/your_request_looks_automated
*
*/
// Number of hidden fields to generate.
$config['spam']['hidden_inputs_min'] = 4;
$config['spam']['hidden_inputs_max'] = 12;
// How many times can a "hash" be used to post?
$config['spam']['hidden_inputs_max_pass'] = 12;
// How soon after regeneration do hashes expire (in seconds)?
$config['spam']['hidden_inputs_expire'] = 60 * 60 * 3; // three hours
// Whether to use Unicode characters in hidden input names and values.
$config['spam']['unicode'] = true;
// These are fields used to confuse the bots. Make sure they aren't actually used by vichan, or it won't work.
$config['spam']['hidden_input_names'] = array(
'user',
'username',
'login',
'search',
'q',
'url',
'firstname',
'lastname',
'text',
'message'
);
// Always update this when adding new valid fields to the post form, or EVERYTHING WILL BE DETECTED AS SPAM!
$config['spam']['valid_inputs'] = array(
'hash',
'board',
'thread',
'mod',
'name',
'email',
'subject',
'post',
'body',
'password',
'sticky',
'lock',
'raw',
'embed',
'g-recaptcha-response',
'h-captcha-response',
'captcha_cookie',
'captcha_text',
'spoiler',
'page',
'file_url',
'json_response',
'user_flag',
'no_country',
'tag',
'simple_spam'
);
// Enable simple anti-spam measure.
$config['simple_spam'] = array (
'question' => 'What is 2 + 2?',
'answer' => '4'
);
// Enable reCaptcha to make spam even harder. Rarely necessary.
$config['recaptcha'] = false;
// Public and private key pair from https://www.google.com/recaptcha/admin/create
$config['recaptcha_public'] = '6LcXTcUSAAAAAKBxyFWIt2SO8jwx4W7wcSMRoN3f';
$config['recaptcha_private'] = '6LcXTcUSAAAAAOGVbVdhmEM1_SyRF4xTKe8jbzf_';
// Enable hCaptcha as an alternative to reCAPTCHA.
$config['hcaptcha'] = false;
// Public and private key pair for using hCaptcha.
$config['hcaptcha_public'] = '7a4b21e0-dc53-46f2-a9f8-91d2e74b63a0';
$config['hcaptcha_private'] = '0x4e9A01bE637b51dC41a7Ea9865C3fDe4aB72Cf17';
// Enable Custom Captcha you need to change a couple of settings
//Read more at: /inc/captcha/readme.md
$config['captcha'] = array();
// Enable custom captcha provider
$config['captcha']['enabled'] = false;
//New thread captcha
//Require solving a captcha to post a thread.
//Default off.
$config['new_thread_capt'] = false;
// Custom captcha get provider path (if not working get the absolute path aka your url.)
$config['captcha']['provider_get'] = '../inc/captcha/entrypoint.php';
// Custom captcha check provider path
$config['captcha']['provider_check'] = '../inc/captcha/entrypoint.php';
// Custom captcha extra field (eg. charset)
$config['captcha']['extra'] = 'abcdefghijklmnopqrstuvwxyz';
// Ability to lock a board for normal users and still allow mods to post. Could also be useful for making an archive board
$config['board_locked'] = false;
// If poster's proxy supplies X-Forwarded-For header, check if poster's real IP is banned.
$config['proxy_check'] = false;
// If poster's proxy supplies X-Forwarded-For header, save it for further inspection and/or filtering.
$config['proxy_save'] = false;
/*
* Custom filters detect certain posts and reject/ban accordingly. They are made up of a condition and an
* action (for when ALL conditions are met). As every single post has to be put through each filter,
* having hundreds probably isn't ideal as it could slow things down.
*
* By default, the custom filters array is populated with basic flood prevention conditions. This
* includes forcing users to wait at least 5 seconds between posts. To disable (or amend) these flood
* prevention settings, you will need to empty the $config['filters'] array first. You can do so by
* adding "$config['filters'] = array();" to inc/instance-config.php. Basic flood prevention used to be
* controlled solely by config variables such as $config['flood_time'] and $config['flood_time_ip'], and
* it still is, as long as you leave the relevant $config['filters'] intact. These old config variables
* still exist for backwards-compatability and general convenience.
*
* Read more: https://github.com/vichan-devel/vichan/wiki/flood_filters
*/
// Minimum time between between each post by the same IP address.
$config['flood_time'] = 10;
// Minimum time between between each post with the exact same content AND same IP address.
$config['flood_time_ip'] = 120;
// Same as above but by a different IP address. (Same content, not necessarily same IP address.)
$config['flood_time_same'] = 30;
// Minimum time between posts by the same IP address (all boards).
$config['filters'][] = array(
'condition' => array(
'flood-match' => array('ip'), // Only match IP address
'flood-time' => &$config['flood_time']
),
'action' => 'reject',
'message' => &$config['error']['flood']
);
// Minimum time between posts by the same IP address with the same text.
$config['filters'][] = array(
'condition' => array(
'flood-match' => array('ip', 'body'), // Match IP address and post body
'flood-time' => &$config['flood_time_ip'],
'!body' => '/^$/', // Post body is NOT empty
),
'action' => 'reject',
'message' => &$config['error']['flood']
);
// Minimum time between posts with the same text. (Same content, but not always the same IP address.)
$config['filters'][] = array(
'condition' => array(
'flood-match' => array('body'), // Match only post body
'flood-time' => &$config['flood_time_same']
),
'action' => 'reject',
'message' => &$config['error']['flood']
);
//max threads per hour
$config['filters'][] = array(
'condition' => array(
'custom' => 'check_thread_limit'
),
'action' => 'reject',
'message' => &$config['error']['too_many_threads']
);
// Example: Minimum time between posts with the same file hash.
// $config['filters'][] = array(
// 'condition' => array(
// 'flood-match' => array('file'), // Match file hash
// 'flood-time' => 60 * 2 // 2 minutes minimum
// ),
// 'action' => 'reject',
// 'message' => &$config['error']['flood']
// );
// Example: Use the "flood-count" condition to only match if the user has made at least two posts with
// the same content and IP address in the past 2 minutes.
// $config['filters'][] = array(
// 'condition' => array(
// 'flood-match' => array('ip', 'body'), // Match IP address and post body
// 'flood-time' => 60 * 2, // 2 minutes
// 'flood-count' => 2 // At least two recent posts
// ),
// '!body' => '/^$/',
// 'action' => 'reject',
// 'message' => &$config['error']['flood']
// );
// Example: Blocking an imaginary known spammer, who keeps posting a reply with the name "surgeon",
// ending his posts with "regards, the surgeon" or similar.
// $config['filters'][] = array(
// 'condition' => array(
// 'name' => '/^surgeon$/',
// 'body' => '/regards,\s+(the )?surgeon$/i',
// 'OP' => false
// ),
// 'action' => 'reject',
// 'message' => 'Go away, spammer.'
// );
// Example: Same as above, but issuing a 3-hour ban instead of just reject the post and
// add an IP note with the message body
// $config['filters'][] = array(
// 'condition' => array(
// 'name' => '/^surgeon$/',
// 'body' => '/regards,\s+(the )?surgeon$/i',
// 'OP' => false
// ),
// 'action' => 'ban',
// 'add_note' => true,
// 'expires' => 60 * 60 * 3, // 3 hours
// 'reason' => 'Go away, spammer.'
// );
// Example: PHP 5.3+ (anonymous functions)
// There is also a "custom" condition, making the possibilities of this feature pretty much endless.
// This is a bad example, because there is already a "name" condition built-in.
// $config['filters'][] = array(
// 'condition' => array(
// 'body' => '/h$/i',
// 'OP' => false,
// 'custom' => function($post) {
// if($post['name'] == 'Anonymous')
// return true;
// else
// return false;
// }
// ),
// 'action' => 'reject'
// );
// Filter flood prevention conditions ("flood-match") depend on a table which contains a cache of recent
// posts across all boards. This table is automatically purged of older posts, determining the maximum
// "age" by looking at each filter. However, when determining the maximum age, vichan does not look
// outside the current board. This means that if you have a special flood condition for a specific board
// (contained in a board configuration file) which has a flood-time greater than any of those in the
// global configuration, you need to set the following variable to the maximum flood-time condition value.
// Set to -1 to disable.
// $config['flood_cache'] = 60 * 60 * 24; // 24 hours
$config['flood_cache'] = -1;
/*
* ====================
* Post settings
* ====================
*/
// Do you need a body for your reply posts?
$config['force_body'] = true;
// Do you need a body for new threads?
$config['force_body_op'] = true;
// Require an image for threads?
$config['force_image_op'] = true;
// Strip superfluous new lines at the end of a post.
$config['strip_superfluous_returns'] = true;
/// Strip combining characters from Unicode strings (eg. "Zalgo"). This will impact some non-English languages.
$config['strip_combining_chars'] = true;
// Maximum number of combining characters in a row allowed in Unicode strings so that they can still be used in moderation.
// Requires $config['strip_combining_chars'] = true;
$config['max_combining_chars'] = 3;
// Maximum numbers of threads that can be created every hour on a board.
$config['max_threads_per_hour'] = 30;
// Maximum post body length.
$config['max_body'] = 1800;
// Maximum number of lines allowed in a post.
$config['maximum_lines'] = 100;
// Maximum number of post body lines to show on the index page.
$config['body_truncate'] = 15;
// Maximum number of characters to show on the index page.
$config['body_truncate_char'] = 2500;
// Typically spambots try to post many links. Refuse a post with X links?
$config['max_links'] = 20;
// Maximum number of cites per post (prevents abuse, as more citations mean more database queries).
$config['max_cites'] = 45;
// Maximum number of cross-board links/citations per post.
$config['max_cross'] = $config['max_cites'];
// Track post citations (>>XX). Rebuilds posts after a cited post is deleted, removing broken links.
// Puts a little more load on the database.
$config['track_cites'] = true;
// Maximum filename length (will be truncated).
$config['max_filename_len'] = 255;
// Maximum filename length to display (the rest can be viewed upon mouseover).
$config['max_filename_display'] = 30;
// Allow users to delete their own posts?
$config['allow_delete'] = true;
// How long after posting should you have to wait before being able to delete that post? (In seconds.)
$config['delete_time'] = 10;
// How long should a user be able to delete their post for? (In seconds. Set to 0 to disable.)
$config['max_delete_time'] = 0;
// Reply limit (stops bumping thread when this is reached).
$config['reply_limit'] = 250;
// Image hard limit (stops allowing new image replies when this is reached if not zero).
$config['image_hard_limit'] = 0;
// Reply hard limit (stops allowing new replies when this is reached if not zero).
$config['reply_hard_limit'] = 0;
$config['robot_enable'] = false;
// Strip repeating characters when making hashes.
$config['robot_strip_repeating'] = true;
// Enabled mutes? vichan uses ROBOT9000's original 2^x implementation where x is the number of times
// you have been muted in the past.
$config['robot_mute'] = true;
// How long before vichan forgets about a mute?
$config['robot_mute_hour'] = 336; // 2 weeks
// If you want to alter the algorithm a bit. Default value is 2.
$config['robot_mute_multiplier'] = 2; // (n^x where x is the number of previous mutes)
$config['robot_mute_descritpion'] = _('You have been muted for unoriginal content.');
// Automatically convert things like "..." to Unicode characters ("…").
$config['auto_unicode'] = true;
// Whether to turn URLs into functional links.
$config['markup_urls'] = true;
// Optional URL prefix for links (eg. "http://anonym.to/?").
$config['link_prefix'] = '';
$config['url_ads'] = &$config['link_prefix']; // leave alias
// Allow "uploading" images via URL as well. Users can enter the URL of the image and then vichan will
// download it. Not usually recommended.
$config['allow_upload_by_url'] = false;
// The timeout for the above, in seconds.
$config['upload_by_url_timeout'] = 15;
// Enable early 404? With default settings, a thread would 404 if it was to leave page 3, if it had less
// than 3 replies.
$config['early_404'] = false;
$config['early_404_page'] = 3;
$config['early_404_replies'] = 5;
$config['early_404_staged'] = false;
// A wordfilter (sometimes referred to as just a "filter" or "censor") automatically scans users’ posts
// as they are submitted and changes or censors particular words or phrases.
// For a normal string replacement:
// $config['wordfilters'][] = array('cat', 'dog');
// Advanced raplcement (regular expressions):
// $config['wordfilters'][] = array('/ca[rt]/', 'dog', true); // 'true' means it's a regular expression
// Always act as if the user had typed "noko" into the email field.
$config['always_noko'] = false;
// Example: Custom tripcodes. The below example makes a tripcode of "#test123" evaluate to "!HelloWorld".
// $config['custom_tripcode']['#test123'] = '!HelloWorld';
// Example: Custom secure tripcode.
// $config['custom_tripcode']['##securetrip'] = '!!somethingelse';
// Allow users to mark their image as a "spoiler" when posting. The thumbnail will be replaced with a
// static spoiler image instead (see $config['spoiler_image']).
$config['spoiler_images'] = false;
// With the following, you can disable certain superfluous fields or enable "forced anonymous".
// When true, all names will be set to $config['anonymous'].
$config['field_disable_name'] = false;
// When true, there will be no email field.
$config['field_disable_email'] = false;
// When true, there will be no subject field.
$config['field_disable_subject'] = false;
// When true, there will be no subject field for replies.
$config['field_disable_reply_subject'] = false;
// When true, a blank password will be used for files (not usable for deletion).
$config['field_disable_password'] = false;
// When true, users are instead presented a selectbox for email. Contains, blank, noko and sage.
$config['field_email_selectbox'] = false;
// When true, the sage won't be displayed
$config['hide_sage'] = false;
// Don't display user's email when it's not "sage"
$config['hide_email'] = false;
// Attach country flags to posts.
$config['country_flags'] = false;
// Allow the user to decide whether or not he wants to display his country
$config['allow_no_country'] = false;
// Load all country flags from one file
$config['country_flags_condensed'] = true;
$config['country_flags_condensed_css'] = 'static/flags/flags.css';
// Allow the user choose a /pol/-like user_flag that will be shown in the post. For the user flags, please be aware
// that you will have to disable BOTH country_flags and contry_flags_condensed optimization (at least on a board
// where they are enabled).
$config['user_flag'] = false;
// List of user_flag the user can choose. Flags must be placed in the directory set by $config['uri_flags']
$config['user_flags'] = array();
/* example:
$config['user_flags'] = array (
'nz' => 'Nazi',
'cm' => 'Communist',
'eu' => 'Europe'
);
*/
// Allow dice rolling: an email field of the form "dice XdY+/-Z" will result in X Y-sided dice rolled and summed,
// with the modifier Z added, with the result displayed at the top of the post body.
$config['allow_roll'] = false;
// Use semantic URLs for threads, like /b/res/12345/daily-programming-thread.html
$config['slugify'] = false;
// Max size for slugs
$config['slug_max_size'] = 80;
/*
* ====================
* Ban settings
* ====================
*/
// Require users to see the ban page at least once for a ban even if it has since expired.
$config['require_ban_view'] = true;
// Show the post the user was banned for on the "You are banned" page.
$config['ban_show_post'] = false;
// Optional HTML to append to "You are banned" pages. For example, you could include instructions and/or
// a link to an email address or IRC chat room to appeal the ban.
$config['ban_page_extra'] = '';
// Allow users to appeal bans through vichan.
$config['ban_appeals'] = false;
// Do not allow users to appeal bans that are shorter than this length (in seconds).
$config['ban_appeals_min_length'] = 60 * 60 * 6; // 6 hours
// How many ban appeals can be made for a single ban?
$config['ban_appeals_max'] = 1;
// Show moderator name on ban page.
$config['show_modname'] = false;
/*
* ====================
* Markup settings
* ====================
*/
// "Wiki" markup syntax ($config['wiki_markup'] in pervious versions):
$config['markup'][] = array("/'''(.+?)'''/", "\$1");
$config['markup'][] = array("/''(.+?)''/", "\$1");
$config['markup'][] = array("/\*\*(.+?)\*\*/", "\$1");
$config['markup'][] = array("/^[ |\t]*==(.+?)==[ |\t]*$/m", "\$1");
// Code markup. This should be set to a regular expression, using tags you want to use. Examples:
// "/\[code\](.*?)\[\/code\]/is"
// "/```([a-z0-9-]{0,20})\n(.*?)\n?```\n?/s"
$config['markup_code'] = false;
// Repair markup with HTML Tidy. This may be slower, but it solves nesting mistakes. vichan, at the
// time of writing this, can not prevent out-of-order markup tags (eg. "**''test**'') without help from
// HTML Tidy.
$config['markup_repair_tidy'] = false;
// Use 'bare' config option of tidy::repairString.
// This option replaces some punctuation marks with their ASCII counterparts.
// Dashes are replaced with (single) hyphens, for example.
$config['markup_repair_tidy_bare'] = true;
// Always regenerate markup. This isn't recommended and should only be used for debugging; by default,
// vichan only parses post markup when it needs to, and keeps post-markup HTML in the database. This
// will significantly impact performance when enabled.
$config['always_regenerate_markup'] = false;
/*
* ====================
* Image settings
* ====================
*/
// Maximum number of images allowed. Increasing this number enabled multi image.
// If you make it more than 1, make sure to enable the below script for the post form to change.
// $config['additional_javascript'][] = 'js/multi-image.js';
$config['max_images'] = 1;
// Method to use for determing the max filesize.
// "split" means that your max filesize is split between the images. For example, if your max filesize
// is 2MB, the filesizes of all files must add up to 2MB for it to work.
// "each" means that each file can be 2MB, so if your max_images is 3, each post could contain 6MB of
// images. "split" is recommended.
$config['multiimage_method'] = 'split';
// For resizing, maximum thumbnail dimensions.
$config['thumb_width'] = 255;
$config['thumb_height'] = 255;
// Maximum thumbnail dimensions for thread (OP) images.
$config['thumb_op_width'] = 255;
$config['thumb_op_height'] = 255;
// Thumbnail extension ("png" recommended). Leave this empty if you want the extension to be inherited
// from the uploaded file.
$config['thumb_ext'] = 'png';
// Maximum amount of animated GIF frames to resize (more frames can mean more processing power). A value
// of "1" means thumbnails will not be animated. Requires $config['thumb_ext'] to be 'gif' (or blank) and
// $config['thumb_method'] to be 'imagick', 'convert', or 'convert+gifsicle'. This value is not
// respected by 'convert'; will just resize all frames if this is > 1.
$config['thumb_keep_animation_frames'] = 1;
/*
* Thumbnailing method:
*
* 'gd' PHP GD (default). Only handles the most basic image formats (GIF, JPEG, PNG).
* GD is a prerequisite for vichan no matter what method you choose.
*
* 'imagick' PHP's ImageMagick bindings. Fast and efficient, supporting many image formats.
* A few minor bugs. http://pecl.php.net/package/imagick
*
* 'convert' The command line version of ImageMagick (`convert`). Fixes most of the bugs in
* PHP Imagick. `convert` produces the best still thumbnails and is highly recommended.
*
* 'gm' GraphicsMagick (`gm`) is a fork of ImageMagick with many improvements. It is more
* efficient and gets thumbnailing done using fewer resources.
*
* 'convert+gifscale'
* OR 'gm+gifsicle' Same as above, with the exception of using `gifsicle` (command line application)
* instead of `convert` for resizing GIFs. It's faster and resulting animated
* thumbnails have less artifacts than if resized with ImageMagick.
*/
$config['thumb_method'] = 'gd';
// $config['thumb_method'] = 'convert';
// Command-line options passed to ImageMagick when using `convert` for thumbnailing. Don't touch the
// placement of "%s" and "%d".
$config['convert_args'] = '-size %dx%d %s -thumbnail %dx%d -auto-orient +profile "*" %s';
// Strip EXIF metadata from JPEG files.
$config['strip_exif'] = false;
// Use the command-line `exiftool` tool to strip EXIF metadata without decompressing/recompressing JPEGs.
// Ignored when $config['redraw_image'] is true.
$config['use_exiftool'] = false;
// Redraw the image to strip any excess data (commonly ZIP archives) WARNING: This might strip the
// animation of GIFs, depending on the chosen thumbnailing method. It also requires recompressing
// the image, so more processing power is required.
$config['redraw_image'] = false;
// Automatically correct the orientation of JPEG files using -auto-orient in `convert`. This only works
// when `convert` or `gm` is selected for thumbnailing. Again, requires more processing power because
// this basically does the same thing as $config['redraw_image']. (If $config['redraw_image'] is enabled,
// this value doesn't matter as $config['redraw_image'] attempts to correct orientation too.)
$config['convert_auto_orient'] = false;
// Regular expression to check for an XSS exploit with IE 6 and 7. To disable, set to false.
// Details: https://github.com/savetheinternet/Tinyboard/issues/20
$config['ie_mime_type_detection'] = '/<(?:body|head|html|img|plaintext|pre|script|table|title|a href|channel|scriptlet)/i';
// Allowed image file extensions.
$config['allowed_ext'][] = 'jpg';
$config['allowed_ext'][] = 'jpeg';
$config['allowed_ext'][] = 'bmp';
$config['allowed_ext'][] = 'gif';
$config['allowed_ext'][] = 'png';
$config['allowed_ext'][] = 'webp';
// $config['allowed_ext'][] = 'svg';
// Allowed extensions for OP. Inherits from the above setting if set to false. Otherwise, it overrides both allowed_ext and
// allowed_ext_files (filetypes for downloadable files should be set in allowed_ext_files as well). This setting is useful
// for creating fileboards.
$config['allowed_ext_op'] = false;
// Allowed additional file extensions (not images; downloadable files).
// $config['allowed_ext_files'][] = 'txt';
// $config['allowed_ext_files'][] = 'zip';
// An alternative function for generating image filenames, instead of the default UNIX timestamp.
// $config['filename_func'] = function($post) {
// return sprintf("%s", time() . substr(microtime(), 2, 3));
// };
// Thumbnail to use for the non-image file uploads.
$config['file_icons']['default'] = 'file.png';
$config['file_icons']['zip'] = 'zip.png';
$config['file_icons']['webm'] = 'video.png';
$config['file_icons']['mp4'] = 'video.png';
// Example: Custom thumbnail for certain file extension.
// $config['file_icons']['extension'] = 'some_file.png';
// Location of above images.
$config['file_thumb'] = 'static/%s';
// Location of thumbnail to use for spoiler images.
$config['spoiler_image'] = 'static/spoiler.png';
// Location of thumbnail to use for deleted images.
$config['image_deleted'] = 'static/deleted.png';
// When a thumbnailed image is going to be the same (in dimension), just copy the entire file and use
// that as a thumbnail instead of resizing/redrawing.
$config['minimum_copy_resize'] = false;
// Maximum image upload size in bytes.
$config['max_filesize'] = 10 * 1024 * 1024; // 10MB
// Maximum image dimensions.
$config['max_width'] = 10000;
$config['max_height'] = $config['max_width'];
// Reject duplicate image uploads.
$config['image_reject_repost'] = true;
// Reject duplicate image uploads within the same thread. Doesn't change anything if
// $config['image_reject_repost'] is true.
$config['image_reject_repost_in_thread'] = false;
// Display the aspect ratio of uploaded files.
$config['show_ratio'] = false;
// Display the file's original filename.
$config['show_filename'] = true;
// WebM Settings
$config['webm']['use_ffmpeg'] = false;
$config['webm']['allow_audio'] = false;
$config['webm']['max_length'] = 120;
$config['webm']['ffmpeg_path'] = 'ffmpeg';
$config['webm']['ffprobe_path'] = 'ffprobe';
// Display image identification links for ImgOps, regex.info/exif, Google Images and iqdb.
$config['image_identification'] = false;
// Which of the identification links to display. Only works if $config['image_identification'] is true.
$config['image_identification_imgops'] = true;
$config['image_identification_exif'] = true;
$config['image_identification_google'] = true;
$config['image_identification_yandex'] = true;
// Anime/manga search engine.
$config['image_identification_iqdb'] = false;
// Set this to true if you're using a BSD
$config['bsd_md5'] = false;
// Set this to true if you're using Linux and you can execute `md5sum` binary.
$config['gnu_md5'] = false;
// Use Tesseract OCR to retrieve text from images, so you can use it as a spamfilter.
$config['tesseract_ocr'] = false;
// Tesseract parameters
$config['tesseract_params'] = '';
// Tesseract preprocess command
$config['tesseract_preprocess_command'] = 'convert -monochrome %s -';
// Number of posts in a "View Last X Posts" page
$config['noko50_count'] = 50;
// Number of posts a thread needs before it gets a "View Last X Posts" page.
// Set to an arbitrarily large value to disable.
$config['noko50_min'] = 100;
/*
* ====================
* Board settings
* ====================
*/
// Maximum amount of threads to display per page.
$config['threads_per_page'] = 10;
// Maximum number of pages. Content past the last page is automatically purged.
$config['max_pages'] = 10;
// Replies to show per thread on the board index page.
$config['threads_preview'] = 5;
// Same as above, but for stickied threads.
$config['threads_preview_sticky'] = 1;
// How to display the URI of boards. Usually '/%s/' (/b/, /mu/, etc). This doesn't change the URL. Find
// $config['board_path'] if you wish to change the URL.
$config['board_abbreviation'] = '/%s/';
// The default name (ie. Anonymous). Can be an array - in that case it's picked randomly from the array.
// Example: $config['anonymous'] = array('Bernd', 'Senpai', 'Jonne', 'ChanPro');
$config['anonymous'] = 'Anonymous';
// Number of reports you can create at once.
$config['report_limit'] = 3;
// Allow unfiltered HTML in board subtitle. This is useful for placing icons and links.
$config['allow_subtitle_html'] = false;
/*
* ====================
* Display settings
* ====================
*/
// vichan has been translated into a few langauges. See inc/locale for available translations.
$config['locale'] = 'en'; // (en, ru_RU.UTF-8, fi_FI.UTF-8, pl_PL.UTF-8)
// Timezone to use for displaying dates/times.
$config['timezone'] = 'America/Los_Angeles';
// The format string passed to strftime() for displaying dates.
// http://www.php.net/manual/en/function.strftime.php
$config['post_date'] = '%m/%d/%y (%a) %H:%M:%S';
// Same as above, but used for "you are banned' pages.
$config['ban_date'] = '%A %e %B, %Y';
// The names on the post buttons. (On most imageboards, these are both just "Post").
$config['button_newtopic'] = _('New Topic');
$config['button_reply'] = _('New Reply');
// Assign each poster in a thread a unique ID, shown by "ID: xxxxx" before the post number.
$config['poster_ids'] = false;
// Number of characters in the poster ID (maximum is 40).
$config['poster_id_length'] = 5;
// Show thread subject in page title.
$config['thread_subject_in_title'] = false;
// Additional lines added to the footer of all pages.
$config['footer'][] = _('All trademarks, copyrights, comments, and images on this page are owned by and are the responsibility of their respective parties.');
// Characters used to generate a random password (with Javascript).
$config['genpassword_chars'] = 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789!@#$%^&*()_+';
// Banner settings.
// Banners are rotating, random images displayed to users at the top of thread pages and the catalog.
// You should upload your banners to static/banners.
$config['url_banner'] = '/b.php'; // Custom script may be used.
// Setting the banner dimensions stops the page shifting as it loads. If you have banners of various different sizes, unset these.
$config['banner_width'] = 300;
$config['banner_height'] = 100;
// Custom stylesheets available for the user to choose. See the "stylesheets/" folder for a list of
// available stylesheets (or create your own).
$config['stylesheets']['Yotsuba B'] = ''; // Default; there is no additional/custom stylesheet for this.
$config['stylesheets']['Yotsuba'] = 'yotsuba.css';
// $config['stylesheets']['Futaba'] = 'futaba.css';
// $config['stylesheets']['Dark'] = 'dark.css';
// The prefix for each stylesheet URI. Defaults to $config['root']/stylesheets/
// $config['uri_stylesheets'] = 'http://static.example.org/stylesheets/';
// The default stylesheet to use.
$config['default_stylesheet'] = array('Yotsuba B', $config['stylesheets']['Yotsuba B']);
// Make stylesheet selections board-specific.
$config['stylesheets_board'] = false;
// Use Font-Awesome for displaying lock and pin icons, instead of the images in static/.
// http://fortawesome.github.io/Font-Awesome/icon/pushpin/
// http://fortawesome.github.io/Font-Awesome/icon/lock/
$config['font_awesome'] = true;
$config['font_awesome_css'] = 'stylesheets/font-awesome/css/font-awesome.min.css';
/*
* For lack of a better name, “boardlinks” are those sets of navigational links that appear at the top
* and bottom of board pages. They can be a list of links to boards and/or other pages such as status
* blogs and social network profiles/pages.
*
* "Groups" in the boardlinks are marked with square brackets. vichan allows for infinite recursion
* with groups. Each array() in $config['boards'] represents a new square bracket group.
*/
// $config['boards'] = array(
// array('a', 'b'),
// array('c', 'd', 'e', 'f', 'g'),
// array('h', 'i', 'j'),
// array('k', array('l', 'm')),
// array('status' => 'http://status.example.org/')
// );
// Whether or not to put brackets around the whole board list
$config['boardlist_wrap_bracket'] = false;
// Show page navigation links at the top as well.
$config['page_nav_top'] = false;
// Show "Catalog" link in page navigation. Use with the Catalog theme. Set to false to disable.
$config['catalog_link'] = 'catalog.html';
// Board categories. Only used in the "Categories" theme.
// $config['categories'] = array(
// 'Group Name' => array('a', 'b', 'c'),
// 'Another Group' => array('d')
// );
// Optional for the Categories theme. This is an array of name => (title, url) groups for categories
// with non-board links.
// $config['custom_categories'] = array(
// 'Links' => array(
// 'Github' => 'https://github.com/my/project',
// 'Donate' => 'donate.html'
// )
// );
// Automatically remove unnecessary whitespace when compiling HTML files from templates.
$config['minify_html'] = true;
/*
* Advertisement HTML to appear at the top and bottom of board pages.
*/
// $config['ad'] = array(
// 'top' => '',
// 'bottom' => '',
// );
// Display flags (when available). This config option has no effect unless poster flags are enabled (see
// $config['country_flags']). Disable this if you want all previously-assigned flags to be hidden.
$config['display_flags'] = true;
// Location of post flags/icons (where "%s" is the flag name). Defaults to static/flags/%s.png.
// $config['uri_flags'] = 'http://static.example.org/flags/%s.png';
// Width and height (and more?) of post flags. Can be overridden with the vichan post modifier:
// .
$config['flag_style'] = 'width:16px;height:11px;';
/*
* ====================
* Javascript
* ====================
*/
// Additional Javascript files to include on board index and thread pages. See js/ for available scripts.
$config['additional_javascript'][] = 'js/jquery.min.js';
$config['additional_javascript'][] = 'js/inline-expanding.js';
// $config['additional_javascript'][] = 'js/local-time.js';
// Some scripts require jQuery. Check the comments in script files to see what's needed. When enabling
// jQuery, you should first empty the array so that "js/query.min.js" can be the first, and then re-add
// "js/inline-expanding.js" or else the inline-expanding script might not interact properly with other
// scripts.
// $config['additional_javascript'] = array();
// $config['additional_javascript'][] = 'js/jquery.min.js';
// $config['additional_javascript'][] = 'js/inline-expanding.js';
// $config['additional_javascript'][] = 'js/auto-reload.js';
// $config['additional_javascript'][] = 'js/post-hover.js';
// $config['additional_javascript'][] = 'js/style-select.js';
// $config['additional_javascript'][] = 'js/captcha.js';
// Where these script files are located on the web. Defaults to $config['root'].
// $config['additional_javascript_url'] = 'http://static.example.org/vichan-javascript-stuff/';
// Compile all additional scripts into one file ($config['file_script']) instead of including them seperately.
$config['additional_javascript_compile'] = false;
// Minify Javascript using http://code.google.com/p/minify/.
$config['minify_js'] = false;
// Dispatch thumbnail loading and image configuration with JavaScript. It will need a certain javascript
// code to work.
$config['javascript_image_dispatch'] = false;
/*
* ====================
* Video embedding
* ====================
*/
// Enable embedding (see below).
$config['enable_embedding'] = false;
// Custom embedding (YouTube, vimeo, etc.)
// It's very important that you match the entire input (with ^ and $) or things will not work correctly.
// Be careful when creating a new embed, because depending on the URL you end up exposing yourself to an XSS.
$config['embedding'] = array(
array(
'/^https?:\/\/(\w+\.)?youtube\.com\/watch\?v=([a-zA-Z0-9\-_]{10,11})?$/i',
''
),
array(
'/^https?:\/\/(\w+\.)?vimeo\.com\/(\d{2,10})(\?.+)?$/i',
''
),
array(
'/^https?:\/\/(\w+\.)?dailymotion\.com\/video\/([a-zA-Z0-9]{2,10})(_.+)?$/i',
''
),
array(
'/^https?:\/\/(\w+\.)?metacafe\.com\/watch\/(\d+)\/([a-zA-Z0-9_\-.]+)\/(\?[^\'"<>]+)?$/i',
''
),
array(
'/^https?:\/\/(\w+\.)?vocaroo\.com\/([a-zA-Z0-9]{2,12})$/i',
''
)
);
// Embedding width and height.
$config['embed_width'] = 300;
$config['embed_height'] = 246;
/*
* ====================
* Error messages
* ====================
*/
// Error messages
$config['error']['bot'] = _('You look like a bot.');
$config['error']['referer'] = _('Your browser sent an invalid or no HTTP referer.');
$config['error']['toolong'] = _('The %s field was too long.');
$config['error']['toolong_body'] = _('The body was too long.');
$config['error']['tooshort_body'] = _('The body was too short or empty.');
$config['error']['toomanylines'] = _('Your post contains too many lines!');
$config['error']['noimage'] = _('You must upload an image.');
$config['error']['toomanyimages'] = _('You have attempted to upload too many images!');
$config['error']['nomove'] = _('The server failed to handle your upload.');
$config['error']['fileext'] = _('Unsupported image format.');
$config['error']['noboard'] = _('Invalid board!');
$config['error']['nonexistant'] = _('Thread specified does not exist.');
$config['error']['locked'] = _('Thread locked. You may not reply at this time.');
$config['error']['reply_hard_limit'] = _('Thread has reached its maximum reply limit.');
$config['error']['image_hard_limit'] = _('Thread has reached its maximum image limit.');
$config['error']['nopost'] = _('You didn\'t make a post.');
$config['error']['flood'] = _('Flood detected; Post discarded.');
$config['error']['too_many_threads'] = _('The hourly thread limit has been reached. Please post in an existing thread.');
$config['error']['spam'] = _('Your request looks automated; Post discarded.');
$config['error']['simple_spam'] = _('You must answer the question to make a new thread. See the last field.');
$config['error']['unoriginal'] = _('Unoriginal content!');
$config['error']['muted'] = _('Unoriginal content! You have been muted for %d seconds.');
$config['error']['youaremuted'] = _('You are muted! Expires in %d seconds.');
$config['error']['dnsbl'] = _('Your IP address is listed in %s.');
$config['error']['toomanylinks'] = _('Too many links; flood detected.');
$config['error']['toomanycites'] = _('Too many cites; post discarded.');
$config['error']['toomanycross'] = _('Too many cross-board links; post discarded.');
$config['error']['nodelete'] = _('You didn\'t select anything to delete.');
$config['error']['noreport'] = _('You didn\'t select anything to report.');
$config['error']['invalidreport'] = _('The reason was too long.');
$config['error']['toomanyreports'] = _('You can\'t report that many posts at once.');
$config['error']['invalidpassword'] = _('Wrong password…');
$config['error']['invalidimg'] = _('Invalid image.');
$config['error']['phpfileserror'] = _('Upload failure (file #%index%): Error code %code%. Refer to http://php.net/manual/en/features.file-upload.errors.php; post discarded.');
$config['error']['unknownext'] = _('Unknown file extension.');
$config['error']['filesize'] = _('Maximum file size: %maxsz% bytes Your file\'s size: %filesz% bytes');
$config['error']['maxsize'] = _('The file was too big.');
$config['error']['genwebmerror'] = _('There was a problem processing your webm.');
$config['error']['webmerror'] = _('There was a problem processing your webm.');//Is this error used anywhere ?
$config['error']['invalidwebm'] = _('Invalid webm uploaded.');
$config['error']['webmhasaudio'] = _('The uploaded webm contains an audio or another type of additional stream.');
$config['error']['webmtoolong'] =_('The uploaded webm is longer than %d seconds.');
$config['error']['fileexists'] = _('That file already exists!');
$config['error']['fileexistsinthread'] = _('That file already exists in this thread!');
$config['error']['delete_too_soon'] = _('You\'ll have to wait another %s before deleting that.');
$config['error']['delete_too_late'] = _('You cannot delete a post this old.');
$config['error']['mime_exploit'] = _('MIME type detection XSS exploit (IE) detected; post discarded.');
$config['error']['invalid_embed'] = _('Couldn\'t make sense of the URL of the video you tried to embed.');
$config['error']['captcha'] = _('You seem to have mistyped the verification.');
$config['error']['flag_undefined'] = _('The flag %s is undefined, your PHP version is too old!');
$config['error']['flag_wrongtype'] = _('defined_flags_accumulate(): The flag %s is of the wrong type!');
// Moderator errors
$config['error']['toomanyunban'] = _('You are only allowed to unban %s users at a time. You tried to unban %u users.');
$config['error']['invalid'] = _('Invalid username and/or password.');
$config['error']['notamod'] = _('You are not a mod…');
$config['error']['invalidafter'] = _('Invalid username and/or password. Your user may have been deleted or changed.');
$config['error']['malformed'] = _('Invalid/malformed cookies.');
$config['error']['missedafield'] = _('Your browser didn\'t submit an input when it should have.');
$config['error']['required'] = _('The %s field is required.');
$config['error']['invalidfield'] = _('The %s field was invalid.');
$config['error']['boardexists'] = _('There is already a %s board.');
$config['error']['noaccess'] = _('You don\'t have permission to do that.');
$config['error']['invalidpost'] = _('That post doesn\'t exist…');
$config['error']['404'] = _('Page not found.');
$config['error']['modexists'] = _('That mod already exists!');
$config['error']['invalidtheme'] = _('That theme doesn\'t exist!');
$config['error']['csrf'] = _('Invalid security token! Please go back and try again.');
$config['error']['badsyntax'] = _('Your code contained PHP syntax errors. Please go back and correct them. PHP says: ');
/*
* =========================
* Directory/file settings
* =========================
*/
// The root directory, including the trailing slash, for vichan.
// Examples: '/', 'http://boards.chan.org/', '/chan/'.
if (isset($_SERVER['REQUEST_URI'])) {
$request_uri = $_SERVER['REQUEST_URI'];
if (isset($_SERVER['QUERY_STRING']) && $_SERVER['QUERY_STRING'] !== '')
$request_uri = substr($request_uri, 0, - 1 - strlen($_SERVER['QUERY_STRING']));
$config['root'] = str_replace('\\', '/', dirname($request_uri)) == '/'
? '/' : str_replace('\\', '/', dirname($request_uri)) . '/';
unset($request_uri);
} else
$config['root'] = '/'; // CLI mode
// The scheme and domain. This is used to get the site's absolute URL (eg. for image identification links).
// If you use the CLI tools, it would be wise to override this setting.
$config['domain'] = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] != 'off') ? 'https://' : 'http://';
$config['domain'] .= isset($_SERVER['HTTP_HOST']) ? $_SERVER['HTTP_HOST'] : 'localhost';
// If for some reason the folders and static HTML index files aren't in the current working direcotry,
// enter the directory path here. Otherwise, keep it false.
$config['root_file'] = false;
// Location of primary files.
$config['file_index'] = 'index.html';
$config['file_page'] = '%d.html'; // NB: page is both an index page and a thread
$config['file_catalog'] = 'catalog.html';
$config['file_page50'] = '%d+50.html';
$config['file_page_slug'] = '%d-%s.html';
$config['file_page50_slug'] = '%d-%s+50.html';
$config['file_mod'] = 'mod.php';
$config['file_post'] = 'post.php';
$config['file_script'] = 'main.js';
$config['file_board_index'] = 'index.html';
$config['file_page_template'] = 'page.html';
$config['file_report'] = 'report.html';
$config['file_error'] = 'error.html';
$config['file_login'] = 'login.html';
$config['file_banned'] = 'banned.html';
$config['file_fileboard'] = 'fileboard.html';
$config['file_thread'] = 'thread.html';
$config['file_post_reply'] = 'post_reply.html';
$config['file_post_thread'] = 'post_thread.html';
$config['file_post_thread_fileboard'] = 'post_thread_fileboard.html';
// Mod page file settings
$config['file_mod_dashboard'] = 'mod/dashboard.html';
$config['file_mod_login'] = 'mod/login.html';
$config['file_mod_confim'] = 'mod/confirm.html';
$config['file_mod_board'] = 'mod/board.html';
$config['file_mod_news'] = 'mod/news.html';
$config['file_mod_log'] = 'mod/log.html';
$config['file_mod_view_ip'] = 'mod/view_ip.html';
$config['file_mod_ban_form'] = 'mod/ban_form.html';
$config['file_mod_ban_list'] = 'mod/ban_list.html';
$config['file_mod_ban_appeals'] = 'mod/ban_appeals.html';
$config['file_mod_noticeboard'] = 'mod/noticeboard.html';
$config['file_mod_search_results'] = 'mod/search_results.html';
$config['file_mod_move'] = 'mod/move.html';
$config['file_mod_move_reply'] = 'mod/move_reply.html';
$config['file_mod_edit_post_form'] = 'mod/edit_post_form.html';
$config['file_mod_user'] = 'mod/user.html';
$config['file_mod_users'] = 'mod/users.html';
$config['file_mod_pm'] = 'mod/pm.html';
$config['file_mod_new_pm'] = 'mod/new_pm.html';
$config['file_mod_inbox'] = 'mod/inbox.html';
$config['file_mod_rebuilt'] = 'mod/rebuilt.html';
$config['file_mod_rebuild'] = 'mod/rebuild.html';
$config['file_mod_report'] = 'mod/report.html';
$config['file_mod_reports'] = 'mod/reports.html';
$config['file_mod_recent_posts'] = 'mod/recent_posts.html';
$config['file_mod_config_editor'] = 'mod/config-editor.html';
$config['file_mod_config_editor_php'] = 'mod/config-editor-php.html';
$config['file_mod_themes'] = 'mod/themes.html';
$config['file_mod_theme_installed'] = 'mod/theme_installed.html';
$config['file_mod_theme_config'] = 'mod/theme_config.html';
$config['file_mod_theme_rebuilt'] = 'mod/theme_rebuilt.html';
$config['file_mod_pages'] = 'mod/pages.html';
$config['file_mod_edit_page'] = 'mod/edit_page.html';
$config['file_mod_debug_antispam'] = 'mod/debug/antispam.html';
$config['file_mod_debug_recent_posts'] = 'mod/debug/recent_posts.html';
$config['file_mod_debug_sql'] = 'mod/debug/sql.html';
// Board directory, followed by a forward-slash (/).
$config['board_path'] = '%s/';
// Misc directories.
$config['dir']['img'] = 'src/';
$config['dir']['thumb'] = 'thumb/';
$config['dir']['res'] = 'res/';
// For load balancing, having a seperate server (and domain/subdomain) for serving static content is
// possible. This can either be a directory or a URL. Defaults to $config['root'] . 'static/'.
// $config['dir']['static'] = 'http://static.example.org/';
// Where to store the .html templates. This folder and the template files must exist.
$config['dir']['template'] = getcwd() . '/templates';
// Location of vichan "themes".
$config['dir']['themes'] = getcwd() . '/templates/themes';
// Same as above, but a URI (accessable by web interface).
$config['dir']['themes_uri'] = 'templates/themes';
// Home directory. Used by themes.
$config['dir']['home'] = '';
// Location of a blank 1x1 gif file. Only used when country_flags_condensed is enabled
// $config['image_blank'] = 'static/blank.gif';
// Static images. These can be URLs OR base64 (data URI scheme). These are only used if
// $config['font_awesome'] is false (default).
// $config['image_sticky'] = 'static/sticky.png';
// $config['image_locked'] = 'static/locked.gif';
// $config['image_bumplocked'] = 'static/sage.png';
// $config['image_cyclical'] = 'static/cycle.png';
// If you want to put images and other dynamic-static stuff on another (preferably cookieless) domain.
// This will override $config['root'] and $config['dir']['...'] directives. "%s" will get replaced with
// $board['dir'], which includes a trailing slash.
// $config['uri_thumb'] = 'http://images.example.org/%sthumb/';
// $config['uri_img'] = 'http://images.example.org/%ssrc/';
// Set custom locations for stylesheets and the main script file. This can be used for load balancing
// across multiple servers or hostnames.
// $config['url_stylesheet'] = 'http://static.example.org/style.css'; // main/base stylesheet
// $config['url_javascript'] = 'http://static.example.org/main.js';
// Website favicon.
// $config['url_favicon'] = '/favicon.gif';
// Try not to build pages when we shouldn't have to.
$config['try_smarter'] = true;
/*
* ====================
* Advanced build
* ====================
*/
// Strategies for file generation. Also known as an "advanced build". If you don't have performance
// issues, you can safely ignore that part, because it's hard to configure and won't even work on
// your free webhosting.
//
// A strategy is a function, that given the PHP environment and ($fun, $array) variable pair, returns
// an $action array or false.
//
// $fun - a controller function name, see inc/controller.php. This is named after functions, so that
// we can generate the files in daemon.
//
// $array - arguments to be passed
//
// $action - action to be taken. It's an array, and the first element of it is one of the following:
// * "immediate" - generate the page immediately
// * "defer" - defer page generation to a moment a worker daemon gets to build it (serving a stale
// page in the meantime). The remaining arguments are daemon-specific. Daemon isn't
// implemented yet :DDDD inb4 while(true) { generate(Queue::Get()) }; (which is probably it).
// * "build_on_load" - defer page generation to a moment, when the user actually accesses the page.
// This is a smart_build behaviour. You shouldn't use this one too much, if you
// use it for active boards, the server may choke due to a possible race condition.
// See my blog post: https://engine.vichan.net/blog/res/2.html
//
// So, let's assume we want to build a thread 1324 on board /b/, because a new post appeared there.
// We try the first strategy, giving it arguments: 'sb_thread', array('b', 1324). The strategy will
// now return a value $action, denoting an action to do. If $action is false, we try another strategy.
//
// As I said, configuration isn't easy.
//
// 1. chmod 0777 directories: tmp/locks/ and tmp/queue/.
// 2. serve 403 and 404 requests to go thru smart_build.php
// for nginx, this blog post contains config snippets: https://engine.vichan.net/blog/res/2.html
// 3. disable indexes in your webserver
// 4. launch any number of daemons (eg. twice your number of threads?) using the command:
// $ tools/worker.php
// You don't need to do that step if you are not going to use the "defer" option.
// 5. enable smart_build_helper (see below)
// 6. edit the strategies (see inc/functions.php for the builtin ones). You can use lambdas. I will test
// various ones and include one that works best for me.
$config['generation_strategies'] = array();
// Add a sane strategy. It forces to immediately generate a page user is about to land on. Otherwise,
// it has no opinion, so it needs a fallback strategy.
$config['generation_strategies'][] = 'strategy_sane';
// Add an immediate catch-all strategy. This is the default function of imageboards: generate all pages
// on post time.
$config['generation_strategies'][] = 'strategy_immediate';
// NOT RECOMMENDED: Instead of an all-"immediate" strategy, you can use an all-"build_on_load" one (used
// to be initialized using $config['smart_build']; ) for all pages instead of those to be build
// immediately. A rebuild done in this mode should remove all your static files
// $config['generation_strategies'][1] = 'strategy_smart_build';
// Deprecated. Leave it false. See above.
$config['smart_build'] = false;
// Use smart_build.php for dispatching missing requests. It may be useful without smart_build or advanced
// build, for example it will regenerate the missing files.
$config['smart_build_helper'] = true;
// smart_build.php: when a file doesn't exist, where should we redirect?
$config['page_404'] = '/404.html';
// Extra controller entrypoints. Controller is used only by smart_build and advanced build.
$config['controller_entrypoints'] = array();
/*
* ====================
* Mod settings
* ====================
*/
// Limit how many bans can be removed via the ban list. Set to false (or zero) for no limit.
$config['mod']['unban_limit'] = false;
// Whether or not to lock moderator sessions to IP addresses. This makes cookie theft ineffective.
$config['mod']['lock_ip'] = true;
// The page that is first shown when a moderator logs in. Defaults to the dashboard (?/).
$config['mod']['default'] = '/';
// Mod links (full HTML).
$config['mod']['link_delete'] = '[D]';
$config['mod']['link_ban'] = '[B]';
$config['mod']['link_bandelete'] = '[B&D]';
$config['mod']['link_deletefile'] = '[F]';
$config['mod']['link_spoilerimage'] = '[S]';
$config['mod']['link_deletebyip'] = '[D+]';
$config['mod']['link_deletebyip_global'] = '[D++]';
$config['mod']['link_sticky'] = '[Sticky]';
$config['mod']['link_desticky'] = '[-Sticky]';
$config['mod']['link_lock'] = '[Lock]';
$config['mod']['link_unlock'] = '[-Lock]';
$config['mod']['link_bumplock'] = '[Sage]';
$config['mod']['link_bumpunlock'] = '[-Sage]';
$config['mod']['link_editpost'] = '[Edit]';
$config['mod']['link_move'] = '[Move]';
$config['mod']['link_cycle'] = '[Cycle]';
$config['mod']['link_uncycle'] = '[-Cycle]';
// Moderator capcodes.
$config['capcode'] = ' ## %s';
// "## Custom" becomes lightgreen, italic and bold:
//$config['custom_capcode']['Custom'] =' ## %s';
// "## Mod" makes everything purple, including the name and tripcode:
//$config['custom_capcode']['Mod'] = array(
// ' ## %s',
// 'color:purple', // Change name style; optional
// 'color:purple' // Change tripcode style; optional
//);
// "## Admin" makes everything red and bold, including the name and tripcode:
//$config['custom_capcode']['Admin'] = array(
// ' ## %s',
// 'color:red;font-weight:bold', // Change name style; optional
// 'color:red;font-weight:bold' // Change tripcode style; optional
//);
// Enable the moving of single replies
$config['move_replies'] = false;
// How often (minimum) to purge the ban list of expired bans (which have been seen). Only works when
// $config['cache'] is enabled and working.
$config['purge_bans'] = 60 * 60 * 12; // 12 hours
// Do DNS lookups on IP addresses to get their hostname for the moderator IP pages (?/IP/x.x.x.x).
$config['mod']['dns_lookup'] = true;
// How many recent posts, per board, to show in ?/IP/x.x.x.x.
$config['mod']['ip_recentposts'] = 5;
// Number of posts to display on the reports page.
$config['mod']['recent_reports'] = 10;
// Number of actions to show per page in the moderation log.
$config['mod']['modlog_page'] = 350;
// Number of bans to show per page in the ban list.
$config['mod']['banlist_page'] = 350;
// Number of news entries to display per page.
$config['mod']['news_page'] = 40;
// Number of results to display per page.
$config['mod']['search_page'] = 200;
// Number of entries to show per page in the moderator noticeboard.
$config['mod']['noticeboard_page'] = 50;
// Number of entries to summarize and display on the dashboard.
$config['mod']['noticeboard_dashboard'] = 5;
// Check public ban message by default.
$config['mod']['check_ban_message'] = false;
// Default public ban message. In public ban messages, %length% is replaced with "for x days" or
// "permanently" (with %LENGTH% being the uppercase equivalent).
$config['mod']['default_ban_message'] = _('USER WAS BANNED FOR THIS POST');
// $config['mod']['default_ban_message'] = 'USER WAS BANNED %LENGTH% FOR THIS POST';
// HTML to append to post bodies for public bans messages (where "%s" is the message).
$config['mod']['ban_message'] = '(%s)';
// When moving a thread to another board and choosing to keep a "shadow thread", an automated post (with
// a capcode) will be made, linking to the new location for the thread. "%s" will be replaced with a
// standard cross-board post citation (>>>/board/xxx)
$config['mod']['shadow_mesage'] = _('Moved to %s.');
// Capcode to use when posting the above message.
$config['mod']['shadow_capcode'] = 'Mod';
// Name to use when posting the above message. If false, $config['anonymous'] will be used.
$config['mod']['shadow_name'] = false;
// PHP time limit for ?/rebuild. A value of 0 should cause PHP to wait indefinitely.
$config['mod']['rebuild_timelimit'] = 0;
// PM snippet (for ?/inbox) length in characters.
$config['mod']['snippet_length'] = 75;
// Edit raw HTML in posts by default.
$config['mod']['raw_html_default'] = false;
// Automatically dismiss all reports regarding a thread when it is locked.
$config['mod']['dismiss_reports_on_lock'] = true;
// Replace ?/config with a simple text editor for editing inc/instance-config.php.
$config['mod']['config_editor_php'] = false;
/*
* ====================
* Mod permissions
* ====================
*/
// Probably best not to change this unless you are smart enough to figure out what you're doing. If you
// decide to change it, remember that it is impossible to redefinite/overwrite groups; you may only add
// new ones.
$config['mod']['groups'] = array(
10 => 'Janitor',
20 => 'Mod',
30 => 'Admin',
// 98 => 'God',
99 => 'Disabled'
);
// If you add stuff to the above, you'll need to call this function immediately after.
define_groups();
// Example: Adding a new permissions group.
// $config['mod']['groups'][0] = 'NearlyPowerless';
// define_groups();
// Capcode permissions.
$config['mod']['capcode'] = array(
// JANITOR => array('Janitor'),
MOD => array('Mod'),
ADMIN => true
);
// Example: Allow mods to post with "## Moderator" as well
// $config['mod']['capcode'][MOD][] = 'Moderator';
// Example: Allow janitors to post with any capcode
// $config['mod']['capcode'][JANITOR] = true;
// Set any of the below to "DISABLED" to make them unavailable for everyone.
// Don't worry about per-board moderators. Let all mods moderate any board.
$config['mod']['skip_per_board'] = false;
/* Post Controls */
// View IP addresses
$config['mod']['show_ip'] = MOD;
// Delete a post
$config['mod']['delete'] = JANITOR;
// Ban a user for a post
$config['mod']['ban'] = MOD;
// Ban and delete (one click; instant)
$config['mod']['bandelete'] = MOD;
// Remove bans
$config['mod']['unban'] = MOD;
// Spoiler image
$config['mod']['spoilerimage'] = JANITOR;
// Edit bans
$config['mod']['edit_ban'] = &$config['mod']['ban'];
// Delete file (and keep post)
$config['mod']['deletefile'] = JANITOR;
// Delete all posts by IP
$config['mod']['deletebyip'] = MOD;
// Delete all posts by IP across all boards
$config['mod']['deletebyip_global'] = ADMIN;
// Sticky a thread
$config['mod']['sticky'] = MOD;
// Cycle a thread
$config['mod']['cycle'] = MOD;
$config['cycle_limit'] = &$config['reply_limit'];
// Lock a thread
$config['mod']['lock'] = MOD;
// Post in a locked thread
$config['mod']['postinlocked'] = MOD;
// Prevent a thread from being bumped
$config['mod']['bumplock'] = MOD;
// View whether a thread has been bumplocked ("-1" to allow non-mods to see too)
$config['mod']['view_bumplock'] = MOD;
// Edit posts
$config['mod']['editpost'] = ADMIN;
// "Move" a thread to another board (EXPERIMENTAL; has some known bugs)
$config['mod']['move'] = DISABLED;
// Bypass "field_disable_*" (forced anonymity, etc.)
$config['mod']['bypass_field_disable'] = MOD;
// Post bypass unoriginal content check on robot-enabled boards
$config['mod']['postunoriginal'] = ADMIN;
// Bypass flood check
$config['mod']['bypass_filters'] = ADMIN;
$config['mod']['flood'] = &$config['mod']['bypass_filters'];
// Raw HTML posting
$config['mod']['rawhtml'] = ADMIN;
/* Administration */
// View the report queue
$config['mod']['reports'] = JANITOR;
// Dismiss an abuse report
$config['mod']['report_dismiss'] = JANITOR;
// Dismiss all abuse reports by an IP
$config['mod']['report_dismiss_ip'] = JANITOR;
// Dismiss all abuse reports for a post
$config['mod']['report_dismiss_post'] = JANITOR;
// View list of bans
$config['mod']['view_banlist'] = MOD;
// View the username of the mod who made a ban
$config['mod']['view_banstaff'] = MOD;
// If the moderator doesn't fit the $config['mod']['view_banstaff''] (previous) permission, show him just
// a "?" instead. Otherwise, it will be "Mod" or "Admin".
$config['mod']['view_banquestionmark'] = false;
// Show expired bans in the ban list (they are kept in cache until the culprit returns)
$config['mod']['view_banexpired'] = true;
// View ban for IP address
$config['mod']['view_ban'] = $config['mod']['view_banlist'];
// View IP address notes
$config['mod']['view_notes'] = JANITOR;
// Create notes
$config['mod']['create_notes'] = $config['mod']['view_notes'];
// Remote notes
$config['mod']['remove_notes'] = ADMIN;
// Create a new board
$config['mod']['newboard'] = ADMIN;
// Manage existing boards (change title, etc)
$config['mod']['manageboards'] = ADMIN;
// Delete a board
$config['mod']['deleteboard'] = ADMIN;
// List/manage users
$config['mod']['manageusers'] = MOD;
// Promote/demote users
$config['mod']['promoteusers'] = ADMIN;
// Edit any users' login information
$config['mod']['editusers'] = ADMIN;
// Change user's own password
$config['mod']['change_password'] = JANITOR;
// Delete a user
$config['mod']['deleteusers'] = ADMIN;
// Create a user
$config['mod']['createusers'] = ADMIN;
// View the moderation log
$config['mod']['modlog'] = ADMIN;
// View IP addresses of other mods in ?/log
$config['mod']['show_ip_modlog'] = ADMIN;
// View relevant moderation log entries on IP address pages (ie. ban history, etc.) Warning: Can be
// pretty resource intensive if your mod logs are huge.
$config['mod']['modlog_ip'] = MOD;
// Create a PM (viewing mod usernames)
$config['mod']['create_pm'] = JANITOR;
// Read any PM, sent to or from anybody
$config['mod']['master_pm'] = ADMIN;
// Rebuild everything
$config['mod']['rebuild'] = ADMIN;
// Search through posts, IP address notes and bans
$config['mod']['search'] = JANITOR;
// Allow searching posts (can be used with board configuration file to disallow searching through a
// certain board)
$config['mod']['search_posts'] = JANITOR;
// Read the moderator noticeboard
$config['mod']['noticeboard'] = JANITOR;
// Post to the moderator noticeboard
$config['mod']['noticeboard_post'] = MOD;
// Delete entries from the noticeboard
$config['mod']['noticeboard_delete'] = ADMIN;
// Public ban messages; attached to posts
$config['mod']['public_ban'] = MOD;
// Manage and install themes for homepage
$config['mod']['themes'] = ADMIN;
// Post news entries
$config['mod']['news'] = ADMIN;
// Custom name when posting news
$config['mod']['news_custom'] = ADMIN;
// Delete news entries
$config['mod']['news_delete'] = ADMIN;
// Execute un-filtered SQL queries on the database (?/debug/sql)
$config['mod']['debug_sql'] = DISABLED;
// Edit the current configuration (via web interface)
$config['mod']['edit_config'] = ADMIN;
// View ban appeals
$config['mod']['view_ban_appeals'] = MOD;
// Accept and deny ban appeals
$config['mod']['ban_appeals'] = MOD;
// View the recent posts page
$config['mod']['recent'] = MOD;
// Create pages
$config['mod']['edit_pages'] = MOD;
$config['pages_max'] = 10;
// Config editor permissions
$config['mod']['config'] = array();
// Disable the following configuration variables from being changed via ?/config. The following default
// banned variables are considered somewhat dangerous.
$config['mod']['config'][DISABLED] = array(
'mod>config',
'mod>config_editor_php',
'mod>groups',
'convert_args',
'db>password',
);
$config['mod']['config'][JANITOR] = array(
'!', // Allow editing ONLY the variables listed (in this case, nothing).
);
$config['mod']['config'][MOD] = array(
'!', // Allow editing ONLY the variables listed (plus that in $config['mod']['config'][JANITOR]).
'global_message',
);
// Example: Disallow ADMIN from editing (and viewing) $config['db']['password'].
// $config['mod']['config'][ADMIN] = array(
// 'db>password',
// );
// Example: Allow ADMIN to edit anything other than $config['db']
// (and $config['mod']['config'][DISABLED]).
// $config['mod']['config'][ADMIN] = array(
// 'db',
// );
// Allow OP to remove arbitrary posts in his thread
$config['user_moderation'] = false;
// File board. Like 4chan /f/
$config['file_board'] = false;
// Thread tags. Set to false to disable
// Example: array('A' => 'Chinese cartoons', 'M' => 'Music', 'P' => 'Pornography');
$config['allowed_tags'] = false;
/*
* ====================
* Public pages
* ====================
*/
// Public post search settings
$config['search'] = array();
// Enable the search form
$config['search']['enable'] = false;
// Enable search in the board index.
$config['board_search'] = false;
// Maximal number of queries per IP address per minutes
$config['search']['queries_per_minutes'] = Array(15, 2);
// Global maximal number of queries per minutes
$config['search']['queries_per_minutes_all'] = Array(50, 2);
// Limit of search results
$config['search']['search_limit'] = 100;
// Boards for searching
//$config['search']['boards'] = array('a', 'b', 'c', 'd', 'e');
// Enable public logs? 0: NO, 1: YES, 2: YES, but drop names
$config['public_logs'] = 0;
/*
* ====================
* Events (PHP 5.3.0+)
* ====================
*/
// https://github.com/vichan-devel/vichan/wiki/events
// event_handler('post', function($post) {
// // do something
// });
// event_handler('post', function($post) {
// // do something else
//
// // return an error (reject post)
// return 'Sorry, you cannot post that!';
// });
/*
* =============
* API settings
* =============
*/
// Whether or not to enable the 4chan-compatible API, disabled by default. See
// https://github.com/4chan/4chan-API for API specification.
$config['api']['enabled'] = true;
// Extra fields in to be shown in the array that are not in the 4chan-API. You can get these by taking a
// look at the schema for posts_ tables. The array should be formatted as $db_column => $translated_name.
// Example: Adding the pre-markup post body to the API as "com_nomarkup".
// $config['api']['extra_fields'] = array('body_nomarkup' => 'com_nomarkup');
/*
* ==================
* NNTPChan settings
* ==================
*/
/*
* Please keep in mind that NNTPChan support in vichan isn't finished yet / is in an experimental
* state. Please join #nntpchan on Rizon in order to peer with someone.
*/
$config['nntpchan'] = array();
// Enable NNTPChan integration
$config['nntpchan']['enabled'] = false;
// NNTP server
$config['nntpchan']['server'] = "localhost:1119";
// Global dispatch array. Add your boards to it to enable them. Please make
// sure that this setting is set in a global context.
$config['nntpchan']['dispatch'] = array(); // 'overchan.test' => 'test'
// Trusted peer - an IP address of your NNTPChan instance. This peer will have
// increased capabilities, eg.: will evade spamfilter.
$config['nntpchan']['trusted_peer'] = '127.0.0.1';
// Salt for message ID generation. Keep it long and secure.
$config['nntpchan']['salt'] = 'change_me+please';
// A local message ID domain. Make sure to change it.
$config['nntpchan']['domain'] = 'example.vichan.net';
// An NNTPChan group name.
// Please set this setting in your board/config.php, not globally.
$config['nntpchan']['group'] = false; // eg. 'overchan.test'
/*
* ====================
* Other/uncategorized
* ====================
*/
// Meta keywords. It's probably best to include these in per-board configurations.
// $config['meta_keywords'] = 'chan,anonymous discussion,imageboard,vichan';
// Link imageboard to your Google Analytics account to track users and provide traffic insights.
// $config['google_analytics'] = 'UA-xxxxxxx-yy';
// Keep the Google Analytics cookies to one domain -- ga._setDomainName()
// $config['google_analytics_domain'] = 'www.example.org';
// Link imageboard to your Statcounter.com account to track users and provide traffic insights without the Google botnet.
// Extract these values from Statcounter's JS tracking code:
// $config['statcounter_project'] = '1234567';
// $config['statcounter_security'] = 'acbd1234';
// If you use Varnish, Squid, or any similar caching reverse-proxy in front of vichan, you can
// configure vichan to PURGE files when they're written to.
// $config['purge'] = array(
// array('127.0.0.1', 80)
// array('127.0.0.1', 80, 'example.org')
// );
// Connection timeout for $config['purge'], in seconds.
$config['purge_timeout'] = 3;
// Additional mod.php?/ pages. Look in inc/mod/pages.php for help.
// $config['mod']['custom_pages']['/something/(\d+)'] = function($id) {
// global $config;
// if (!hasPermission($config['mod']['something']))
// error($config['error']['noaccess']);
// // ...
// };
// You can also enable themes (like ukko) in mod panel like this:
// require_once("templates/themes/ukko/theme.php");
//
// $config['mod']['custom_pages']['/\*/'] = function() {
// global $mod;
//
// $ukko = new ukko();
// $ukko->settings = array();
// $ukko->settings['uri'] = '*';
// $ukko->settings['title'] = 'derp';
// $ukko->settings['subtitle'] = 'derpity';
// $ukko->settings['thread_limit'] = 15;
// $ukko->settings['exclude'] = '';
//
// echo $ukko->build($mod);
// };
// Example: Add links to dashboard (will all be in a new "Other" category).
// $config['mod']['dashboard_links']['Something'] = '?/something';
// Create gzipped static files along with ungzipped.
// This is useful with nginx with gzip_static on.
$config['gzip_static'] = false;
// Regex for board URIs. Don't add "`" character or any Unicode that MySQL can't handle. 58 characters
// is the absolute maximum, because MySQL cannot handle table names greater than 64 characters.
$config['board_regex'] = '[0-9a-zA-Z$_\x{0080}-\x{FFFF}]{1,58}';
// Youtube.js embed HTML code
$config['youtube_js_html'] = '
';
// Password hashing function
//
// $5$ <- SHA256
// $6$ <- SHA512
//
// 25000 rounds make for ~0.05s on my 2015 Core i3 computer.
//
// https://secure.php.net/manual/en/function.crypt.php
$config['password_crypt'] = '$6$rounds=25000$';
// Password hashing method version
// If set to 0, it won't upgrade hashes using old password encryption schema, only create new.
// You can set it to a higher value, to further migrate to other password hashing function.
$config['password_crypt_version'] = 1;
// Use CAPTCHA for reports?
$config['report_captcha'] = false;
// Allowed HTML tags in ?/edit_pages.
$config['allowed_html'] = 'a[href|title],p,br,li,ol,ul,strong,em,u,h2,b,i,tt,div,img[src|alt|title],hr';
// Secret passphrase for IP cloaking
// Disabled if empty.
$config['ipcrypt_key'] = '';
// IP cloak prefix
$config['ipcrypt_prefix'] = 'Cloak';
// Whether to append domain names to IP cloaks
$config['ipcrypt_dns'] = false;
'.
'
'.
'