1
0
mirror of https://github.com/vichan-devel/vichan.git synced 2024-12-13 00:01:16 +01:00
vichan/inc/config.php

1797 lines
72 KiB
PHP
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?php
/*
* Copyright (c) 2010-2013 Tinyboard Development Group
*
* WARNING: This is a project-wide configuration file and is overwritten when upgrading to a newer
* version of Tinyboard. Please leave this file unchanged, or it will be a lot harder for you to upgrade.
* If you would like to make instance-specific changes to your own setup, please use instance-config.php.
*
* This is the default configuration. You can copy values from here and use them in
* your instance-config.php
*
* You can also create per-board configuration files. Once a board is created, locate its directory and
* create a new file named config.php (eg. b/config.php). Like instance-config.php, you can copy values
* from here and use them in your per-board configuration files.
*
* Some directives are commented out. This is either because they are optional and examples, or because
* they are "optionally configurable", and given their default values by Tinyboard's code later if unset.
*
* More information: http://tinyboard.org/docs/?p=Config
*
* Tinyboard documentation: http://tinyboard.org/docs/
*
*/
defined('TINYBOARD') or exit;
/*
* =======================
* General/misc settings
* =======================
*/
// Global announcement -- the very simple version.
// This used to be wrongly named $config['blotter'] (still exists as an alias).
// $config['global_message'] = 'This is an important announcement!';
$config['blotter'] = &$config['global_message'];
// Shows some extra information at the bottom of pages. Good for development/debugging.
$config['debug'] = false;
// For development purposes. Displays (and "dies" on) all errors and warnings. Turn on with the above.
$config['verbose_errors'] = true;
// EXPLAIN all SQL queries (when in debug mode).
$config['debug_explain'] = false;
// Directory where temporary files will be created.
$config['tmp'] = sys_get_temp_dir();
// The HTTP status code to use when redirecting. http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
// Can be either 303 "See Other" or 302 "Found". (303 is more correct but both should work.)
// There is really no reason for you to ever need to change this.
$config['redirect_http'] = 303;
// A tiny text file in the main directory indicating that the script has been ran and the board(s) have
// been generated. This keeps the script from querying the database and causing strain when not needed.
$config['has_installed'] = '.installed';
// Use syslog() for logging all error messages and unauthorized login attempts.
$config['syslog'] = false;
// Use `host` via shell_exec() to lookup hostnames, avoiding query timeouts. May not work on your system.
// Requires safe_mode to be disabled.
$config['dns_system'] = false;
// Check validity of the reverse DNS of IP addresses. Highly recommended.
$config['fcrdns'] = true;
// When executing most command-line tools (such as `convert` for ImageMagick image processing), add this
// to the environment path (seperated by :).
$config['shell_path'] = '/usr/local/bin';
/*
* ====================
* Database settings
* ====================
*/
// Database driver (http://www.php.net/manual/en/pdo.drivers.php)
// Only MySQL is supported by Tinyboard at the moment, sorry.
$config['db']['type'] = 'mysql';
// Hostname, IP address or Unix socket (prefixed with ":")
$config['db']['server'] = 'localhost';
// Example: Unix socket
// $config['db']['server'] = ':/tmp/mysql.sock';
// Login
$config['db']['user'] = '';
$config['db']['password'] = '';
// Tinyboard database
$config['db']['database'] = '';
// Table prefix (optional)
$config['db']['prefix'] = '';
// Use a persistent database connection when possible
$config['db']['persistent'] = false;
// Anything more to add to the DSN string (eg. port=xxx;foo=bar)
$config['db']['dsn'] = '';
// Connection timeout duration in seconds
$config['db']['timeout'] = 30;
/*
* ====================
* Cache settings
* ====================
*/
/*
* On top of the static file caching system, you can enable the additional caching system which is
* designed to minimize SQL queries and can significantly increase speed when posting or using the
* moderator interface. APC is the recommended method of caching.
*
* http://tinyboard.org/docs/index.php?p=Config/Cache
*/
$config['cache']['enabled'] = false;
// $config['cache']['enabled'] = 'xcache';
// $config['cache']['enabled'] = 'apc';
// $config['cache']['enabled'] = 'memcached';
// $config['cache']['enabled'] = 'redis';
// Timeout for cached objects such as posts and HTML.
$config['cache']['timeout'] = 60 * 60 * 48; // 48 hours
// Optional prefix if you're running multiple Tinyboard instances on the same machine.
$config['cache']['prefix'] = '';
// Memcached servers to use. Read more: http://www.php.net/manual/en/memcached.addservers.php
$config['cache']['memcached'] = array(
array('localhost', 11211)
);
// Redis server to use. Location, port, password, database id.
// Note that Tinyboard may clear the database at times, so you may want to pick a database id just for
// Tinyboard to use.
$config['cache']['redis'] = array('localhost', 6379, '', 1);
// EXPERIMENTAL: Should we cache configs? Warning: this changes board behaviour, i'd say, a lot.
// If you have any lambdas/includes present in your config, you should move them to instance-functions.php
// (this file will be explicitly loaded during cache hit, but not during cache miss).
$config['cache_config'] = false;
/*
* ====================
* Cookie settings
* ====================
*/
// Used for moderation login.
$config['cookies']['mod'] = 'mod';
// Used for communicating with Javascript; telling it when posts were successful.
$config['cookies']['js'] = 'serv';
// Cookies path. Defaults to $config['root']. If $config['root'] is a URL, you need to set this. Should
// be '/' or '/board/', depending on your installation.
// $config['cookies']['path'] = '/';
// Where to set the 'path' parameter to $config['cookies']['path'] when creating cookies. Recommended.
$config['cookies']['jail'] = true;
// How long should the cookies last (in seconds). Defines how long should moderators should remain logged
// in (0 = browser session).
$config['cookies']['expire'] = 60 * 60 * 24 * 30 * 6; // ~6 months
// Make this something long and random for security.
$config['cookies']['salt'] = 'abcdefghijklmnopqrstuvwxyz09123456789!@#$%^&*()';
// Whether or not you can access the mod cookie in JavaScript. Most users should not need to change this.
$config['cookies']['httponly'] = true;
// Used to salt secure tripcodes ("##trip") and poster IDs (if enabled).
$config['secure_trip_salt'] = ')(*&^%$#@!98765432190zyxwvutsrqponmlkjihgfedcba';
/*
* ====================
* Flood/spam settings
* ====================
*/
/*
* To further prevent spam and abuse, you can use DNS blacklists (DNSBL). A DNSBL is a list of IP
* addresses published through the Internet Domain Name Service (DNS) either as a zone file that can be
* used by DNS server software, or as a live DNS zone that can be queried in real-time.
*
* Read more: http://tinyboard.org/docs/?p=Config/DNSBL
*/
// Prevents most Tor exit nodes from making posts. Recommended, as a lot of abuse comes from Tor because
// of the strong anonymity associated with it.
$config['dnsbl'][] = array('exitnodes.tor.dnsbl.sectoor.de', 1);
// http://www.sorbs.net/using.shtml
// $config['dnsbl'][] = array('dnsbl.sorbs.net', array(2, 3, 4, 5, 6, 7, 8, 9));
// http://www.projecthoneypot.org/httpbl.php
// $config['dnsbl'][] = array('<your access key>.%.dnsbl.httpbl.org', function($ip) {
// $octets = explode('.', $ip);
//
// // days since last activity
// if ($octets[1] > 14)
// return false;
//
// // "threat score" (http://www.projecthoneypot.org/threat_info.php)
// if ($octets[2] < 5)
// return false;
//
// return true;
// }, 'dnsbl.httpbl.org'); // hide our access key
// Skip checking certain IP addresses against blacklists (for troubleshooting or whatever)
$config['dnsbl_exceptions'][] = '127.0.0.1';
/*
* Introduction to Tinyboard's spam filter:
*
* In simple terms, whenever a posting form on a page is generated (which happens whenever a
* post is made), Tinyboard will add a random amount of hidden, obscure fields to it to
* confuse bots and upset hackers. These fields and their respective obscure values are
* validated upon posting with a 160-bit "hash". That hash can only be used as many times
* as you specify; otherwise, flooding bots could just keep reusing the same hash.
* Once a new set of inputs (and the hash) are generated, old hashes for the same thread
* and board are set to expire. Because you have to reload the page to get the new set
* of inputs and hash, if they expire too quickly and more than one person is viewing the
* page at a given time, Tinyboard would return false positives (depending on how long the
* user sits on the page before posting). If your imageboard is quite fast/popular, set
* $config['spam']['hidden_inputs_max_pass'] and $config['spam']['hidden_inputs_expire'] to
* something higher to avoid false positives.
*
* See also: http://tinyboard.org/docs/?p=Your_request_looks_automated
*
*/
// Number of hidden fields to generate.
$config['spam']['hidden_inputs_min'] = 4;
$config['spam']['hidden_inputs_max'] = 12;
// How many times can a "hash" be used to post?
$config['spam']['hidden_inputs_max_pass'] = 12;
// How soon after regeneration do hashes expire (in seconds)?
$config['spam']['hidden_inputs_expire'] = 60 * 60 * 3; // three hours
// Whether to use Unicode characters in hidden input names and values.
$config['spam']['unicode'] = true;
// These are fields used to confuse the bots. Make sure they aren't actually used by Tinyboard, or it won't work.
$config['spam']['hidden_input_names'] = array(
'user',
'username',
'login',
'search',
'q',
'url',
'firstname',
'lastname',
'text',
'message'
);
// Always update this when adding new valid fields to the post form, or EVERYTHING WILL BE DETECTED AS SPAM!
$config['spam']['valid_inputs'] = array(
'hash',
'board',
'thread',
'mod',
'name',
'email',
'subject',
'post',
'body',
'password',
'sticky',
'lock',
'raw',
'embed',
'recaptcha_challenge_field',
'recaptcha_response_field',
'captcha_cookie',
'captcha_text',
'spoiler',
'page',
'file_url',
'json_response',
'user_flag',
'no_country',
'tag'
);
/* Uses are you a human to stop automated requests to make boards disabled by default
* if you wish to use 'are you a human' to block automated board creation requests
* to use AYAH you must enter your 'AYAH_PUBLISHER_KEY' and your 'AYAH_SCORING_KEY' in
* the configuration file for AYAH. The config file for AYAH
* is located in the following directory:'/inc/lib/ayah/ayah_config.php'
*/
$config['ayah_enabled'] = false;
// Enable reCaptcha to make spam even harder. Rarely necessary.
$config['recaptcha'] = false;
// Enable reCaptcha on create.php to prevent automated requests.
$config['cbRecaptcha'] = false;
// Public and private key pair from https://www.google.com/recaptcha/admin/create
$config['recaptcha_public'] = '6LcXTcUSAAAAAKBxyFWIt2SO8jwx4W7wcSMRoN3f';
$config['recaptcha_private'] = '6LcXTcUSAAAAAOGVbVdhmEM1_SyRF4xTKe8jbzf_';
$config['captcha'] = array();
// Enable custom captcha provider
$config['captcha']['enabled'] = false;
// Custom CAPTCHA provider general settings
// Captcha expiration:
$config['captcha']['expires_in'] = 120; // 120 seconds
// Captcha length:
$config['captcha']['length'] = 6;
/*
* Custom captcha provider path (You will need to change these depending on your configuration! It cannot be
* automatically determined because provider_check requires curl which needs to know the domain of your site.)
*
* Specify yourimageboard.com/$config['root']/8chan-captcha/entrypoint.php for the default provider or write your own
*/
$config['captcha']['provider_get'] = 'http://localhost/8chan-captcha/entrypoint.php';
$config['captcha']['provider_check'] = 'http://localhost/8chan-captcha/entrypoint.php';
// Custom captcha extra field (eg. charset)
$config['captcha']['extra'] = 'abcdefghijklmnopqrstuvwxyz';
/*
* Custom filters detect certain posts and reject/ban accordingly. They are made up of a condition and an
* action (for when ALL conditions are met). As every single post has to be put through each filter,
* having hundreds probably isn't ideal as it could slow things down.
*
* By default, the custom filters array is populated with basic flood prevention conditions. This
* includes forcing users to wait at least 5 seconds between posts. To disable (or amend) these flood
* prevention settings, you will need to empty the $config['filters'] array first. You can do so by
* adding "$config['filters'] = array();" to inc/instance-config.php. Basic flood prevention used to be
* controlled solely by config variables such as $config['flood_time'] and $config['flood_time_ip'], and
* it still is, as long as you leave the relevant $config['filters'] intact. These old config variables
* still exist for backwards-compatability and general convenience.
*
* Read more: http://tinyboard.org/docs/index.php?p=Config/Filters
*/
// Minimum time between between each post by the same IP address.
$config['flood_time'] = 10;
// Minimum time between between each post with the exact same content AND same IP address.
$config['flood_time_ip'] = 120;
// Same as above but by a different IP address. (Same content, not necessarily same IP address.)
$config['flood_time_same'] = 30;
// Minimum time between posts by the same IP address (all boards).
$config['filters'][] = array(
'condition' => array(
'flood-match' => array('ip'), // Only match IP address
'flood-time' => &$config['flood_time']
),
'action' => 'reject',
'message' => &$config['error']['flood']
);
// Minimum time between posts by the same IP address with the same text.
$config['filters'][] = array(
'condition' => array(
'flood-match' => array('ip', 'body'), // Match IP address and post body
'flood-time' => &$config['flood_time_ip'],
'!body' => '/^$/', // Post body is NOT empty
),
'action' => 'reject',
'message' => &$config['error']['flood']
);
// Minimum time between posts with the same text. (Same content, but not always the same IP address.)
/*$config['filters'][] = array(
'condition' => array(
'flood-match' => array('body'), // Match only post body
'flood-time' => &$config['flood_time_same'],
'!body' => '/^$/', // Post body is NOT empty
),
'action' => 'reject',
'message' => &$config['error']['flood']
);*/
// Example: Minimum time between posts with the same file hash.
// $config['filters'][] = array(
// 'condition' => array(
// 'flood-match' => array('file'), // Match file hash
// 'flood-time' => 60 * 2 // 2 minutes minimum
// ),
// 'action' => 'reject',
// 'message' => &$config['error']['flood']
// );
// Example: Use the "flood-count" condition to only match if the user has made at least two posts with
// the same content and IP address in the past 2 minutes.
// $config['filters'][] = array(
// 'condition' => array(
// 'flood-match' => array('ip', 'body'), // Match IP address and post body
// 'flood-time' => 60 * 2, // 2 minutes
// 'flood-count' => 2 // At least two recent posts
// ),
// '!body' => '/^$/',
// 'action' => 'reject',
// 'message' => &$config['error']['flood']
// );
// Example: Blocking an imaginary known spammer, who keeps posting a reply with the name "surgeon",
// ending his posts with "regards, the surgeon" or similar.
// $config['filters'][] = array(
// 'condition' => array(
// 'name' => '/^surgeon$/',
// 'body' => '/regards,\s+(the )?surgeon$/i',
// 'OP' => false
// ),
// 'action' => 'reject',
// 'message' => 'Go away, spammer.'
// );
// Example: Same as above, but issuing a 3-hour ban instead of just reject the post and
// add an IP note with the message body
// $config['filters'][] = array(
// 'condition' => array(
// 'name' => '/^surgeon$/',
// 'body' => '/regards,\s+(the )?surgeon$/i',
// 'OP' => false
// ),
// 'action' => 'ban',
// 'add_note' => true,
// 'expires' => 60 * 60 * 3, // 3 hours
// 'reason' => 'Go away, spammer.'
// );
// Example: PHP 5.3+ (anonymous functions)
// There is also a "custom" condition, making the possibilities of this feature pretty much endless.
// This is a bad example, because there is already a "name" condition built-in.
// $config['filters'][] = array(
// 'condition' => array(
// 'body' => '/h$/i',
// 'OP' => false,
// 'custom' => function($post) {
// if($post['name'] == 'Anonymous')
// return true;
// else
// return false;
// }
// ),
// 'action' => 'reject'
// );
// Filter flood prevention conditions ("flood-match") depend on a table which contains a cache of recent
// posts across all boards. This table is automatically purged of older posts, determining the maximum
// "age" by looking at each filter. However, when determining the maximum age, Tinyboard does not look
// outside the current board. This means that if you have a special flood condition for a specific board
// (contained in a board configuration file) which has a flood-time greater than any of those in the
// global configuration, you need to set the following variable to the maximum flood-time condition value.
// $config['flood_cache'] = 60 * 60 * 24; // 24 hours
/*
* ====================
* Post settings
* ====================
*/
//New thread captcha
//Require solving a captcha to post a thread.
//Default off.
$config['new_thread_capt'] = false;
// Do you need a body for your reply posts?
$config['force_body'] = false;
// Do you need a user or country flag for your posts?
$config['force_flag'] = false;
// Do you need a body for new threads?
$config['force_body_op'] = true;
// Require an image for threads?
$config['force_image_op'] = true;
// Require a subject for threads?
$config['force_subject_op'] = false;
// Strip superfluous new lines at the end of a post.
$config['strip_superfluous_returns'] = true;
// Strip combining characters from Unicode strings (eg. "Zalgo").
$config['strip_combining_chars'] = true;
// Maximum post body length.
$config['max_body'] = 1800;
// Maximum number of newlines. (0 for unlimited)
$config['max_newlines'] = 0;
// Maximum number of post body lines to show on the index page.
$config['body_truncate'] = 15;
// Maximum number of characters to show on the index page.
$config['body_truncate_char'] = 2500;
// Typically spambots try to post many links. Refuse a post with X links?
$config['max_links'] = 20;
// Maximum number of cites per post (prevents abuse, as more citations mean more database queries).
$config['max_cites'] = 45;
// Maximum number of cross-board links/citations per post.
$config['max_cross'] = $config['max_cites'];
// Track post citations (>>XX). Rebuilds posts after a cited post is deleted, removing broken links.
// Puts a little more load on the database.
$config['track_cites'] = true;
// Maximum filename length (will be truncated).
$config['max_filename_len'] = 255;
// Maximum filename length to display (the rest can be viewed upon mouseover).
$config['max_filename_display'] = 30;
// Allow users to delete their own posts?
$config['allow_delete'] = true;
// How long after posting should you have to wait before being able to delete that post? (In seconds.)
$config['delete_time'] = 10;
// Reply limit (stops bumping thread when this is reached).
$config['reply_limit'] = 250;
// Image hard limit (stops allowing new image replies when this is reached if not zero).
$config['image_hard_limit'] = 0;
// Reply hard limit (stops allowing new replies when this is reached if not zero).
$config['reply_hard_limit'] = 0;
$config['robot_enable'] = false;
// Strip repeating characters when making hashes.
$config['robot_strip_repeating'] = true;
// Enabled mutes? Tinyboard uses ROBOT9000's original 2^x implementation where x is the number of times
// you have been muted in the past.
$config['robot_mute'] = true;
// How long before Tinyboard forgets about a mute?
$config['robot_mute_hour'] = 336; // 2 weeks
// If you want to alter the algorithm a bit. Default value is 2.
$config['robot_mute_multiplier'] = 2; // (n^x where x is the number of previous mutes)
$config['robot_mute_descritpion'] = _('You have been muted for unoriginal content.');
// Automatically convert things like "..." to Unicode characters ("…").
$config['auto_unicode'] = true;
// Whether to turn URLs into functional links.
$config['markup_urls'] = true;
// Optional URL prefix for links (eg. "http://anonym.to/?").
$config['link_prefix'] = '';
$config['url_ads'] = &$config['link_prefix']; // leave alias
// Allow "uploading" images via URL as well. Users can enter the URL of the image and then Tinyboard will
// download it. Not usually recommended.
$config['allow_upload_by_url'] = false;
// The timeout for the above, in seconds.
$config['upload_by_url_timeout'] = 15;
// A wordfilter (sometimes referred to as just a "filter" or "censor") automatically scans users posts
// as they are submitted and changes or censors particular words or phrases.
// For a normal string replacement:
// $config['wordfilters'][] = array('cat', 'dog');
// Advanced raplcement (regular expressions):
// $config['wordfilters'][] = array('/ca[rt]/', 'dog', true); // 'true' means it's a regular expression
// Always act as if the user had typed "noko" into the email field.
$config['always_noko'] = false;
// Example: Custom tripcodes. The below example makes a tripcode of "#test123" evaluate to "!HelloWorld".
// $config['custom_tripcode']['#test123'] = '!HelloWorld';
// Example: Custom secure tripcode.
// $config['custom_tripcode']['##securetrip'] = '!!somethingelse';
// Allow users to mark their image as a "spoiler" when posting. The thumbnail will be replaced with a
// static spoiler image instead (see $config['spoiler_image']).
$config['spoiler_images'] = false;
// With the following, you can disable certain superfluous fields or enable "forced anonymous".
// When true, all names will be set to $config['anonymous'].
$config['field_disable_name'] = false;
// When true, there will be no email field.
$config['field_disable_email'] = false;
// When true, there will be no subject field.
$config['field_disable_subject'] = false;
// When true, there will be no subject field for replies.
$config['field_disable_reply_subject'] = &$config['field_disable_name'];
// When true, a blank password will be used for files (not usable for deletion).
$config['field_disable_password'] = false;
// When true, users are instead presented a selectbox for email. Contains, blank, noko and sage.
$config['field_email_selectbox'] = &$config['field_disable_name'];
// Prevent users from uploading files.
$config['disable_images'] = false;
// When true, the sage won't be displayed
$config['hide_sage'] = false;
// Attach country flags to posts.
$config['country_flags'] = false;
// Allow the user to decide whether or not he wants to display his country
$config['allow_no_country'] = false;
// Load all country flags from one file
$config['country_flags_condensed'] = true;
$config['country_flags_condensed_css'] = 'static/flags/flags.css';
// Allow the user choose a /pol/-like user_flag that will be shown in the post. For the user flags, please be aware
// that you will have to disable BOTH country_flags and contry_flags_condensed optimization (at least on a board
// where they are enabled).
$config['user_flag'] = false;
// List of user_flag the user can choose. Flags must be placed in the directory set by $config['uri_flags']
$config['user_flags'] = array();
/* example: 
$config['user_flags'] = array (
'nz' => 'Nazi',
'cm' => 'Communist',
'eu' => 'Europe'
);
*/
// Allow dice rolling: an email field of the form "dice XdY+/-Z" will result in X Y-sided dice rolled and summed,
// with the modifier Z added, with the result displayed at the top of the post body.
$config['allow_roll'] = false;
/*
* ====================
* Ban settings
* ====================
*/
// Require users to see the ban page at least once for a ban even if it has since expired.
$config['require_ban_view'] = true;
// Show the post the user was banned for on the "You are banned" page.
$config['ban_show_post'] = false;
// Optional HTML to append to "You are banned" pages. For example, you could include instructions and/or
// a link to an email address or IRC chat room to appeal the ban.
$config['ban_page_extra'] = '';
// Allow users to appeal bans through Tinyboard.
$config['ban_appeals'] = false;
// Do not allow users to appeal bans that are shorter than this length (in seconds).
$config['ban_appeals_min_length'] = 60 * 60 * 6; // 6 hours
// How many ban appeals can be made for a single ban?
$config['ban_appeals_max'] = 1;
// Blacklisted board names. Default values to protect existing folders in the core codebase.
$config['banned_boards'] = array(
'.git',
'inc',
'js',
'static',
'stylesheets',
'templates',
'tools'
);
// Show moderator name on ban page.
$config['show_modname'] = false;
/*
* ====================
* Markup settings
* ====================
*/
// JIS ASCII art. This *must* be the first markup or it won't work.
$config['markup'][] = array(
"/\[(aa|code)\](.+?)\[\/(?:aa|code)\]/ms",
function($matches) {
$markupchars = array('_', '\'', '~', '*', '=');
$replacement = $markupchars;
array_walk($replacement, function(&$v) {
$v = "&#".ord($v).";";
});
// These are hacky fixes for ###board-tags### and >quotes.
$markupchars[] = '###';
$replacement[] = '&#35;&#35;&#35;';
$markupchars[] = '&gt;';
$replacement[] = '&#62;';
if ($matches[1] === 'aa') {
return '<span class="aa">' . str_replace($markupchars, $replacement, $matches[2]) . '</span>';
} else {
return str_replace($markupchars, $replacement, $matches[0]);
}
}
);
// "Wiki" markup syntax ($config['wiki_markup'] in pervious versions):
$config['markup'][] = array("/'''(.+?)'''/", "<strong>\$1</strong>");
$config['markup'][] = array("/''(.+?)''/", "<em>\$1</em>");
$config['markup'][] = array("/\*\*(.+?)\*\*/", "<span class=\"spoiler\">\$1</span>");
$config['markup'][] = array("/^[ |\t]*==(.+?)==[ |\t]*$/m", "<span class=\"heading\">\$1</span>");
// Highlight PHP code wrapped in <code> tags (PHP 5.3+)
// $config['markup'][] = array(
// '/^&lt;code&gt;(.+)&lt;\/code&gt;/ms',
// function($matches) {
// return highlight_string(html_entity_decode($matches[1]), true);
// }
// );
// Repair markup with HTML Tidy. This may be slower, but it solves nesting mistakes. Tinyboad, at the
// time of writing this, can not prevent out-of-order markup tags (eg. "**''test**'') without help from
// HTML Tidy.
$config['markup_repair_tidy'] = false;
// Always regenerate markup. This isn't recommended and should only be used for debugging; by default,
// Tinyboard only parses post markup when it needs to, and keeps post-markup HTML in the database. This
// will significantly impact performance when enabled.
$config['always_regenerate_markup'] = false;
/*
* ====================
* Image settings
* ====================
*/
// Maximum number of images allowed. Increasing this number enabled multi image.
// If you make it more than 1, make sure to enable the below script for the post form to change.
// $config['additional_javascript'][] = 'js/multi_image.js';
$config['max_images'] = 1;
// Method to use for determing the max filesize.
// "split" means that your max filesize is split between the images. For example, if your max filesize
// is 2MB, the filesizes of all files must add up to 2MB for it to work.
// "each" means that each file can be 2MB, so if your max_images is 3, each post could contain 6MB of
// images. "split" is recommended.
$config['multiimage_method'] = 'split';
// For resizing, maximum thumbnail dimensions.
$config['thumb_width'] = 255;
$config['thumb_height'] = 255;
// Maximum thumbnail dimensions for thread (OP) images.
$config['thumb_op_width'] = 255;
$config['thumb_op_height'] = 255;
// Thumbnail extension ("png" recommended). Leave this empty if you want the extension to be inherited
// from the uploaded file.
$config['thumb_ext'] = 'png';
// Maximum amount of animated GIF frames to resize (more frames can mean more processing power). A value
// of "1" means thumbnails will not be animated. Requires $config['thumb_ext'] to be 'gif' (or blank) and
// $config['thumb_method'] to be 'imagick', 'convert', or 'convert+gifsicle'. This value is not
// respected by 'convert'; will just resize all frames if this is > 1.
$config['thumb_keep_animation_frames'] = 1;
/*
* Thumbnailing method:
*
* 'gd' PHP GD (default). Only handles the most basic image formats (GIF, JPEG, PNG).
* GD is a prerequisite for Tinyboard no matter what method you choose.
*
* 'imagick' PHP's ImageMagick bindings. Fast and efficient, supporting many image formats.
* A few minor bugs. http://pecl.php.net/package/imagick
*
* 'convert' The command line version of ImageMagick (`convert`). Fixes most of the bugs in
* PHP Imagick. `convert` produces the best still thumbnails and is highly recommended.
*
* 'gm' GraphicsMagick (`gm`) is a fork of ImageMagick with many improvements. It is more
* efficient and gets thumbnailing done using fewer resources.
*
* 'convert+gifscale'
* OR 'gm+gifsicle' Same as above, with the exception of using `gifsicle` (command line application)
* instead of `convert` for resizing GIFs. It's faster and resulting animated
* thumbnails have less artifacts than if resized with ImageMagick.
*/
$config['thumb_method'] = 'gd';
// $config['thumb_method'] = 'convert';
// Command-line options passed to ImageMagick when using `convert` for thumbnailing. Don't touch the
// placement of "%s" and "%d".
$config['convert_args'] = '-size %dx%d %s -thumbnail %dx%d -auto-orient +profile "*" %s';
// Strip EXIF metadata from JPEG files.
$config['strip_exif'] = false;
// Use the command-line `exiftool` tool to strip EXIF metadata without decompressing/recompressing JPEGs.
// Ignored when $config['redraw_image'] is true. This is also used to adjust the Orientation tag when
// $config['strip_exif'] is false and $config['convert_manual_orient'] is true.
$config['use_exiftool'] = false;
// Redraw the image to strip any excess data (commonly ZIP archives) WARNING: This might strip the
// animation of GIFs, depending on the chosen thumbnailing method. It also requires recompressing
// the image, so more processing power is required.
$config['redraw_image'] = false;
// Automatically correct the orientation of JPEG files using -auto-orient in `convert`. This only works
// when `convert` or `gm` is selected for thumbnailing. Again, requires more processing power because
// this basically does the same thing as $config['redraw_image']. (If $config['redraw_image'] is enabled,
// this value doesn't matter as $config['redraw_image'] attempts to correct orientation too.)
$config['convert_auto_orient'] = false;
// Is your version of ImageMagick or GraphicsMagick old? Older versions may not include the -auto-orient
// switch. This is a manual replacement for that switch. This is independent from the above switch;
// -auto-orrient is applied when thumbnailing too.
$config['convert_manual_orient'] = false;
// Regular expression to check for an XSS exploit with IE 6 and 7. To disable, set to false.
// Details: https://github.com/savetheinternet/Tinyboard/issues/20
$config['ie_mime_type_detection'] = '/<(?:body|head|html|img|plaintext|pre|script|table|title|a href|channel|scriptlet)/i';
// Config panel, fileboard: allowed upload extensions
$config['fileboard_allowed_types'] = array('zip', '7z', 'tar', 'gz', 'bz2', 'xz', 'swf', 'txt', 'pdf', 'torrent');
// Allowed image file extensions.
$config['allowed_ext'][] = 'jpg';
$config['allowed_ext'][] = 'jpeg';
$config['allowed_ext'][] = 'gif';
$config['allowed_ext'][] = 'png';
// $config['allowed_ext'][] = 'svg';
// Allowed extensions for OP. Inherits from the above setting if set to false. Otherwise, it overrides both allowed_ext and
// allowed_ext_files (filetypes for downloadable files should be set in allowed_ext_files as well). This setting is useful
// for creating fileboards.
$config['allowed_ext_op'] = false;
// Allowed additional file extensions (not images; downloadable files).
// $config['allowed_ext_files'][] = 'txt';
// $config['allowed_ext_files'][] = 'zip';
// An alternative function for generating image filenames, instead of the default UNIX timestamp.
// $config['filename_func'] = function($post) {
// return sprintf("%s", time() . substr(microtime(), 2, 3));
// };
// Thumbnail to use for the non-image file uploads.
$config['file_icons']['default'] = 'file.png';
$config['file_icons']['zip'] = 'zip.png';
$config['file_icons']['webm'] = 'video.png';
$config['file_icons']['mp4'] = 'video.png';
// Example: Custom thumbnail for certain file extension.
// $config['file_icons']['extension'] = 'some_file.png';
// Location of above images.
$config['file_thumb'] = 'static/%s';
// Location of thumbnail to use for spoiler images.
$config['spoiler_image'] = 'static/spoiler.png';
// Location of thumbnail to use for deleted images.
$config['image_deleted'] = 'static/deleted.png';
// Location of placeholder image for fileless posts in catalog.
$config['no_file_image'] = 'static/no-file.png';
// When a thumbnailed image is going to be the same (in dimension), just copy the entire file and use
// that as a thumbnail instead of resizing/redrawing.
$config['minimum_copy_resize'] = false;
// Maximum image upload size in bytes.
$config['max_filesize'] = 10 * 1024 * 1024; // 10MB
// Maximum image dimensions.
$config['max_width'] = 10000;
$config['max_height'] = $config['max_width'];
// Reject duplicate image uploads.
$config['image_reject_repost'] = true;
// Reject duplicate image uploads within the same thread. Doesn't change anything if
// $config['image_reject_repost'] is true.
$config['image_reject_repost_in_thread'] = false;
// Display the aspect ratio of uploaded files.
$config['show_ratio'] = false;
// Display the file's original filename.
$config['show_filename'] = true;
// WebM Settings
$config['webm']['use_ffmpeg'] = false;
$config['webm']['allow_audio'] = false;
$config['webm']['max_length'] = 120;
$config['webm']['ffmpeg_path'] = 'ffmpeg';
$config['webm']['ffprobe_path'] = 'ffprobe';
// Display image identification links for ImgOps, regex.info/exif, Google Images and iqdb.
$config['image_identification'] = false;
// Which of the identification links to display. Only works if $config['image_identification'] is true.
$config['image_identification_imgops'] = true;
$config['image_identification_exif'] = true;
$config['image_identification_google'] = true;
// Anime/manga search engine.
$config['image_identification_iqdb'] = false;
// Set this to true if you're using a BSD
$config['bsd_md5'] = false;
// Number of posts in a "View Last X Posts" page
$config['noko50_count'] = 50;
// Number of posts a thread needs before it gets a "View Last X Posts" page.
// Set to an arbitrarily large value to disable.
$config['noko50_min'] = 100;
/*
* ====================
* Board settings
* ====================
*/
// Maximum amount of threads to display per page.
$config['threads_per_page'] = 10;
// Maximum number of pages. Content past the last page is automatically purged.
$config['max_pages'] = 10;
// Replies to show per thread on the board index page.
$config['threads_preview'] = 5;
// Same as above, but for stickied threads.
$config['threads_preview_sticky'] = 1;
// How to display the URI of boards. Usually '/%s/' (/b/, /mu/, etc). This doesn't change the URL. Find
// $config['board_path'] if you wish to change the URL.
$config['board_abbreviation'] = '/%s/';
// The default name (ie. Anonymous). Can be an array - in that case it's picked randomly from the array.
// Example: $config['anonymous'] = array('Bernd', 'Senpai', 'Jonne', 'ChanPro');
$config['anonymous'] = 'Anonymous';
// Number of reports you can create at once.
$config['report_limit'] = 3;
// Allow unfiltered HTML in board subtitle. This is useful for placing icons and links.
$config['allow_subtitle_html'] = false;
/*
* ====================
* Display settings
* ====================
*/
// Tinyboard has been translated into a few langauges. See inc/locale for available translations.
$config['locale'] = 'en'; // (en, ru_RU.UTF-8, fi_FI.UTF-8, pl_PL.UTF-8)
// Timezone to use for displaying dates/tiems.
$config['timezone'] = 'America/Los_Angeles';
// The format string passed to strftime() for displaying dates.
// http://www.php.net/manual/en/function.strftime.php
$config['post_date'] = '%m/%d/%y (%a) %H:%M:%S';
// Same as above, but used for "you are banned' pages.
$config['ban_date'] = '%A %e %B, %Y';
// The names on the post buttons. (On most imageboards, these are both just "Post").
$config['button_newtopic'] = _('New Topic');
$config['button_reply'] = _('New Reply');
// Assign each poster in a thread a unique ID, shown by "ID: xxxxx" before the post number.
$config['poster_ids'] = false;
// Number of characters in the poster ID (maximum is 40).
$config['poster_id_length'] = 5;
// Show thread subject in page title.
$config['thread_subject_in_title'] = false;
// Additional lines added to the footer of all pages.
// $config['footer'][] = _('All trademarks, copyrights, comments, and images on this page are owned by and are the responsibility of their respective parties.');
// Characters used to generate a random password (with Javascript).
$config['genpassword_chars'] = 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789!@#$%^&*()_+';
// Optional banner image at the top of every page.
// $config['url_banner'] = '/banner.php';
// Banner dimensions are also optional. As the banner loads after the rest of the page, everything may be
// shifted down a few pixels when it does. Making the banner a fixed size will prevent this.
// $config['banner_width'] = 300;
// $config['banner_height'] = 100;
// Custom stylesheets available for the user to choose. See the "stylesheets/" folder for a list of
// available stylesheets (or create your own).
$config['stylesheets']['Yotsuba B'] = ''; // Default; there is no additional/custom stylesheet for this.
$config['stylesheets']['Yotsuba'] = 'yotsuba.css';
// $config['stylesheets']['Futaba'] = 'futaba.css';
// $config['stylesheets']['Dark'] = 'dark.css';
$config['stylesheets']['Tomorrow'] = 'tomorrow.css';
// The prefix for each stylesheet URI. Defaults to $config['root']/stylesheets/
// $config['uri_stylesheets'] = 'http://static.example.org/stylesheets/';
// The default stylesheet to use.
$config['default_stylesheet'] = array('Yotsuba B', $config['stylesheets']['Yotsuba B']);
// Make stylesheet selections board-specific.
$config['stylesheets_board'] = false;
// Use Font-Awesome for displaying lock and pin icons, instead of the images in static/.
// http://fortawesome.github.io/Font-Awesome/icon/pushpin/
// http://fortawesome.github.io/Font-Awesome/icon/lock/
$config['font_awesome'] = true;
$config['font_awesome_css'] = 'stylesheets/font-awesome/css/font-awesome.min.css';
/*
* For lack of a better name, “boardlinks” are those sets of navigational links that appear at the top
* and bottom of board pages. They can be a list of links to boards and/or other pages such as status
* blogs and social network profiles/pages.
*
* "Groups" in the boardlinks are marked with square brackets. Tinyboard allows for infinite recursion
* with groups. Each array() in $config['boards'] represents a new square bracket group.
*/
// $config['boards'] = array(
// array('a', 'b'),
// array('c', 'd', 'e', 'f', 'g'),
// array('h', 'i', 'j'),
// array('k', array('l', 'm')),
// array('status' => 'http://status.example.org/')
// );
// Whether or not to put brackets around the whole board list
$config['boardlist_wrap_bracket'] = false;
// Show page navigation links at the top as well.
$config['page_nav_top'] = false;
// Show "Catalog" link in page navigation. Use with the Catalog theme.
$config['catalog_link'] = 'catalog.html';
// Board categories. Only used in the "Categories" theme.
// $config['categories'] = array(
// 'Group Name' => array('a', 'b', 'c'),
// 'Another Group' => array('d')
// );
// Optional for the Categories theme. This is an array of name => (title, url) groups for categories
// with non-board links.
// $config['custom_categories'] = array(
// 'Links' => array(
// 'Tinyboard' => 'http://tinyboard.org',
// 'Donate' => 'donate.html'
// )
// );
// Automatically remove unnecessary whitespace when compiling HTML files from templates.
$config['minify_html'] = true;
/*
* Advertisement HTML to appear at the top and bottom of board pages.
*/
// $config['ad'] = array(
// 'top' => '',
// 'bottom' => '',
// );
// Display flags (when available). This config option has no effect unless poster flags are enabled (see
// $config['country_flags']). Disable this if you want all previously-assigned flags to be hidden.
$config['display_flags'] = true;
// Location of post flags/icons (where "%s" is the flag name). Defaults to static/flags/%s.png.
// $config['uri_flags'] = 'http://static.example.org/flags/%s.png';
// Width and height (and more?) of post flags. Can be overridden with the Tinyboard post modifier:
// <tinyboard flag style>.
// $config['flag_style'] = 'width:16px;height:11px;';
$config['flag_style'] = '';
/*
* ====================
* Javascript
* ====================
*/
// Additional Javascript files to include on board index and thread pages. See js/ for available scripts.
// $config['additional_javascript'][] = 'js/inline-expanding.js';
// $config['additional_javascript'][] = 'js/local-time.js';
// Some scripts require jQuery. Check the comments in script files to see what's needed. When enabling
// jQuery, you should first empty the array so that "js/query.min.js" can be the first, and then re-add
// "js/inline-expanding.js" or else the inline-expanding script might not interact properly with other
// scripts.
// $config['additional_javascript'] = array();
// $config['additional_javascript'][] = 'js/jquery.min.js';
// $config['additional_javascript'][] = 'js/inline-expanding.js';
// $config['additional_javascript'][] = 'js/auto-reload.js';
// $config['additional_javascript'][] = 'js/post-hover.js';
// $config['additional_javascript'][] = 'js/style-select.js';
// Where these script files are located on the web. Defaults to $config['root'].
// $config['additional_javascript_url'] = 'http://static.example.org/tinyboard-javascript-stuff/';
// Compile all additional scripts into one file ($config['file_script']) instead of including them seperately.
$config['additional_javascript_compile'] = false;
// Minify Javascript using http://code.google.com/p/minify/.
$config['minify_js'] = false;
/*
* ====================
* Video embedding
* ====================
*/
// Enable embedding (see below).
$config['enable_embedding'] = false;
// Youtube.js embed HTML code
$config['youtube_js_html'] = '<div class="video-container" data-video="$1" data-params="&$2&$3">'.
'<span class="unimportant yt-help">YouTube embed. Click thumbnail to play.</span><br>'.
'<a href="$0" target="_blank" class="file">'.
'<img style="width:255px" src="//img.youtube.com/vi/$1/0.jpg" class="post-image"/>'.
'</a></div>';
// Custom embedding (YouTube, vimeo, etc.)
// It's very important that you match the entire input (with ^ and $) or things will not work correctly.
$config['embedding'] = array(
array(
'/^https?:\/\/(?:\w+\.)?(?:youtube\.com\/watch\?|youtu\.be\/)(?:(?:&?v=)?([a-zA-Z0-9\-_]{10,11}))$/i',
$config['youtube_js_html']
),
);
// Embedding width and height.
$config['embed_width'] = 300;
$config['embed_height'] = 246;
/*
* ====================
* Error messages
* ====================
*/
// Error messages
$config['error']['bot'] = _('You look like a bot.');
$config['error']['referer'] = _('Your browser sent an invalid or no HTTP referer.');
$config['error']['toolong'] = _('The %s field was too long.');
$config['error']['toolong_body'] = _('The body was too long.');
$config['error']['tooshort_body'] = _('The body was too short or empty.');
$config['error']['noimage'] = _('You must upload an image.');
$config['error']['toomanyimages'] = _('You have attempted to upload too many images!');
$config['error']['nomove'] = _('The server failed to handle your upload.');
$config['error']['fileext'] = _('Unsupported image format.');
$config['error']['noboard'] = _('Invalid board!');
$config['error']['nonexistant'] = _('Thread specified does not exist.');
$config['error']['locked'] = _('Thread locked. You may not reply at this time.');
$config['error']['reply_hard_limit'] = _('Thread has reached its maximum reply limit.');
$config['error']['image_hard_limit'] = _('Thread has reached its maximum image limit.');
$config['error']['nopost'] = _('You didn\'t make a post.');
$config['error']['flood'] = _('Flood detected; Post discarded.');
$config['error']['spam'] = _('Your request looks automated; Post discarded. Try refreshing the page. If that doesn\'t work, please post the board, thread and browser this error occurred on on /operate/.');
$config['error']['unoriginal'] = _('Unoriginal content!');
$config['error']['muted'] = _('Unoriginal content! You have been muted for %d seconds.');
$config['error']['youaremuted'] = _('You are muted! Expires in %d seconds.');
$config['error']['dnsbl'] = _('Your IP address is listed in %s.');
$config['error']['toomanylinks'] = _('Too many links; flood detected.');
$config['error']['notenoughlinks'] = _('OPs are required to have at least %d links on this board.');
$config['error']['toomanycites'] = _('Too many cites; post discarded.');
$config['error']['toomanycross'] = _('Too many cross-board links; post discarded.');
$config['error']['nodelete'] = _('You didn\'t select anything to delete.');
$config['error']['noreport'] = _('You didn\'t select anything to report.');
$config['error']['toomanyreports'] = _('You can\'t report that many posts at once.');
$config['error']['invalidpassword'] = _('Wrong password…');
$config['error']['invalidimg'] = _('Invalid image.');
$config['error']['unknownext'] = _('Unknown file extension.');
$config['error']['filesize'] = _('Maximum file size: %maxsz% bytes<br>Your file\'s size: %filesz% bytes');
$config['error']['maxsize'] = _('The file was too big.');
$config['error']['genwebmerror'] = _('There was a problem processing your webm.');
$config['error']['webmerror'] = _('There was a problem processing your webm.');//Is this error used anywhere ?
$config['error']['invalidwebm'] = _('Invalid webm uploaded.');
$config['error']['webmhasaudio'] = _('The uploaded webm contains an audio or another type of additional stream.');
$config['error']['webmtoolong'] = _('The uploaded webm is longer than %d seconds.');
$config['error']['fileexists'] = _('That file <a href="%s">already exists</a>!');
$config['error']['fileexistsinthread'] = _('That file <a href="%s">already exists</a> in this thread!');
$config['error']['delete_too_soon'] = _('You\'ll have to wait another %s before deleting that.');
$config['error']['mime_exploit'] = _('MIME type detection XSS exploit (IE) detected; post discarded.');
$config['error']['invalid_embed'] = _('Couldn\'t make sense of the URL of the video you tried to embed.');
$config['error']['captcha'] = _('You seem to have mistyped the verification.');
$config['error']['images_disabled'] = _('Uploading files is disabled on this board.');
// mod.php errors
$config['error']['toomanyunban'] = _('You are only allowed to unban %s users at a time. You tried to unban %u users.');
$config['error']['invalid'] = _('Invalid username and/or password.');
$config['error']['notamod'] = _('You are not a mod…');
$config['error']['invalidafter'] = _('Invalid username and/or password. Your user may have been deleted or changed.');
$config['error']['malformed'] = _('Invalid/malformed cookies.');
$config['error']['missedafield'] = _('Your browser didn\'t submit an input when it should have.');
$config['error']['required'] = _('The %s field is required.');
$config['error']['invalidfield'] = _('The %s field was invalid.');
$config['error']['boardexists'] = _('There is already a %s board.');
$config['error']['noaccess'] = _('You don\'t have permission to do that.');
$config['error']['invalidpost'] = _('That post doesn\'t exist…');
$config['error']['404'] = _('Page not found.');
$config['error']['modexists'] = _('That mod <a href="?/users/%d">already exists</a>!');
$config['error']['invalidtheme'] = _('That theme doesn\'t exist!');
$config['error']['csrf'] = _('Invalid security token! Please go back and try again.');
$config['error']['badsyntax'] = _('Your code contained PHP syntax errors. Please go back and correct them. PHP says: ');
/*
* =========================
* Directory/file settings
* =========================
*/
// The root directory, including the trailing slash, for Tinyboard.
// Examples: '/', 'http://boards.chan.org/', '/chan/'.
if (isset($_SERVER['REQUEST_URI'])) {
$request_uri = $_SERVER['REQUEST_URI'];
if (isset($_SERVER['QUERY_STRING']) && $_SERVER['QUERY_STRING'] !== '')
$request_uri = substr($request_uri, 0, - 1 - strlen($_SERVER['QUERY_STRING']));
$config['root'] = str_replace('\\', '/', dirname($request_uri)) == '/'
? '/' : str_replace('\\', '/', dirname($request_uri)) . '/';
unset($request_uri);
} else
$config['root'] = '/'; // CLI mode
// The scheme and domain. This is used to get the site's absolute URL (eg. for image identification links).
// If you use the CLI tools, it would be wise to override this setting.
$config['domain'] = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] != 'off') ? 'https://' : 'http://';
$config['domain'] .= isset($_SERVER['HTTP_HOST']) ? $_SERVER['HTTP_HOST'] : 'localhost';
// If for some reason the folders and static HTML index files aren't in the current working direcotry,
// enter the directory path here. Otherwise, keep it false.
$config['root_file'] = false;
// Location of files.
$config['file_index'] = 'index.html';
$config['file_page'] = '%d.html';
$config['file_page50'] = '%d+50.html';
$config['file_mod'] = 'mod.php';
$config['file_post'] = 'post.php';
$config['file_script'] = 'main.js';
// Board directory, followed by a forward-slash (/).
$config['board_path'] = '%s/';
// Misc directories.
$config['dir']['img'] = 'src/';
$config['dir']['thumb'] = 'thumb/';
$config['dir']['res'] = 'res/';
// Images in a seperate directory - For CDN or media servers
// This is a particularly advanced feature - contact ctrlcctrlv or rails unless you
// really know what you're doing
$config['dir']['img_root'] = '';
// DO NOT COMMENT OUT, LEAVE BLANK AND OVERRIDE IN INSTANCE CONFIG
// Though, you shouldnt be editing this file, so what do I know?
// For load balancing, having a seperate server (and domain/subdomain) for serving static content is
// possible. This can either be a directory or a URL. Defaults to $config['root'] . 'static/'.
// $config['dir']['static'] = 'http://static.example.org/';
// Where to store the .html templates. This folder and the template files must exist.
$config['dir']['template'] = getcwd() . '/templates';
// Location of Tinyboard "themes".
$config['dir']['themes'] = getcwd() . '/templates/themes';
// Same as above, but a URI (accessable by web interface).
$config['dir']['themes_uri'] = 'templates/themes';
// Home directory. Used by themes.
$config['dir']['home'] = '';
// Location of a blank 1x1 gif file. Only used when country_flags_condensed is enabled
// $config['image_blank'] = 'static/blank.gif';
// Static images. These can be URLs OR base64 (data URI scheme). These are only used if
// $config['font_awesome'] is false (default).
// $config['image_sticky'] = 'static/sticky.png';
// $config['image_locked'] = 'static/locked.gif';
// $config['image_bumplocked'] = 'static/sage.png'.
// If you want to put images and other dynamic-static stuff on another (preferably cookieless) domain.
// This will override $config['root'] and $config['dir']['...'] directives. "%s" will get replaced with
// $board['dir'], which includes a trailing slash.
// $config['uri_thumb'] = 'http://images.example.org/%sthumb/';
// $config['uri_img'] = 'http://images.example.org/%ssrc/';
// Set custom locations for stylesheets and the main script file. This can be used for load balancing
// across multiple servers or hostnames.
// $config['url_stylesheet'] = 'http://static.example.org/style.css'; // main/base stylesheet
// $config['url_javascript'] = 'http://static.example.org/main.js';
// Website favicon.
$config['url_favicon'] = 'static/favicon.ico';
// Try not to build pages when we shouldn't have to.
$config['try_smarter'] = true;
// EXPERIMENTAL: Defer static HTML building to a moment, when a given file is actually accessed.
// Warning: This option won't run out of the box. You need to tell your webserver, that a file
// for serving 403 and 404 pages is /smart_build.php. Also, you need to turn off indexes.
$config['smart_build'] = false;
// Smart build related: when a file doesn't exist, where should we redirect?
$config['page_404'] = '/404.html';
// Smart build related: extra entrypoints.
$config['smart_build_entrypoints'] = array();
/*
* ====================
* Mod settings
* ====================
*/
// Limit how many bans can be removed via the ban list. Set to false (or zero) for no limit.
$config['mod']['unban_limit'] = false;
// Whether or not to lock moderator sessions to IP addresses. This makes cookie theft ineffective.
$config['mod']['lock_ip'] = true;
// The page that is first shown when a moderator logs in. Defaults to the dashboard (?/).
$config['mod']['default'] = '/';
// Mod links (full HTML).
$config['mod']['link_delete'] = '[D]';
$config['mod']['link_ban'] = '[B]';
$config['mod']['link_bandelete'] = '[B&amp;D]';
$config['mod']['link_deletefile'] = '[F]';
$config['mod']['link_spoilerimage'] = '[S]';
$config['mod']['link_spoilerimages'] = '[S+]';
$config['mod']['link_deletebyip'] = '[D+]';
$config['mod']['link_deletebyip_global'] = '[D++]';
$config['mod']['link_sticky'] = '[Sticky]';
$config['mod']['link_desticky'] = '[-Sticky]';
$config['mod']['link_lock'] = '[Lock]';
$config['mod']['link_unlock'] = '[-Lock]';
$config['mod']['link_bumplock'] = '[Sage]';
$config['mod']['link_bumpunlock'] = '[-Sage]';
$config['mod']['link_editpost'] = '[Edit]';
$config['mod']['link_move'] = '[Move]';
$config['mod']['link_cycle'] = '[Cycle]';
$config['mod']['link_uncycle'] = '[-Cycle]';
// Moderator capcodes.
$config['capcode'] = ' <span class="capcode">## %s</span>';
// "## Custom" becomes lightgreen, italic and bold:
//$config['custom_capcode']['Custom'] ='<span class="capcode" style="color:lightgreen;font-style:italic;font-weight:bold"> ## %s</span>';
// "## Mod" makes everything purple, including the name and tripcode:
//$config['custom_capcode']['Mod'] = array(
// '<span class="capcode" style="color:purple"> ## %s</span>',
// 'color:purple', // Change name style; optional
// 'color:purple' // Change tripcode style; optional
//);
// "## Admin" makes everything red and bold, including the name and tripcode:
//$config['custom_capcode']['Admin'] = array(
// '<span class="capcode" style="color:red;font-weight:bold"> ## %s</span>',
// 'color:red;font-weight:bold', // Change name style; optional
// 'color:red;font-weight:bold' // Change tripcode style; optional
//);
// Enable the moving of single replies
$config['move_replies'] = false;
// How often (minimum) to purge the ban list of expired bans (which have been seen). Only works when
// $config['cache'] is enabled and working.
$config['purge_bans'] = 60 * 60 * 12; // 12 hours
// Do DNS lookups on IP addresses to get their hostname for the moderator IP pages (?/IP/x.x.x.x).
$config['mod']['dns_lookup'] = true;
// How many recent posts, per board, to show in ?/IP/x.x.x.x.
$config['mod']['ip_recentposts'] = 5;
// Number of posts to display on the reports page.
$config['mod']['recent_reports'] = 10;
// Number of actions to show per page in the moderation log.
$config['mod']['modlog_page'] = 350;
// Number of bans to show per page in the ban list.
$config['mod']['banlist_page'] = 350;
// Number of news entries to display per page.
$config['mod']['news_page'] = 40;
// Number of results to display per page.
$config['mod']['search_page'] = 200;
// Number of entries to show per page in the moderator noticeboard.
$config['mod']['noticeboard_page'] = 50;
// Number of entries to summarize and display on the dashboard.
$config['mod']['noticeboard_dashboard'] = 5;
// Check public ban message by default.
$config['mod']['check_ban_message'] = false;
// Default public ban message. In public ban messages, %length% is replaced with "for x days" or
// "permanently" (with %LENGTH% being the uppercase equivalent).
$config['mod']['default_ban_message'] = _('USER WAS BANNED FOR THIS POST');
// $config['mod']['default_ban_message'] = 'USER WAS BANNED %LENGTH% FOR THIS POST';
// HTML to append to post bodies for public bans messages (where "%s" is the message).
$config['mod']['ban_message'] = '<span class="public_ban">(%s)</span>';
// When moving a thread to another board and choosing to keep a "shadow thread", an automated post (with
// a capcode) will be made, linking to the new location for the thread. "%s" will be replaced with a
// standard cross-board post citation (>>>/board/xxx)
$config['mod']['shadow_mesage'] = _('Moved to %s.');
// Capcode to use when posting the above message.
$config['mod']['shadow_capcode'] = 'Mod';
// Name to use when posting the above message. If false, $config['anonymous'] will be used.
$config['mod']['shadow_name'] = false;
// PHP time limit for ?/rebuild. A value of 0 should cause PHP to wait indefinitely.
$config['mod']['rebuild_timelimit'] = 0;
// PM snippet (for ?/inbox) length in characters.
$config['mod']['snippet_length'] = 75;
// Edit raw HTML in posts by default.
$config['mod']['raw_html_default'] = false;
// Automatically dismiss all reports regarding a thread when it is locked.
$config['mod']['dismiss_reports_on_lock'] = true;
// Replace ?/config with a simple text editor for editing inc/instance-config.php.
$config['mod']['config_editor_php'] = false;
/*
* ====================
* Mod permissions
* ====================
*/
// Probably best not to change this unless you are smart enough to figure out what you're doing. If you
// decide to change it, remember that it is impossible to redefinite/overwrite groups; you may only add
// new ones.
$config['mod']['groups'] = array(
10 => 'Janitor',
20 => 'Mod',
30 => 'Admin',
// 98 => 'God',
99 => 'Disabled'
);
// If you add stuff to the above, you'll need to call this function immediately after.
define_groups();
// Example: Adding a new permissions group.
// $config['mod']['groups'][0] = 'NearlyPowerless';
// define_groups();
// Capcode permissions.
$config['mod']['capcode'] = array(
// JANITOR => array('Janitor'),
MOD => array('Mod'),
ADMIN => true
);
// Example: Allow mods to post with "## Moderator" as well
// $config['mod']['capcode'][MOD][] = 'Moderator';
// Example: Allow janitors to post with any capcode
// $config['mod']['capcode'][JANITOR] = true;
// Set any of the below to "DISABLED" to make them unavailable for everyone.
// Don't worry about per-board moderators. Let all mods moderate any board.
$config['mod']['skip_per_board'] = false;
/* Post Controls */
// View IP addresses
$config['mod']['show_ip'] = MOD;
// Delete a post
$config['mod']['delete'] = JANITOR;
// Ban a user for a post
$config['mod']['ban'] = MOD;
// Ban and delete (one click; instant)
$config['mod']['bandelete'] = MOD;
// Remove bans
$config['mod']['unban'] = MOD;
// Spoiler image
$config['mod']['spoilerimage'] = JANITOR;
// Delete file (and keep post)
$config['mod']['deletefile'] = JANITOR;
// Delete all posts by IP
$config['mod']['deletebyip'] = MOD;
// Delete all posts by IP across all boards
$config['mod']['deletebyip_global'] = ADMIN;
// Sticky a thread
$config['mod']['sticky'] = MOD;
// Cycle a thread
$config['mod']['cycle'] = MOD;
$config['cycle_limit'] = &$config['reply_limit'];
// Lock a thread
$config['mod']['lock'] = MOD;
// Post in a locked thread
$config['mod']['postinlocked'] = MOD;
// Prevent a thread from being bumped
$config['mod']['bumplock'] = MOD;
// View whether a thread has been bumplocked ("-1" to allow non-mods to see too)
$config['mod']['view_bumplock'] = MOD;
// Edit posts
$config['mod']['editpost'] = ADMIN;
// "Move" a thread to another board (EXPERIMENTAL; has some known bugs)
$config['mod']['move'] = DISABLED;
// Bypass "field_disable_*" (forced anonymity, etc.)
$config['mod']['bypass_field_disable'] = MOD;
// Post bypass unoriginal content check on robot-enabled boards
$config['mod']['postunoriginal'] = ADMIN;
// Bypass flood check
$config['mod']['bypass_filters'] = ADMIN;
$config['mod']['flood'] = &$config['mod']['bypass_filters'];
// Raw HTML posting
$config['mod']['rawhtml'] = ADMIN;
// Clean System
// Post edits remove local clean?
$config['clean']['edits_remove_local'] = true;
// Post edits remove global clean?
$config['clean']['edits_remove_global'] = true;
// Mark post clean for board rule
$config['mod']['clean'] = JANITOR;
// Mark post clean for global rule
$config['mod']['clean_global'] = MOD;
/* Administration */
// View the report queue
$config['mod']['reports'] = JANITOR;
// Dismiss an abuse report
$config['mod']['report_dismiss'] = JANITOR;
// Remove global status from a report
$config['mod']['report_demote'] = JANITOR;
// Elevate a global report to a local report.
$config['mod']['report_promote'] = JANITOR;
// Dismiss all abuse reports by an IP
$config['mod']['report_dismiss_ip'] = JANITOR;
// Dismiss all abuse reports on an individual post or thread
$config['mod']['report_dismiss_content'] = JANITOR;
// View list of bans
$config['mod']['view_banlist'] = MOD;
// View the username of the mod who made a ban
$config['mod']['view_banstaff'] = MOD;
// If the moderator doesn't fit the $config['mod']['view_banstaff'] (previous) permission, show him just
// a "?" instead. Otherwise, it will be "Mod" or "Admin".
$config['mod']['view_banquestionmark'] = false;
// Show expired bans in the ban list (they are kept in cache until the culprit returns)
$config['mod']['view_banexpired'] = true;
// View ban for IP address
$config['mod']['view_ban'] = $config['mod']['view_banlist'];
// View IP address notes
$config['mod']['view_notes'] = JANITOR;
// Create notes
$config['mod']['create_notes'] = $config['mod']['view_notes'];
// Remote notes
$config['mod']['remove_notes'] = ADMIN;
// Create a new board
$config['mod']['newboard'] = ADMIN;
// Manage existing boards (change title, etc)
$config['mod']['manageboards'] = ADMIN;
// Delete a board
$config['mod']['deleteboard'] = ADMIN;
// List/manage users
$config['mod']['manageusers'] = MOD;
// Promote/demote users
$config['mod']['promoteusers'] = ADMIN;
// Edit any users' login information
$config['mod']['editusers'] = ADMIN;
// Change user's own password
$config['mod']['edit_profile'] = JANITOR;
// Delete a user
$config['mod']['deleteusers'] = ADMIN;
// Create a user
$config['mod']['createusers'] = ADMIN;
// View the moderation log
$config['mod']['modlog'] = ADMIN;
// View IP addresses of other mods in ?/log
$config['mod']['show_ip_modlog'] = ADMIN;
// View relevant moderation log entries on IP address pages (ie. ban history, etc.) Warning: Can be
// pretty resource intensive if your mod logs are huge.
$config['mod']['modlog_ip'] = MOD;
// Create a PM (viewing mod usernames)
$config['mod']['create_pm'] = JANITOR;
// Read any PM, sent to or from anybody
$config['mod']['master_pm'] = ADMIN;
// Rebuild everything
$config['mod']['rebuild'] = ADMIN;
// Search through posts, IP address notes and bans
$config['mod']['search'] = JANITOR;
// Allow searching posts (can be used with board configuration file to disallow searching through a
// certain board)
$config['mod']['search_posts'] = JANITOR;
// Read the moderator noticeboard
$config['mod']['noticeboard'] = JANITOR;
// Post to the moderator noticeboard
$config['mod']['noticeboard_post'] = MOD;
// Delete entries from the noticeboard
$config['mod']['noticeboard_delete'] = ADMIN;
// Public ban messages; attached to posts
$config['mod']['public_ban'] = MOD;
// Manage and install themes for homepage
$config['mod']['themes'] = ADMIN;
// Post news entries
$config['mod']['news'] = ADMIN;
// Custom name when posting news
$config['mod']['news_custom'] = ADMIN;
// Delete news entries
$config['mod']['news_delete'] = ADMIN;
// Execute un-filtered SQL queries on the database (?/debug/sql)
$config['mod']['debug_sql'] = DISABLED;
// Look through all cache values for debugging when APC is enabled (?/debug/apc)
$config['mod']['debug_apc'] = ADMIN;
// Edit the current configuration (via web interface)
$config['mod']['edit_config'] = ADMIN;
// View ban appeals
$config['mod']['view_ban_appeals'] = MOD;
// Accept and deny ban appeals
$config['mod']['ban_appeals'] = MOD;
// View the recent posts page
$config['mod']['recent'] = MOD;
// Create pages
$config['mod']['edit_pages'] = MOD;
$config['pages_max'] = 10;
// Config editor permissions
$config['mod']['config'] = array();
// Disable the following configuration variables from being changed via ?/config. The following default
// banned variables are considered somewhat dangerous.
$config['mod']['config'][DISABLED] = array(
'mod>config',
'mod>config_editor_php',
'mod>groups',
'convert_args',
'db>password',
);
$config['mod']['config'][JANITOR] = array(
'!', // Allow editing ONLY the variables listed (in this case, nothing).
);
$config['mod']['config'][MOD] = array(
'!', // Allow editing ONLY the variables listed (plus that in $config['mod']['config'][JANITOR]).
'global_message',
);
// Example: Disallow ADMIN from editing (and viewing) $config['db']['password'].
// $config['mod']['config'][ADMIN] = array(
// 'db>password',
// );
// Example: Allow ADMIN to edit anything other than $config['db']
// (and $config['mod']['config'][DISABLED]).
// $config['mod']['config'][ADMIN] = array(
// 'db',
// );
// Allow OP to remove arbitrary posts in his thread
$config['user_moderation'] = false;
// File board. Like 4chan /f/
$config['file_board'] = false;
// Thread tags. Set to false to disable
// Example: array('A' => 'Chinese cartoons', 'M' => 'Music', 'P' => 'Pornography');
$config['allowed_tags'] = false;
/*
* ====================
* Public post search
* ====================
*/
$config['search'] = array();
// Enable the search form
$config['search']['enable'] = false;
// Maximal number of queries per IP address per minutes
$config['search']['queries_per_minutes'] = Array(15, 2);
// Global maximal number of queries per minutes
$config['search']['queries_per_minutes_all'] = Array(50, 2);
// Limit of search results
$config['search']['search_limit'] = 100;
// Boards for searching
//$config['search']['boards'] = array('a', 'b', 'c', 'd', 'e');
/*
* ====================
* Events (PHP 5.3.0+)
* ====================
*/
// http://tinyboard.org/docs/?p=Events
// event_handler('post', function($post) {
// // do something
// });
// event_handler('post', function($post) {
// // do something else
//
// // return an error (reject post)
// return 'Sorry, you cannot post that!';
// });
/*
* =============
* API settings
* =============
*/
// Whether or not to enable the 4chan-compatible API, disabled by default. See
// https://github.com/4chan/4chan-API for API specification.
$config['api']['enabled'] = true;
// Extra fields in to be shown in the array that are not in the 4chan-API. You can get these by taking a
// look at the schema for posts_ tables. The array should be formatted as $db_column => $translated_name.
// Example: Adding the pre-markup post body to the API as "com_nomarkup".
// $config['api']['extra_fields'] = array('body_nomarkup' => 'com_nomarkup');
/*
* ====================
* Other/uncategorized
* ====================
*/
// Meta keywords. It's probably best to include these in per-board configurations.
// $config['meta_keywords'] = 'chan,anonymous discussion,imageboard,tinyboard';
// Link imageboard to your Google Analytics account to track users and provide traffic insights.
// $config['google_analytics'] = 'UA-xxxxxxx-yy';
// Keep the Google Analytics cookies to one domain -- ga._setDomainName()
// $config['google_analytics_domain'] = 'www.example.org';
// Link imageboard to your Statcounter.com account to track users and provide traffic insights without the Google botnet.
// Extract these values from Statcounter's JS tracking code:
// $config['statcounter_project'] = '1234567';
// $config['statcounter_security'] = 'acbd1234';
// If you use Varnish, Squid, or any similar caching reverse-proxy in front of Tinyboard, you can
// configure Tinyboard to PURGE files when they're written to.
// $config['purge'] = array(
// array('127.0.0.1', 80)
// array('127.0.0.1', 80, 'example.org')
// );
// Connection timeout for $config['purge'], in seconds.
$config['purge_timeout'] = 3;
// Additional mod.php?/ pages. Look in inc/mod/pages.php for help.
// $config['mod']['custom_pages']['/something/(\d+)'] = function($id) {
// global $config;
// if (!hasPermission($config['mod']['something']))
// error($config['error']['noaccess']);
// // ...
// };
// You can also enable themes (like ukko) in mod panel like this:
// require_once("templates/themes/ukko/theme.php");
//
// $config['mod']['custom_pages']['/\*/'] = function() {
// global $mod;
//
// $ukko = new ukko();
// $ukko->settings = array();
// $ukko->settings['uri'] = '*';
// $ukko->settings['title'] = 'derp';
// $ukko->settings['subtitle'] = 'derpity';
// $ukko->settings['thread_limit'] = 15;
// $ukko->settings['exclude'] = '';
//
// echo $ukko->build($mod);
// };
// Example: Add links to dashboard (will all be in a new "Other" category).
// $config['mod']['dashboard_links']['Something'] = '?/something';
// Remote servers. I'm not even sure if this code works anymore. It might. Haven't tried it in a while.
// $config['remote']['static'] = array(
// 'host' => 'static.example.org',
// 'auth' => array(
// 'method' => 'plain',
// 'username' => 'username',
// 'password' => 'password!123'
// ),
// 'type' => 'scp'
// );
// Create gzipped static files along with ungzipped.
// This is useful with nginx with gzip_static on.
$config['gzip_static'] = false;
// Regex for board URIs. Don't add "`" character or any Unicode that MySQL can't handle. 58 characters
// is the absolute maximum, because MySQL cannot handle table names greater than 64 characters.
$config['board_regex'] = '[0-9a-zA-Z\+$_\x{0080}-\x{FFFF}]{1,58}';
// Regex for matching links.
$config['link_regex'] = '((?:(?:https?:)?\/\/|ftp:\/\/|irc:\/\/)[^\s<>()"]+?(?:\([^\s<>()"]*?\)[^\s<>()"]*?)*)((?:\s|<|>|"|\.|\]|!|\?|,|&\#44;|&quot;)*(?:[\s<>()"]|$))';
// Allowed URLs in ?/settings
$config['allowed_offsite_urls'] = array('https://i.imgur.com/', 'https://media.8ch.net/', 'https://media.8chan.co/', 'https://a.pomf.se/', 'https://fonts.googleapis.com/', 'https://fonts.gstatic.com/');
// Use read.php?
// read.php is a file that dynamically displays pages to users instead of the build on demand system in use in Tinyboard since 2010.
//
// read.php is basically a watered down mod.php -- if coupled with caching, it improves performance and allows for easier replication
// across machines.
$config['use_read_php'] = false;
// Use oekaki?
$config['oekaki'] = false;
// Twig cache?
$config['twig_cache'] = false;
// Use CAPTCHA for reports?
$config['report_captcha'] = false;
// Allowed HTML tags in ?/edit_pages.
$config['allowed_html'] = 'a[href|title],p,br,li,ol,ul,strong,em,u,h2,b,i,tt,div,img[src|alt|title],hr,h1,h2,h3,h4,h5';
// Use custom assets? (spoiler file, etc; this is used by ?/settings and ?/assets)
$config['custom_assets'] = false;
// If you use CloudFlare set these for some features to work correctly.
$config['cloudflare'] = array();
$config['cloudflare']['enabled'] = false;
$config['cloudflare']['token'] = 'token';
$config['cloudflare']['email'] = 'email';
$config['cloudflare']['domain'] = 'example.com';