early-access version 3380

README.md

@@ -1,7 +1,7 @@
 yuzu emulator early access
 =============
 
-This is the source code for early-access 3378.
+This is the source code for early-access 3380.
 
 ## Legal Notice
 

src/audio_core/sink/cubeb_sink.cpp

@@ -302,11 +302,21 @@ std::vector<std::string> ListCubebSinkDevices(bool capture) {
     std::vector<std::string> device_list;
     cubeb* ctx;
 
+#ifdef _WIN32
+    auto com_init_result = CoInitializeEx(nullptr, COINIT_MULTITHREADED);
+#endif
+
     if (cubeb_init(&ctx, "yuzu Device Enumerator", nullptr) != CUBEB_OK) {
         LOG_CRITICAL(Audio_Sink, "cubeb_init failed");
         return {};
     }
 
+#ifdef _WIN32
+    if (SUCCEEDED(com_init_result)) {
+        CoUninitialize();
+    }
+#endif
+
     auto type{capture ? CUBEB_DEVICE_TYPE_INPUT : CUBEB_DEVICE_TYPE_OUTPUT};
     cubeb_device_collection collection;
     if (cubeb_enumerate_devices(ctx, type, &collection) != CUBEB_OK) {
@@ -329,12 +339,22 @@ std::vector<std::string> ListCubebSinkDevices(bool capture) {
 u32 GetCubebLatency() {
     cubeb* ctx;
 
+#ifdef _WIN32
+    auto com_init_result = CoInitializeEx(nullptr, COINIT_MULTITHREADED);
+#endif
+
     if (cubeb_init(&ctx, "yuzu Latency Getter", nullptr) != CUBEB_OK) {
         LOG_CRITICAL(Audio_Sink, "cubeb_init failed");
         // Return a large latency so we choose SDL instead.
         return 10000u;
     }
 
+#ifdef _WIN32
+    if (SUCCEEDED(com_init_result)) {
+        CoUninitialize();
+    }
+#endif
+
     cubeb_stream_params params{};
     params.rate = TargetSampleRate;
     params.channels = 2;

src/common/settings.h

@@ -488,6 +488,7 @@ struct Values {
     Setting<bool> enable_raw_input{false, "enable_raw_input"};
     Setting<bool> controller_navigation{true, "controller_navigation"};
     Setting<bool> enable_joycon_driver{true, "enable_joycon_driver"};
+    Setting<bool> enable_procon_driver{false, "enable_procon_driver"};
 
     SwitchableSetting<bool> vibration_enabled{true, "vibration_enabled"};
     SwitchableSetting<bool> enable_accurate_vibrations{false, "enable_accurate_vibrations"};

src/core/hid/emulated_controller.cpp

@@ -957,7 +957,7 @@ void EmulatedController::SetMotion(const Common::Input::CallbackStatus& callback
         raw_status.gyro.y.value,
         raw_status.gyro.z.value,
     });
-    emulated.SetGyroThreshold(raw_status.gyro.x.properties.threshold);
+    emulated.SetUserGyroThreshold(raw_status.gyro.x.properties.threshold);
     emulated.UpdateRotation(raw_status.delta_timestamp);
     emulated.UpdateOrientation(raw_status.delta_timestamp);
     force_update_motion = raw_status.force_update;
@@ -1284,6 +1284,26 @@ void EmulatedController::SetLedPattern() {
     }
 }
 
+void EmulatedController::SetGyroscopeZeroDriftMode(GyroscopeZeroDriftMode mode) {
+    for (auto& motion : controller.motion_values) {
+        switch (mode) {
+        case GyroscopeZeroDriftMode::Loose:
+            motion_sensitivity = motion.emulated.IsAtRestLoose;
+            motion.emulated.SetGyroThreshold(motion.emulated.ThresholdLoose);
+            break;
+        case GyroscopeZeroDriftMode::Tight:
+            motion_sensitivity = motion.emulated.IsAtRestThight;
+            motion.emulated.SetGyroThreshold(motion.emulated.ThresholdThight);
+            break;
+        case GyroscopeZeroDriftMode::Standard:
+        default:
+            motion_sensitivity = motion.emulated.IsAtRestStandard;
+            motion.emulated.SetGyroThreshold(motion.emulated.ThresholdStandard);
+            break;
+        }
+    }
+}
+
 void EmulatedController::SetSupportedNpadStyleTag(NpadStyleTag supported_styles) {
     supported_style_tag = supported_styles;
     if (!is_connected) {

src/core/hid/emulated_controller.h

@@ -398,6 +398,9 @@ public:
     /// Asks the output device to change the player led pattern
     void SetLedPattern();
 
+    /// Changes sensitivity of the motion sensor
+    void SetGyroscopeZeroDriftMode(GyroscopeZeroDriftMode mode);
+
     /**
      * Adds a callback to the list of events
      * @param update_callback A ConsoleUpdateCallback that will be triggered
@@ -523,7 +526,7 @@ private:
     bool is_connected{false};
     bool is_configuring{false};
     bool system_buttons_enabled{true};
-    f32 motion_sensitivity{0.01f};
+    f32 motion_sensitivity{Core::HID::MotionInput::IsAtRestStandard};
     bool force_update_motion{false};
     u32 turbo_button_state{0};
 

src/core/hid/hid_types.h

@@ -282,6 +282,13 @@ enum class VibrationGcErmCommand : u64 {
     StopHard = 2,
 };
 
+// This is nn::hid::GyroscopeZeroDriftMode
+enum class GyroscopeZeroDriftMode : u32 {
+    Loose = 0,
+    Standard = 1,
+    Tight = 2,
+};
+
 // This is nn::hid::NpadStyleTag
 struct NpadStyleTag {
     union {

src/core/hid/motion_input.cpp

@@ -9,7 +9,7 @@ namespace Core::HID {
 MotionInput::MotionInput() {
     // Initialize PID constants with default values
     SetPID(0.3f, 0.005f, 0.0f);
-    SetGyroThreshold(0.007f);
+    SetGyroThreshold(ThresholdStandard);
 }
 
 void MotionInput::SetPID(f32 new_kp, f32 new_ki, f32 new_kd) {
@@ -26,11 +26,11 @@ void MotionInput::SetGyroscope(const Common::Vec3f& gyroscope) {
     gyro = gyroscope - gyro_bias;
 
     // Auto adjust drift to minimize drift
-    if (!IsMoving(0.1f)) {
+    if (!IsMoving(IsAtRestRelaxed)) {
         gyro_bias = (gyro_bias * 0.9999f) + (gyroscope * 0.0001f);
     }
 
-    if (gyro.Length() < gyro_threshold) {
+    if (gyro.Length() < gyro_threshold * user_gyro_threshold) {
         gyro = {};
     } else {
         only_accelerometer = false;
@@ -49,6 +49,10 @@ void MotionInput::SetGyroThreshold(f32 threshold) {
     gyro_threshold = threshold;
 }
 
+void MotionInput::SetUserGyroThreshold(f32 threshold) {
+    user_gyro_threshold = threshold / ThresholdStandard;
+}
+
 void MotionInput::EnableReset(bool reset) {
     reset_enabled = reset;
 }
@@ -208,7 +212,7 @@ void MotionInput::ResetOrientation() {
     if (!reset_enabled || only_accelerometer) {
         return;
     }
-    if (!IsMoving(0.5f) && accel.z <= -0.9f) {
+    if (!IsMoving(IsAtRestRelaxed) && accel.z <= -0.9f) {
         ++reset_counter;
         if (reset_counter > 900) {
             quat.w = 0;

src/core/hid/motion_input.h

@@ -11,6 +11,15 @@ namespace Core::HID {
 
 class MotionInput {
 public:
+    static constexpr float ThresholdLoose = 0.01f;
+    static constexpr float ThresholdStandard = 0.007f;
+    static constexpr float ThresholdThight = 0.002f;
+
+    static constexpr float IsAtRestRelaxed = 0.05f;
+    static constexpr float IsAtRestLoose = 0.02f;
+    static constexpr float IsAtRestStandard = 0.01f;
+    static constexpr float IsAtRestThight = 0.005f;
+
     explicit MotionInput();
 
     MotionInput(const MotionInput&) = default;
@@ -26,6 +35,9 @@ public:
     void SetGyroBias(const Common::Vec3f& bias);
     void SetGyroThreshold(f32 threshold);
 
+    /// Applies a modifier on top of the normal gyro threshold
+    void SetUserGyroThreshold(f32 threshold);
+
     void EnableReset(bool reset);
     void ResetRotations();
 
@@ -74,6 +86,9 @@ private:
     // Minimum gyro amplitude to detect if the device is moving
     f32 gyro_threshold = 0.0f;
 
+    // Multiplies gyro_threshold by this value
+    f32 user_gyro_threshold = 0.0f;
+
     // Number of invalid sequential data
     u32 reset_counter = 0;
 

src/core/hle/kernel/svc_version.h

@@ -35,11 +35,11 @@ constexpr inline u32 EncodeKernelVersion(u32 major, u32 minor) {
 }
 
 constexpr inline u32 GetKernelMajorVersion(u32 encoded) {
-    return std::bit_cast<decltype(KernelVersion::major_version)>(encoded).Value();
+    return decltype(KernelVersion::major_version)::ExtractValue(encoded);
 }
 
 constexpr inline u32 GetKernelMinorVersion(u32 encoded) {
-    return std::bit_cast<decltype(KernelVersion::minor_version)>(encoded).Value();
+    return decltype(KernelVersion::minor_version)::ExtractValue(encoded);
 }
 
 // Nintendo doesn't support programs targeting SVC versions < 3.0.

src/core/hle/service/hid/controllers/npad.cpp

@@ -1132,7 +1132,8 @@ Result Controller_NPad::DisconnectNpad(Core::HID::NpadIdType npad_id) {
     return ResultSuccess;
 }
 Result Controller_NPad::SetGyroscopeZeroDriftMode(
-    const Core::HID::SixAxisSensorHandle& sixaxis_handle, GyroscopeZeroDriftMode drift_mode) {
+    const Core::HID::SixAxisSensorHandle& sixaxis_handle,
+    Core::HID::GyroscopeZeroDriftMode drift_mode) {
     const auto is_valid = VerifyValidSixAxisSensorHandle(sixaxis_handle);
     if (is_valid.IsError()) {
         LOG_ERROR(Service_HID, "Invalid handle, error_code={}", is_valid.raw);
@@ -1140,14 +1141,16 @@ Result Controller_NPad::SetGyroscopeZeroDriftMode(
     }
 
     auto& sixaxis = GetSixaxisState(sixaxis_handle);
+    auto& controller = GetControllerFromHandle(sixaxis_handle);
     sixaxis.gyroscope_zero_drift_mode = drift_mode;
+    controller.device->SetGyroscopeZeroDriftMode(drift_mode);
 
     return ResultSuccess;
 }
 
 Result Controller_NPad::GetGyroscopeZeroDriftMode(
     const Core::HID::SixAxisSensorHandle& sixaxis_handle,
-    GyroscopeZeroDriftMode& drift_mode) const {
+    Core::HID::GyroscopeZeroDriftMode& drift_mode) const {
     const auto is_valid = VerifyValidSixAxisSensorHandle(sixaxis_handle);
     if (is_valid.IsError()) {
         LOG_ERROR(Service_HID, "Invalid handle, error_code={}", is_valid.raw);

src/core/hle/service/hid/controllers/npad.h

@@ -52,13 +52,6 @@ public:
     // When the controller is requesting a motion update for the shared memory
     void OnMotionUpdate(const Core::Timing::CoreTiming& core_timing) override;
 
-    // This is nn::hid::GyroscopeZeroDriftMode
-    enum class GyroscopeZeroDriftMode : u32 {
-        Loose = 0,
-        Standard = 1,
-        Tight = 2,
-    };
-
     // This is nn::hid::NpadJoyHoldType
     enum class NpadJoyHoldType : u64 {
         Vertical = 0,
@@ -146,9 +139,9 @@ public:
     Result DisconnectNpad(Core::HID::NpadIdType npad_id);
 
     Result SetGyroscopeZeroDriftMode(const Core::HID::SixAxisSensorHandle& sixaxis_handle,
-                                     GyroscopeZeroDriftMode drift_mode);
+                                     Core::HID::GyroscopeZeroDriftMode drift_mode);
     Result GetGyroscopeZeroDriftMode(const Core::HID::SixAxisSensorHandle& sixaxis_handle,
-                                     GyroscopeZeroDriftMode& drift_mode) const;
+                                     Core::HID::GyroscopeZeroDriftMode& drift_mode) const;
     Result IsSixAxisSensorAtRest(const Core::HID::SixAxisSensorHandle& sixaxis_handle,
                                  bool& is_at_rest) const;
     Result IsFirmwareUpdateAvailableForSixAxisSensor(
@@ -489,7 +482,8 @@ private:
         Core::HID::SixAxisSensorFusionParameters fusion{};
         Core::HID::SixAxisSensorCalibrationParameter calibration{};
         Core::HID::SixAxisSensorIcInformation ic_information{};
-        GyroscopeZeroDriftMode gyroscope_zero_drift_mode{GyroscopeZeroDriftMode::Standard};
+        Core::HID::GyroscopeZeroDriftMode gyroscope_zero_drift_mode{
+            Core::HID::GyroscopeZeroDriftMode::Standard};
     };
 
     struct NpadControllerData {

src/core/hle/service/hid/hid.cpp

@@ -712,7 +712,7 @@ void Hid::ResetSixAxisSensorFusionParameters(Kernel::HLERequestContext& ctx) {
 void Hid::SetGyroscopeZeroDriftMode(Kernel::HLERequestContext& ctx) {
     IPC::RequestParser rp{ctx};
     const auto sixaxis_handle{rp.PopRaw<Core::HID::SixAxisSensorHandle>()};
-    const auto drift_mode{rp.PopEnum<Controller_NPad::GyroscopeZeroDriftMode>()};
+    const auto drift_mode{rp.PopEnum<Core::HID::GyroscopeZeroDriftMode>()};
     const auto applet_resource_user_id{rp.Pop<u64>()};
 
     auto& controller = GetAppletResource()->GetController<Controller_NPad>(HidController::NPad);
@@ -739,7 +739,7 @@ void Hid::GetGyroscopeZeroDriftMode(Kernel::HLERequestContext& ctx) {
 
     const auto parameters{rp.PopRaw<Parameters>()};
 
-    auto drift_mode{Controller_NPad::GyroscopeZeroDriftMode::Standard};
+    auto drift_mode{Core::HID::GyroscopeZeroDriftMode::Standard};
     auto& controller = GetAppletResource()->GetController<Controller_NPad>(HidController::NPad);
     const auto result = controller.GetGyroscopeZeroDriftMode(parameters.sixaxis_handle, drift_mode);
 
@@ -764,7 +764,7 @@ void Hid::ResetGyroscopeZeroDriftMode(Kernel::HLERequestContext& ctx) {
 
     const auto parameters{rp.PopRaw<Parameters>()};
 
-    const auto drift_mode{Controller_NPad::GyroscopeZeroDriftMode::Standard};
+    const auto drift_mode{Core::HID::GyroscopeZeroDriftMode::Standard};
     auto& controller = GetAppletResource()->GetController<Controller_NPad>(HidController::NPad);
     const auto result = controller.SetGyroscopeZeroDriftMode(parameters.sixaxis_handle, drift_mode);
 

src/input_common/drivers/joycon.cpp

@@ -16,7 +16,7 @@ namespace InputCommon {
 
 Joycons::Joycons(const std::string& input_engine_) : InputEngine(input_engine_) {
     // Avoid conflicting with SDL driver
-    if (!Settings::values.enable_joycon_driver) {
+    if (!Settings::values.enable_joycon_driver && !Settings::values.enable_procon_driver) {
         return;
     }
     LOG_INFO(Input, "Joycon driver Initialization started");
@@ -46,6 +46,12 @@ void Joycons::Reset() {
         }
         device->Stop();
     }
+    for (const auto& device : pro_controller) {
+        if (!device) {
+            continue;
+        }
+        device->Stop();
+    }
     SDL_hid_exit();
 }
 
@@ -61,6 +67,11 @@ void Joycons::Setup() {
         PreSetController(GetIdentifier(port, Joycon::ControllerType::Right));
         device = std::make_shared<Joycon::JoyconDriver>(port++);
     }
+    port = 0;
+    for (auto& device : pro_controller) {
+        PreSetController(GetIdentifier(port, Joycon::ControllerType::Pro));
+        device = std::make_shared<Joycon::JoyconDriver>(port++);
+    }
 
     scan_thread = std::jthread([this](std::stop_token stop_token) { ScanThread(stop_token); });
 }
@@ -116,6 +127,9 @@ bool Joycons::IsDeviceNew(SDL_hid_device_info* device_info) const {
     // Check if device already exist
     switch (type) {
     case Joycon::ControllerType::Left:
+        if (!Settings::values.enable_joycon_driver) {
+            return false;
+        }
         for (const auto& device : left_joycons) {
             if (is_handle_identical(device)) {
                 return false;
@@ -123,12 +137,25 @@ bool Joycons::IsDeviceNew(SDL_hid_device_info* device_info) const {
         }
         break;
     case Joycon::ControllerType::Right:
+        if (!Settings::values.enable_joycon_driver) {
+            return false;
+        }
         for (const auto& device : right_joycons) {
             if (is_handle_identical(device)) {
                 return false;
             }
         }
         break;
+    case Joycon::ControllerType::Pro:
+        if (!Settings::values.enable_procon_driver) {
+            return false;
+        }
+        for (const auto& device : pro_controller) {
+            if (is_handle_identical(device)) {
+                return false;
+            }
+        }
+        break;
     default:
         return false;
     }
@@ -199,6 +226,14 @@ std::shared_ptr<Joycon::JoyconDriver> Joycons::GetNextFreeHandle(
             return *unconnected_device;
         }
     }
+    if (type == Joycon::ControllerType::Pro) {
+        const auto unconnected_device = std::ranges::find_if(
+            pro_controller, [](auto& device) { return !device->IsConnected(); });
+
+        if (unconnected_device != pro_controller.end()) {
+            return *unconnected_device;
+        }
+    }
     return nullptr;
 }
 
@@ -409,6 +444,15 @@ std::shared_ptr<Joycon::JoyconDriver> Joycons::GetHandle(PadIdentifier identifie
         }
     }
 
+    if (type == Joycon::ControllerType::Pro) {
+        const auto matching_device = std::ranges::find_if(
+            pro_controller, [is_handle_active](auto& device) { return is_handle_active(device); });
+
+        if (matching_device != pro_controller.end()) {
+            return *matching_device;
+        }
+    }
+
     return nullptr;
 }
 
@@ -455,6 +499,9 @@ std::vector<Common::ParamPackage> Joycons::GetInputDevices() const {
     for (const auto& controller : right_joycons) {
         add_entry(controller);
     }
+    for (const auto& controller : pro_controller) {
+        add_entry(controller);
+    }
 
     // List dual joycon pairs
     for (std::size_t i = 0; i < MaxSupportedControllers; i++) {

src/input_common/drivers/joycon.h

@@ -106,6 +106,7 @@ private:
     // Joycon types are split by type to ease supporting dualjoycon configurations
     std::array<std::shared_ptr<Joycon::JoyconDriver>, MaxSupportedControllers> left_joycons{};
     std::array<std::shared_ptr<Joycon::JoyconDriver>, MaxSupportedControllers> right_joycons{};
+    std::array<std::shared_ptr<Joycon::JoyconDriver>, MaxSupportedControllers> pro_controller{};
 };
 
 } // namespace InputCommon

src/input_common/drivers/sdl_driver.cpp

@@ -343,6 +343,14 @@ void SDLDriver::InitJoystick(int joystick_index) {
         }
     }
 
+    if (Settings::values.enable_procon_driver) {
+        if (guid.uuid[5] == 0x05 && guid.uuid[4] == 0x7e && guid.uuid[8] == 0x09) {
+            LOG_WARNING(Input, "Preferring joycon driver for device index {}", joystick_index);
+            SDL_JoystickClose(sdl_joystick);
+            return;
+        }
+    }
+
     std::scoped_lock lock{joystick_map_mutex};
     if (joystick_map.find(guid) == joystick_map.end()) {
         auto joystick = std::make_shared<SDLJoystick>(guid, 0, sdl_joystick, sdl_gamecontroller);
@@ -465,13 +473,19 @@ SDLDriver::SDLDriver(std::string input_engine_) : InputEngine(std::move(input_en
     SDL_SetHint(SDL_HINT_JOYSTICK_HIDAPI_PS5_RUMBLE, "1");
     SDL_SetHint(SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS, "1");
 
-    // Disable hidapi drivers for switch controllers when the custom joycon driver is enabled
+    // Disable hidapi drivers for joycon controllers when the custom joycon driver is enabled
     if (Settings::values.enable_joycon_driver) {
         SDL_SetHint(SDL_HINT_JOYSTICK_HIDAPI_JOY_CONS, "0");
     } else {
         SDL_SetHint(SDL_HINT_JOYSTICK_HIDAPI_JOY_CONS, "1");
     }
+
+    // Disable hidapi drivers for pro controllers when the custom joycon driver is enabled
+    if (Settings::values.enable_procon_driver) {
+        SDL_SetHint(SDL_HINT_JOYSTICK_HIDAPI_SWITCH, "0");
+    } else {
         SDL_SetHint(SDL_HINT_JOYSTICK_HIDAPI_SWITCH, "1");
+    }
 
     // Disable hidapi driver for xbox. Already default on Windows, this causes conflict with native
     // driver on Linux.

src/input_common/helpers/joycon_driver.cpp

@@ -543,9 +543,10 @@ void JoyconDriver::SetCallbacks(const JoyconCallbacks& callbacks) {
 
 DriverResult JoyconDriver::GetDeviceType(SDL_hid_device_info* device_info,
                                          ControllerType& controller_type) {
-    static constexpr std::array<std::pair<u32, ControllerType>, 2> supported_devices{
+    static constexpr std::array<std::pair<u32, ControllerType>, 6> supported_devices{
         std::pair<u32, ControllerType>{0x2006, ControllerType::Left},
         {0x2007, ControllerType::Right},
+        {0x2009, ControllerType::Pro},
     };
     constexpr u16 nintendo_vendor_id = 0x057e;
 

src/yuzu/configuration/config.cpp

@@ -441,6 +441,7 @@ void Config::ReadControlValues() {
     Settings::values.mouse_panning = false;
     ReadBasicSetting(Settings::values.mouse_panning_sensitivity);
     ReadBasicSetting(Settings::values.enable_joycon_driver);
+    ReadBasicSetting(Settings::values.enable_procon_driver);
 
     ReadBasicSetting(Settings::values.tas_enable);
     ReadBasicSetting(Settings::values.tas_loop);
@@ -1141,6 +1142,7 @@ void Config::SaveControlValues() {
     WriteGlobalSetting(Settings::values.motion_enabled);
     WriteBasicSetting(Settings::values.enable_raw_input);
     WriteBasicSetting(Settings::values.enable_joycon_driver);
+    WriteBasicSetting(Settings::values.enable_procon_driver);
     WriteBasicSetting(Settings::values.keyboard_enabled);
     WriteBasicSetting(Settings::values.emulate_analog_keyboard);
     WriteBasicSetting(Settings::values.mouse_panning_sensitivity);

src/yuzu/configuration/configure_input_advanced.cpp

@@ -139,6 +139,7 @@ void ConfigureInputAdvanced::ApplyConfiguration() {
     Settings::values.enable_ring_controller = ui->enable_ring_controller->isChecked();
     Settings::values.enable_ir_sensor = ui->enable_ir_sensor->isChecked();
     Settings::values.enable_joycon_driver = ui->enable_joycon_driver->isChecked();
+    Settings::values.enable_procon_driver = ui->enable_procon_driver->isChecked();
 }
 
 void ConfigureInputAdvanced::LoadConfiguration() {
@@ -174,6 +175,7 @@ void ConfigureInputAdvanced::LoadConfiguration() {
     ui->enable_ring_controller->setChecked(Settings::values.enable_ring_controller.GetValue());
     ui->enable_ir_sensor->setChecked(Settings::values.enable_ir_sensor.GetValue());
     ui->enable_joycon_driver->setChecked(Settings::values.enable_joycon_driver.GetValue());
+    ui->enable_procon_driver->setChecked(Settings::values.enable_procon_driver.GetValue());
 
     UpdateUIEnabled();
 }

src/yuzu/configuration/configure_input_advanced.ui

@@ -2712,6 +2712,22 @@
                      </widget>
                    </item>
                    <item row="6" column="0">
+                      <widget class="QCheckBox" name="enable_procon_driver">
+                       <property name="toolTip">
+                         <string>Requires restarting yuzu</string>
+                       </property>
+                       <property name="minimumSize">
+                         <size>
+                           <width>0</width>
+                           <height>23</height>
+                         </size>
+                       </property>
+                       <property name="text">
+                         <string>Enable direct Pro Controller driver [EXPERIMENTAL]</string>
+                       </property>
+                     </widget>
+                   </item>
+                   <item row="7" column="0">
                      <widget class="QCheckBox" name="mouse_panning">
                        <property name="minimumSize">
                          <size>
@@ -2724,7 +2740,7 @@
                        </property>
                      </widget>
                    </item>
-                   <item row="6" column="2">
+                   <item row="7" column="2">
                      <widget class="QSpinBox" name="mouse_panning_sensitivity">
                        <property name="toolTip">
                          <string>Mouse sensitivity</string>
@@ -2746,14 +2762,14 @@
                        </property>
                      </widget>
                    </item>
-                   <item row="7" column="0">
+                   <item row="8" column="0">
                      <widget class="QLabel" name="motion_touch">
                        <property name="text">
                          <string>Motion / Touch</string>
                        </property>
                      </widget>
                    </item>
-                   <item row="7" column="2">
+                   <item row="8" column="2">
                      <widget class="QPushButton" name="buttonMotionTouch">
                        <property name="text">
                          <string>Configure</string>

src/yuzu/main.cpp

@@ -805,6 +805,8 @@ void GMainWindow::WebBrowserOpenWebPage(const std::string& main_url,
                                 layout.screen.GetHeight() / scale_ratio);
         web_browser_view.move(layout.screen.left / scale_ratio,
                               (layout.screen.top / scale_ratio) + menuBar()->height());
+        web_browser_view.setZoomFactor(static_cast<qreal>(layout.screen.GetWidth() / scale_ratio) /
+                                       static_cast<qreal>(Layout::ScreenUndocked::Width));
 
         web_browser_view.setFocus();
         web_browser_view.show();

src/yuzu_cmd/config.cpp

@@ -178,6 +178,7 @@ void Config::ReadValues() {
 
     ReadSetting("ControlsGeneral", Settings::values.enable_raw_input);
     ReadSetting("ControlsGeneral", Settings::values.enable_joycon_driver);
+    ReadSetting("ControlsGeneral", Settings::values.enable_procon_driver);
     ReadSetting("ControlsGeneral", Settings::values.emulate_analog_keyboard);
     ReadSetting("ControlsGeneral", Settings::values.vibration_enabled);
     ReadSetting("ControlsGeneral", Settings::values.enable_accurate_vibrations);