#include "FastLED.h" #define NUM_LEDS 6 CRGB leds[NUM_LEDS]; #if defined(__AVR_ATmega32U4__) || defined(ARDUINO_SAMD_ZERO) #pragma message "当前的开发板是 ATmega32U4 或 SAMD_ZERO" #define SerialDevice SerialUSB #define LED_PIN A3 #define PN532_SPI_SS 10 //32U4 不使用 SPI 时,执行 ReadWithoutEncryption 会失败 #elif defined(ARDUINO_ESP8266_NODEMCU_ESP12E) #pragma message "当前的开发板是 NODEMCU_ESP12E" #define SerialDevice Serial #define LED_PIN D5 #elif defined(ARDUINO_NodeMCU_32S) #pragma message "当前的开发板是 NodeMCU_32S" #define SerialDevice Serial #define LED_PIN 13 #define PN532_SPI_SS 5 #else #error "未经测试的开发板,请检查串口和阵脚定义" #endif #if defined(PN532_SPI_SS) #pragma message "使用 SPI 连接 PN532" #include #include PN532_SPI pn532(SPI, PN532_SPI_SS); #else #include #include PN532_I2C pn532(Wire); #endif #include "PN532.h" PN532 nfc(pn532); uint8_t AimeKey[6], BanaKey[6]; enum { SG_NFC_CMD_GET_FW_VERSION = 0x30, SG_NFC_CMD_GET_HW_VERSION = 0x32, SG_NFC_CMD_RADIO_ON = 0x40, SG_NFC_CMD_RADIO_OFF = 0x41, SG_NFC_CMD_POLL = 0x42, SG_NFC_CMD_MIFARE_SELECT_TAG = 0x43, SG_NFC_CMD_MIFARE_SET_KEY_BANA = 0x50, SG_NFC_CMD_BANA_AUTHENTICATE = 0x51, SG_NFC_CMD_MIFARE_READ_BLOCK = 0x52, SG_NFC_CMD_MIFARE_SET_KEY_AIME = 0x54, SG_NFC_CMD_AIME_AUTHENTICATE = 0x55, SG_NFC_CMD_TO_UPDATER_MODE = 0x60, SG_NFC_CMD_SEND_HEX_DATA = 0x61, SG_NFC_CMD_RESET = 0x62, SG_NFC_CMD_FELICA_ENCAP = 0x71, SG_RGB_CMD_SET_COLOR = 0x81, SG_RGB_CMD_GET_INFO = 0xF0, SG_RGB_CMD_RESET = 0xF5, //FELICA_ENCAP FELICA_CMD_POLL = 0x00, FELICA_CMD_NDA_06 = 0x06, FELICA_CMD_NDA_08 = 0x08, FELICA_CMD_GET_SYSTEM_CODE = 0x0C, FELICA_CMD_NDA_A4 = 0xA4, }; typedef union packet_req { uint8_t bytes[128]; struct { uint8_t frame_len; uint8_t addr; uint8_t seq_no; uint8_t cmd; uint8_t payload_len; union { uint8_t key[6]; //sg_nfc_req_mifare_set_key(bana or aime) uint8_t color_payload[3];//sg_led_req_set_color struct { //sg_nfc_cmd_mifare_select_tag,sg_nfc_cmd_mifare_authenticate,sg_nfc_cmd_mifare_read_block uint8_t uid[4]; uint8_t block_no; }; struct { //sg_nfc_req_felica_encap uint8_t encap_IDm[8]; uint8_t encap_len; uint8_t encap_code; union { struct { //FELICA_CMD_POLL,猜测 uint8_t poll_systemCode[2]; uint8_t poll_requestCode; uint8_t poll_timeout; }; struct { //NDA_06,NDA_08,NDA_A4 uint8_t RW_IDm[8]; uint8_t numService;//and NDA_A4 unknown byte uint8_t serviceCodeList[2]; uint8_t numBlock; uint8_t blockList[1][2];//长度可变 uint8_t blockData[16];//WriteWithoutEncryption,ignore }; uint8_t felica_payload[1]; }; }; }; }; } packet_req_t; typedef union packet_res { uint8_t bytes[128]; struct { uint8_t frame_len; uint8_t addr; uint8_t seq_no; uint8_t cmd; uint8_t status; uint8_t payload_len; union { char version[23]; //sg_nfc_res_get_fw_version,sg_nfc_res_get_hw_version uint8_t info_payload[9]; //sg_led_res_get_info uint8_t block[16]; //sg_nfc_res_mifare_read_block struct { //sg_nfc_res_poll uint8_t count; uint8_t type; uint8_t id_len; union { uint8_t mifare_uid[4]; struct { uint8_t IDm[8]; uint8_t PMm[8]; }; }; }; struct { //sg_nfc_res_felica_encap uint8_t encap_len; uint8_t encap_code; uint8_t encap_IDm[8]; union { struct {//FELICA_CMD_POLL uint8_t poll_PMm[8]; uint8_t poll_systemCode[2]; }; struct { uint8_t RW_status[2];//猜测,NDA_06,NDA_08 uint8_t numBlock;//NDA_06 uint8_t blockData[1][1][16];//NDA_06 }; uint8_t felica_payload[1]; }; }; }; }; } packet_res_t; static packet_req_t req; static packet_res_t res; static void sg_res_init(uint8_t payload_len = 0) { //初始化模板 res.frame_len = 6 + payload_len; res.addr = req.addr; res.seq_no = req.seq_no; res.cmd = req.cmd; res.status = 0; res.payload_len = payload_len; } static void sg_nfc_cmd_reset() { //重置读卡器 nfc.begin(); nfc.setPassiveActivationRetries(0x01); //设定等待次数,0xFF永远等待 nfc.SAMConfig(); if (nfc.getFirmwareVersion()) { nfc.SAMConfig(); sg_res_init(); res.status = 3; return; } FastLED.showColor(0xFF0000); } static void sg_nfc_cmd_get_fw_version() { sg_res_init(23); memcpy(res.version, "TN32MSEC003S F/W Ver1.2", 23); } static void sg_nfc_cmd_get_hw_version() { sg_res_init(23); memcpy(res.version, "TN32MSEC003S H/W Ver3.0", 23); } static void sg_nfc_cmd_mifare_set_key_aime() { sg_res_init(); memcpy(AimeKey, req.key, 6); } static void sg_nfc_cmd_mifare_set_key_bana() { sg_res_init(); memcpy(BanaKey, req.key, 6); } static void sg_led_cmd_reset() { sg_res_init(); } static void sg_led_cmd_get_info() { sg_res_init(9); static uint8_t info[9] = {'1', '5', '0', '8', '4', 0xFF, 0x10, 0x00, 0x12}; memcpy(res.info_payload, info, 9); } static void sg_led_cmd_set_color() { FastLED.showColor(CRGB(req.color_payload[0], req.color_payload[1], req.color_payload[2])); } static void sg_nfc_cmd_radio_on() { sg_res_init(); nfc.setRFField(0x00, 0x01); } static void sg_nfc_cmd_radio_off() { sg_res_init(); nfc.setRFField(0x00, 0x00); } static void sg_nfc_cmd_poll() { //卡号发送 uint16_t SystemCode; if (nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, res.mifare_uid, &res.id_len)) { sg_res_init(0x07); res.count = 1; res.type = 0x10; return; } else if (nfc.felica_Polling(0xFFFF, 0x00, res.IDm, res.PMm, &SystemCode, 200) == 1) {//< 0: error sg_res_init(0x13); res.count = 1; res.type = 0x20; res.id_len = 0x10; return; } else { sg_res_init(1); res.count = 0; return; } } static void sg_nfc_cmd_mifare_select_tag() { sg_res_init(); } static void sg_nfc_cmd_aime_authenticate() { sg_res_init(); //AuthenticateBlock(uid,uidLen,block,keyType(A=0,B=1),keyData) if (nfc.mifareclassic_AuthenticateBlock(req.uid, 4, req.block_no, 1, AimeKey)) { return; } else { res.status = 1; } } static void sg_nfc_cmd_bana_authenticate() { sg_res_init(); //AuthenticateBlock(uid,uidLen,block,keyType(A=0,B=1),keyData) if (nfc.mifareclassic_AuthenticateBlock(req.uid, 4, req.block_no, 0, BanaKey)) { return; } else { res.status = 1; } } static void sg_nfc_cmd_mifare_read_block() {//读取卡扇区数据 if (nfc.mifareclassic_ReadDataBlock(req.block_no, res.block)) { sg_res_init(0x10); return; } sg_res_init(); res.status = 1; } static void sg_nfc_cmd_felica_encap() { uint16_t SystemCode; if (nfc.felica_Polling(0xFFFF, 0x01, res.encap_IDm, res.poll_PMm, &SystemCode, 200) == 1) { SystemCode = SystemCode >> 8 | SystemCode << 8;//SystemCode,大小端反转注意 } else { sg_res_init(); res.status = 1; return; } uint8_t code = req.encap_code; res.encap_code = code + 1; switch (code) { case FELICA_CMD_POLL: { sg_res_init(0x14); res.poll_systemCode[0] = SystemCode; res.poll_systemCode[1] = SystemCode >> 8; } break; case FELICA_CMD_GET_SYSTEM_CODE: { sg_res_init(0x0D); res.felica_payload[0] = 0x01;//未知 res.felica_payload[1] = SystemCode;//SystemCode res.felica_payload[2] = SystemCode >> 8; } break; case FELICA_CMD_NDA_A4: { sg_res_init(0x0B); res.felica_payload[0] = 0x00; } break; case FELICA_CMD_NDA_06: { uint16_t serviceCodeList[1] = {(uint16_t)(req.serviceCodeList[1] << 8 | req.serviceCodeList[0])};//大小端反转注意 for (uint8_t i = 0; i < req.numBlock; i++) { uint16_t blockList[1] = {(uint16_t)(req.blockList[i][0] << 8 | req.blockList[i][1])}; if (nfc.felica_ReadWithoutEncryption(1, serviceCodeList, 1, blockList, res.blockData[i]) != 1) { memset(res.blockData[i], 0, 16);//dummy data } } res.RW_status[0] = 0; res.RW_status[1] = 0; res.numBlock = req.numBlock; sg_res_init(0x0D + req.numBlock * 16); } break; case FELICA_CMD_NDA_08: { sg_res_init(0x0C);//此处应有写入卡,但是不打算实现 res.RW_status[0] = 0; res.RW_status[1] = 0; } break; default: sg_res_init(); res.status = 1; } res.encap_len = res.payload_len; }