1
0
mirror of synced 2024-11-30 18:34:38 +01:00
Arduino-Aime-Reader/tools/ReaderTest/ReaderTest.ino

138 lines
4.0 KiB
C++

#if defined(__AVR_ATmega32U4__) || defined(ARDUINO_SAMD_ZERO)
#pragma message "当前的开发板是 ATmega32U4 或 SAMD_ZERO"
#define SerialDevice SerialUSB
#define PN532_SPI_SS 10 //32U4 不使用 SPI 时,执行 ReadWithoutEncryption 会失败
#elif defined(ARDUINO_ESP8266_NODEMCU_ESP12E)
#pragma message "当前的开发板是 NODEMCU_ESP12E"
#define SerialDevice Serial
#elif defined(ARDUINO_NodeMCU_32S)
#pragma message "当前的开发板是 NodeMCU_32S"
#define SerialDevice Serial
#define PN532_SPI_SS 5
#else
#error "未经测试的开发板,请检查串口和阵脚定义"
#endif
#if defined(PN532_SPI_SS)
#pragma message "使用 SPI 连接 PN532"
#include <SPI.h>
#include <PN532_SPI.h>
PN532_SPI pn532(SPI, PN532_SPI_SS);
#else
#include <Wire.h>
#include <PN532_I2C.h>
PN532_I2C pn532(Wire);
#endif
#include "PN532.h"
PN532 nfc(pn532);
typedef union {
uint8_t block[18];
struct {
uint8_t IDm[8];
uint8_t PMm[8];
union {
uint16_t SystemCode;
uint8_t System_Code[2];
};
};
} Card;
Card card;
uint8_t AimeKey[6] = {0x57, 0x43, 0x43, 0x46, 0x76, 0x32};
uint8_t BanaKey[6] = {0x60, 0x90, 0xD0, 0x06, 0x32, 0xF5};
uint8_t MifareKey[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
#define M2F_B 1
uint16_t blockList[4] = {0x8080, 0x8081, 0x8082, 0x8083};
uint16_t serviceCodeList[1] = {0x000B};
uint8_t blockData[1][16];
void setup() {
SerialDevice.begin(115200);
// Wire.setClock(800000);
while (!SerialDevice);
nfc.begin();
while (!nfc.getFirmwareVersion()) {
SerialDevice.println("Didn't find PN53x board");
delay(500);
}
SerialDevice.println("START!");
nfc.setPassiveActivationRetries(0x10);
nfc.SAMConfig();
}
void loop() {
uint8_t uid[4], uL;
if (nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uL) && nfc.mifareclassic_AuthenticateBlock(uid, uL, 1, 1, AimeKey)) {
SerialDevice.println("Aime card!");
SerialDevice.print("UID Value:");
nfc.PrintHex(uid, uL);
SerialDevice.print("Block 2 Data:");
if (nfc.mifareclassic_ReadDataBlock(2, card.block)) {
nfc.PrintHex(card.block, 16);
}
delay(2000);
return;
}
if (nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uL) && nfc.mifareclassic_AuthenticateBlock(uid, uL, 1, 0, BanaKey)) {
SerialDevice.println("Banapassport card!");
SerialDevice.print("UID Value:");
nfc.PrintHex(uid, uL);
SerialDevice.print("Block 2 Data:");
if (nfc.mifareclassic_ReadDataBlock(2, card.block)) {
nfc.PrintHex(card.block, 16);
}
delay(2000);
return;
}
if (nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uL) && nfc.mifareclassic_AuthenticateBlock(uid, uL, M2F_B, 0, MifareKey)) {
SerialDevice.println("Default Key Mifare!");
if (nfc.mifareclassic_ReadDataBlock(2, card.block)) {
SerialDevice.print("Fake IDm:");
nfc.PrintHex(card.IDm, 8);
SerialDevice.print("Fake PMm:");
nfc.PrintHex(card.PMm, 8);
}
delay(2000);
return;
}
if (nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uL)) {
SerialDevice.println("Unknown key Mifare.");
SerialDevice.print("UID Value:");
nfc.PrintHex(uid, uL);
delay(2000);
return;
}
if (nfc.felica_Polling(0xFFFF, 0x01, card.IDm, card.PMm, &card.SystemCode, 200)) {
SerialDevice.println("FeliCa card!");
SerialDevice.print("IDm:");
nfc.PrintHex(card.IDm, 8);
SerialDevice.print("PMm:");
nfc.PrintHex(card.PMm, 8);
SerialDevice.print("SystemCode:");
card.SystemCode = card.SystemCode >> 8 | card.SystemCode << 8;
nfc.PrintHex(card.System_Code, 2);
Serial.println("FeliCa Block:");
for (uint8_t i = 0; i < 4; i++) {
if (nfc.felica_ReadWithoutEncryption(1, serviceCodeList, 1, &blockList[i], blockData) == 1) {
Serial.println(blockList[i], HEX);
nfc.PrintHex(blockData[0], 16);
} else {
Serial.println("error");
}
}
delay(2000);
return;
}
SerialDevice.println("Didn't find card");
delay(500);
}