1
0
mirror of synced 2024-11-24 05:40:10 +01:00
lindbergh-loader/docs/lindbergh.conf

72 lines
2.0 KiB
Plaintext
Raw Normal View History

2022-07-20 20:58:57 +02:00
# SEGA Lindbergh Emulator Configuration File
# Written by Bobby Dilley
2022-12-29 11:15:27 +01:00
# Set the colour of the lindbergh to change the Segaboot logo
# Possibly colours are: YELLOW and RED
LINDBERGH_COLOUR YELLOW
2022-12-28 13:28:56 +01:00
# Choice of resolutions
# 640 x 480
# 800 x 600
# 1024 x 768
# 1280 x 1024
# 800 x 480
# 1024 x 600
# 1280 x 768
# 1360 x 768
2022-07-20 20:58:57 +02:00
# Set the requested dip switch width here
WIDTH 640
# Set the requested dip switch height here
2022-07-20 22:15:25 +02:00
HEIGHT 480
2022-07-20 20:58:57 +02:00
# Set if the emulator should emulate the rideboard used in the special games here
2022-07-20 22:15:25 +02:00
# If this is set to 0, then the emulator will route the traffic to the serial device
# defined in RIDEBOARD_PATH if it has been defined.
2023-12-03 11:38:34 +01:00
# EMULATE_RIDEBOARD 0
2022-07-20 20:58:57 +02:00
# Set if the emulator should emulate the driveboard used in driving games here
2022-07-20 22:15:25 +02:00
# If this is set to 0, then the emulator will route the traffic to the serial device
# defined in DRIVEBOARD_PATH if it has been defined.
2023-12-03 11:38:34 +01:00
# EMULATE_DRIVEBOARD 0
2022-07-20 20:58:57 +02:00
# Set if the emulator should emulate the motion board from Outrun 2 SP SDX here
2022-07-20 22:15:25 +02:00
# If this is set to 0, then the emulator will route the traffic to the serial device
# defined in MOTIONBOARD_PATH if it has been defined.
2023-12-03 11:38:34 +01:00
# EMULATE_MOTIONBOARD 0
2022-07-20 20:58:57 +02:00
# Set if the emulator should emulate JVS and use the keyboard/mouse for controls.
2022-07-20 22:15:25 +02:00
# If this is set to 0, then the emulator will route the traffic to the serial device
# defined in RIDEBOARD_PATH if it has been defined.
2023-12-03 11:38:34 +01:00
# EMULATE_JVS 1
2022-07-20 20:58:57 +02:00
# Define the path to pass the JVS packets to
2022-07-20 22:15:25 +02:00
# JVS_PATH /dev/ttyUSB0
# Define the path to pass the rideboard packets to
# RIDEBOARD_PATH /dev/ttyUSB0
# Define the path to pass the driveboard packets to
# DRIVEBOARD_PATH /dev/ttyUSB0
# Define the path to pass the motionboard packets to
# MOTIONBOARD_PATH /dev/ttyUSB0
2022-07-20 20:58:57 +02:00
# Set if the emulator should go full screen
2023-12-03 11:38:34 +01:00
# FULLSCREEN 0
# Patches a function at an address to return a number
# PATCH_RETURN A0000 1
# Patches a memory location to the following
# PATCH A0000 909090
2023-12-04 08:08:38 +01:00
# Set the Region ( JP/US/EX )
2023-12-04 08:15:58 +01:00
# REGION US
2023-12-04 08:08:38 +01:00
# Set if you want the game to be Free Play
2023-12-04 08:15:58 +01:00
# FREEPLAY 1