From 73507f4a1e93d7012beba8f17147b3916972742e Mon Sep 17 00:00:00 2001
From: Bobby Dilley <bobby@dilley.uk>
Date: Sat, 24 Feb 2024 20:34:09 +0000
Subject: [PATCH] Comment out all lindbergh conf file entries by deault

---
 docs/lindbergh.conf | 40 ++++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/docs/lindbergh.conf b/docs/lindbergh.conf
index 8f577cc..a500e01 100644
--- a/docs/lindbergh.conf
+++ b/docs/lindbergh.conf
@@ -3,7 +3,7 @@
 
 # Set the colour of the lindbergh to change the Segaboot logo
 # Possible colours are: YELLOW and RED
-LINDBERGH_COLOUR YELLOW
+# LINDBERGH_COLOUR YELLOW
 
 # Choice of resolutions
 #  640 x 480
@@ -16,54 +16,54 @@ LINDBERGH_COLOUR YELLOW
 # 1360 x 768
 
 # Set the requested dip switch width here
-WIDTH 640
+# WIDTH 640
 
 # Set the requested dip switch height here
-HEIGHT 480
+# HEIGHT 480
 
 # Set if the emulator should emulate JVS and use the keyboard/mouse for controls.
 # If this is set to 0, then the emulator will route the traffic to the serial device
 # defined in RIDEBOARD_PATH if it has been defined.
-EMULATE_JVS 1
+# EMULATE_JVS 0
 
 # Set if the emulator should emulate the rideboard used in the special games here
 # If this is set to 0, then the emulator will route the traffic to the serial device
 # defined in RIDEBOARD_PATH if it has been defined.
-EMULATE_RIDEBOARD 0
+# EMULATE_RIDEBOARD 1
 
 # Set if the emulator should emulate the driveboard used in driving games here
 # If this is set to 0, then the emulator will route the traffic to the serial device
 # defined in DRIVEBOARD_PATH if it has been defined.
-EMULATE_DRIVEBOARD 0
+# EMULATE_DRIVEBOARD 1
 
 # Set if the emulator should emulate the motion board from Outrun 2 SP SDX here
 # If this is set to 0, then the emulator will route the traffic to the serial device
 # defined in MOTIONBOARD_PATH if it has been defined.
-EMULATE_MOTIONBOARD 0
+# EMULATE_MOTIONBOARD 1
 
-# Define the path to pass the JVS packets to
-JVS_PATH /dev/ttyUSB0
+# Define the path to pass the JVS packets to if JVS is not being emulated.
+# JVS_PATH /dev/ttyUSB0
 
-# Define the path to pass the first serial port to
-SERIAL_1_PATH /dev/ttyUSB0
+# Define the path to pass the first serial port to if it's not being emulated.
+# SERIAL_1_PATH /dev/ttyUSB0
 
-# Define the path to pass the second serial port to
-SERIAL_2_PATH /dev/ttyUSB0
+# Define the path to pass the second serial port to if it's not being emulated.
+# SERIAL_2_PATH /dev/ttyUSB0
 
 # Define the path to the sram.bin file
-SRAM_PATH sram.bin
+# SRAM_PATH sram.bin
 
 # Define the path to the eeprom.bin file
-EEPROM_PATH eeprom.bin
+# EEPROM_PATH eeprom.bin
 
 # Set if the emulator should go full screen
-FULLSCREEN 0
+# FULLSCREEN 0
 
 # Set the Region ( JP/US/EX )
-REGION EX
+# REGION EX
 
 # Set if you want the game to be Free Play
-FREEPLAY 1
+# FREEPLAY 1
 
-# Set if you want to see degug messages in the console
-DEBUG_MSGS 0
+# Set if you want to see debug messages in the console
+# DEBUG_MSGS 1