44 lines
1.5 KiB
Plaintext
44 lines
1.5 KiB
Plaintext
# SEGA Lindbergh Emulator Configuration File
|
|
# Written by Bobby Dilley
|
|
|
|
# Set the requested dip switch width here
|
|
WIDTH 640
|
|
|
|
# Set the requested dip switch height here
|
|
HEIGHT 480
|
|
|
|
# Set if the emulator should emulate the rideboard used in the special games here
|
|
# If this is set to 0, then the emulator will route the traffic to the serial device
|
|
# defined in RIDEBOARD_PATH if it has been defined.
|
|
EMULATE_RIDEBOARD 0
|
|
|
|
# Set if the emulator should emulate the driveboard used in driving games here
|
|
# If this is set to 0, then the emulator will route the traffic to the serial device
|
|
# defined in DRIVEBOARD_PATH if it has been defined.
|
|
EMULATE_DRIVEBOARD 0
|
|
|
|
# Set if the emulator should emulate the motion board from Outrun 2 SP SDX here
|
|
# If this is set to 0, then the emulator will route the traffic to the serial device
|
|
# defined in MOTIONBOARD_PATH if it has been defined.
|
|
EMULATE_MOTIONBOARD 0
|
|
|
|
# Set if the emulator should emulate JVS and use the keyboard/mouse for controls.
|
|
# If this is set to 0, then the emulator will route the traffic to the serial device
|
|
# defined in RIDEBOARD_PATH if it has been defined.
|
|
EMULATE_JVS 1
|
|
|
|
# Define the path to pass the JVS packets to
|
|
# JVS_PATH /dev/ttyUSB0
|
|
|
|
# Define the path to pass the rideboard packets to
|
|
# RIDEBOARD_PATH /dev/ttyUSB0
|
|
|
|
# Define the path to pass the driveboard packets to
|
|
# DRIVEBOARD_PATH /dev/ttyUSB0
|
|
|
|
# Define the path to pass the motionboard packets to
|
|
# MOTIONBOARD_PATH /dev/ttyUSB0
|
|
|
|
# Set if the emulator should go full screen
|
|
FULLSCREEN 0
|