SEGAy/waccamole
1
0
Fork 0
mirror of synced 2024-11-24 06:40:13 +01:00
Code Releases Activity

Update README.md

Browse Source
This commit is contained in:
jbamuro 2022-12-21 00:41:11 -08:00 committed by GitHub
parent f75b5b0882
commit 7a6bbdeed8
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 8 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
README.md
View File

@ -225,9 +225,14 @@ Get some solder paste and apply it to the PCB using the stencil (spread over ste
### Replacing the board on the touch panel ### Replacing the board on the touch panel
Remove the control panel with single screw on the left and right side. You don't need to remove the acrylic, just unplug the harnesses. Unplug, feed them up, slide the control panel out. Remove the control panel with single screw on the left and right side.
https://cdn.discordapp.com/attachments/780283383069540393/1054935055333605457/PXL_20221221_013513863.jpg https://cdn.discordapp.com/attachments/780283383069540393/1054935055333605457/PXL_20221221_013513863.jpg
You don't need to remove the acrylic, just unplug the harnesses. Unplug, feed them up, slide the control panel out.
https://cdn.discordapp.com/attachments/780283383069540393/1054948737845301338/PXL_20221221_022911966.jpg
After you have the outside plastic pieces taken off, disconnect the led data only wires, LED power on the middle LED board, and the touch board cable. Then remove the two outside screws for the panel and pull it straight out After you have the outside plastic pieces taken off, disconnect the led data only wires, LED power on the middle LED board, and the touch board cable. Then remove the two outside screws for the panel and pull it straight out
https://cdn.discordapp.com/attachments/780283383069540393/1054930972799414382/image.png https://cdn.discordapp.com/attachments/780283383069540393/1054930972799414382/image.png
@ -241,6 +246,8 @@ Place in the new PCB and screw everything back together
Tip: You can "grip" the ribbon to feed it back through the hole to get it back into the pcb by using painter's tape. Tip: You can "grip" the ribbon to feed it back through the hole to get it back into the pcb by using painter's tape.
Be gentle here though, broken ribbons are no fun. Be gentle here though, broken ribbons are no fun.
Note: You may need to remove the pop / marquee to get to the touch panels on the top of the machine. This may require security torx bits (not all cabs have security torx for some reason)
If the cab is powered on you will need to go to "connection test of touch devices " and "reconnect touch devices" in the test menu after re-connecting the touch board If the cab is powered on you will need to go to "connection test of touch devices " and "reconnect touch devices" in the test menu after re-connecting the touch board
Video instructions: https://youtu.be/iyhxQFl7XyE Video instructions: https://youtu.be/iyhxQFl7XyE