SEGAy/waccamole
1
0
Fork 0
mirror of synced 2024-11-23 22:30:58 +01:00
Code Releases Activity

Merge pull request #1 from Ari-VRC/main

Browse Source 
Update README.md
This commit is contained in:
jbamuro 2023-08-20 00:14:47 -07:00 committed by GitHub
commit c242bde15d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 21 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
README.md
View File

@ -143,8 +143,28 @@ https://ie.rs-online.com/web/p/pcb-headers/8960809
<b>LED Data board (14-1497-R)</b>
<br><img src="https://github.com/jbamuro/waccamole/raw/main/img/DSC00813.JPG" data-canonical-src="https://github.com/jbamuro/waccamole/raw/main/img/DSC00813.JPG" width="150" height="150"/> <br>
This sends the pretty colors to the touch controller and card reader panel?
This sends the pretty colors to the touch controller.
Attempts to swap the board to an Adafruit FT232H breakout board to replace LED driver ongoing, Wacca LED tests pass fine, but no data seems to be sent out from pin 14.
```
IC1: FTDI FT232HL - Single Channel HiSpeed USB to Multipurpose UART/FIFO IC
Datasheet: https://ftdichip.com/wp-content/uploads/2020/07/DS_FT232H.pdf
IC2: (93lc56b 6 pin?) eeprom for USB descriptor and VID/PID
Datasheet: https://www.microchip.com/en-us/product/93lc56b
IC3: B86J (sn74ahct1g86) Single 2-Input XOR Gate
Datasheet: https://www.ti.com/lit/ds/symlink/sn74ahct1g86.pdf
Additional info:
IC3 Pin# 1 - MOSI from FT232HL (Pin 14)
IC3 Pin# 2 - trace runs to one pad of R10, through R11 (10k ohm resistor), to ground
IC3 Pin# 3 - Ground
IC3 Pin# 4 - LED data out into R12 (100 ohm resistor) to CN2 (LED Data/Ground out)
IC3 Pin# 5 - (5v?) VCC in
```
<b>2.1 channel AMP (14-1466CR) </b>
<br><img src="https://github.com/jbamuro/waccamole/raw/main/img/DSC00816.JPG" data-canonical-src="https://github.com/jbamuro/waccamole/raw/main/img/DSC00816.JPG" width="150" height="150"/> <br>