segatools-dniel97/idzio/xi.c

#include <windows.h>
#include <xinput.h>

#include <math.h>
#include <assert.h>
#include <stdbool.h>
#include <stdint.h>

#include "idzio/backend.h"
#include "idzio/config.h"
#include "idzio/idzio.h"
#include "idzio/shifter.h"
#include "idzio/xi.h"

#include "util/dprintf.h"

static void idz_xi_jvs_read_buttons(uint8_t *gamebtn_out);
static void idz_xi_jvs_read_shifter(uint8_t *gear);
static void idz_xi_jvs_read_analogs(struct idz_io_analog_state *out);

static HRESULT idz_xi_config_apply(const struct idz_xi_config *cfg);

static const struct idz_io_backend idz_xi_backend = {
    .jvs_read_buttons   = idz_xi_jvs_read_buttons,
    .jvs_read_shifter   = idz_xi_jvs_read_shifter,
    .jvs_read_analogs   = idz_xi_jvs_read_analogs,
};

static bool idz_xi_single_stick_steering;
static bool idz_xi_linear_steering;
static uint16_t idz_xi_left_stick_deadzone;
static uint16_t idz_xi_right_stick_deadzone;

const uint16_t max_stick_value = 32767;
/* Apply steering wheel restriction. Real cabs only report about 76% of
    the output value when the wheel is turned to either of its maximum positions. */
const uint16_t max_wheel_value = 24831;

HRESULT idz_xi_init(const struct idz_xi_config *cfg, const struct idz_io_backend **backend)
{
    HRESULT hr;
    assert(cfg != NULL);
    assert(backend != NULL);

    hr = idz_xi_config_apply(cfg);

    if (FAILED(hr)) {
        return hr;
    }

    dprintf("XInput: Using XInput controller\n");
    *backend = &idz_xi_backend;

    return S_OK;
}

static HRESULT idz_xi_config_apply(const struct idz_xi_config *cfg) {
    /* Deadzones check */
    if (cfg->left_stick_deadzone > 32767 || cfg->left_stick_deadzone < 0) {
        dprintf("XInput: Left stick deadzone is too large or negative\n");
        return E_INVALIDARG;
    }

    if (cfg->right_stick_deadzone > 32767 || cfg->right_stick_deadzone < 0) {
        dprintf("XInput: Right stick deadzone is too large or negative\n");
        return E_INVALIDARG;
    }

    dprintf("XInput: --- Begin configuration ---\n");
    dprintf("XInput: Single Stick Steering : %i\n", cfg->single_stick_steering);
    dprintf("XInput: Linear Steering . . . : %i\n", cfg->linear_steering);
    dprintf("XInput: Left Deadzone . . . . : %i\n", cfg->left_stick_deadzone);
    dprintf("XInput: Right Deadzone  . . . : %i\n", cfg->right_stick_deadzone);
    dprintf("XInput: ---  End  configuration ---\n");

    idz_xi_single_stick_steering = cfg->single_stick_steering;
    idz_xi_linear_steering = cfg->linear_steering;
    idz_xi_left_stick_deadzone = cfg->left_stick_deadzone;
    idz_xi_right_stick_deadzone = cfg->right_stick_deadzone;

    return S_OK;
}

static void idz_xi_jvs_read_buttons(uint8_t *gamebtn_out)
{
    uint8_t gamebtn;
    XINPUT_STATE xi;
    WORD xb;

    assert(gamebtn_out != NULL);

    gamebtn = 0;

    memset(&xi, 0, sizeof(xi));
    XInputGetState(0, &xi);
    xb = xi.Gamepad.wButtons;

    if (xb & XINPUT_GAMEPAD_DPAD_UP) {
        gamebtn |= IDZ_IO_GAMEBTN_UP;
    }

    if (xb & XINPUT_GAMEPAD_DPAD_DOWN) {
        gamebtn |= IDZ_IO_GAMEBTN_DOWN;
    }

    if (xb & XINPUT_GAMEPAD_DPAD_LEFT) {
        gamebtn |= IDZ_IO_GAMEBTN_LEFT;
    }

    if (xb & XINPUT_GAMEPAD_DPAD_RIGHT) {
        gamebtn |= IDZ_IO_GAMEBTN_RIGHT;
    }

    if (xb & (XINPUT_GAMEPAD_START | XINPUT_GAMEPAD_A)) {
        gamebtn |= IDZ_IO_GAMEBTN_START;
    }

    if (xb & (XINPUT_GAMEPAD_BACK | XINPUT_GAMEPAD_B)) {
        gamebtn |= IDZ_IO_GAMEBTN_VIEW_CHANGE;
    }

    *gamebtn_out = gamebtn;
}

static void idz_xi_jvs_read_shifter(uint8_t *gear)
{
    bool shift_dn;
    bool shift_up;
    XINPUT_STATE xi;
    WORD xb;

    assert(gear != NULL);

    memset(&xi, 0, sizeof(xi));
    XInputGetState(0, &xi);
    xb = xi.Gamepad.wButtons;

    if (xb & XINPUT_GAMEPAD_START) {
        /* Reset to Neutral when start is pressed */
        idz_shifter_reset();
    }

    shift_dn = xb & (XINPUT_GAMEPAD_Y | XINPUT_GAMEPAD_LEFT_SHOULDER);
    shift_up = xb & (XINPUT_GAMEPAD_X | XINPUT_GAMEPAD_RIGHT_SHOULDER);

    idz_shifter_update(shift_dn, shift_up);

    *gear = idz_shifter_current_gear();
}

static int16_t calculate_norm_steering(int16_t axis, uint16_t deadzone, bool linear_steering) {
    // determine how far the controller is pushed
    float magnitude = sqrt(axis*axis);

    // determine the direction the controller is pushed
    float norm_axis = axis / magnitude;

    float norm_magnitude = 0.0;

    // check if the controller is outside a circular dead zone
    if (magnitude > deadzone)
    {
        // clip the magnitude at its expected maximum value
        if (magnitude > max_stick_value) magnitude = max_stick_value;

        // adjust magnitude relative to the end of the dead zone
        magnitude -= deadzone;

        // optionally normalize the magnitude with respect to its expected range
        // giving a magnitude value of 0.0 to 1.0
        norm_magnitude = magnitude / (max_stick_value - deadzone);
    } else // if the controller is in the deadzone zero out the magnitude
    {
        magnitude = 0.0;
        norm_magnitude = 0.0;
    }

    // apply non-linear transform to the axis
    if (!linear_steering) {
        return norm_axis * pow(norm_magnitude, 3.0) * max_wheel_value;
    }

    return norm_axis * norm_magnitude * max_wheel_value;
}

static void idz_xi_jvs_read_analogs(struct idz_io_analog_state *out)
{
    XINPUT_STATE xi;
    int left;
    int right;

    assert(out != NULL);

    memset(&xi, 0, sizeof(xi));
    XInputGetState(0, &xi);

    left = xi.Gamepad.sThumbLX;
    right = xi.Gamepad.sThumbRX;
    
    // normalize the steering axis
    left = calculate_norm_steering(left, idz_xi_left_stick_deadzone, idz_xi_linear_steering);
    right = calculate_norm_steering(right, idz_xi_right_stick_deadzone, idz_xi_linear_steering);

    if(idz_xi_single_stick_steering) {
        out->wheel = left;
    } else {
        out->wheel = (left + right) / 2;
    }

    out->accel = xi.Gamepad.bRightTrigger << 8;
    out->brake = xi.Gamepad.bLeftTrigger << 8;
}