Tau
93fcdf8f6d
board/io3.c: Add io3_to_jvs_node() accessor
2019-11-03 13:00:55 -05:00
Tau
879dc0bfb4
Use new iohook_open_nul_fd() API
...
Makes error handling more consistent
2019-11-03 11:02:54 -05:00
Tau
2b5bde7742
board: Naming convention change for "sg" bus
2019-10-26 18:25:04 -04:00
Tau
5ed6eaa203
Overhaul card reader emulation
2019-10-19 15:51:10 -04:00
Tau
bbbb6d08b0
board/vfd.c: Use dump_iobuf() instead of direct dump()
2019-10-13 13:35:43 -04:00
Tau
32c87ca37e
board/io4.c: Include NT IOCTL header
...
Fixes non-PCH build.
2019-09-01 11:48:32 -04:00
Tau
61c7905a32
board/vfd.c: Add stub emu for "VFD" LCD
2019-08-30 19:05:23 -04:00
Tau
6c5673dd24
board/io4.c: Add initial emulator for USB-mode IO-4
2019-08-30 18:49:11 -04:00
Tau
9ea6e09fdc
Tweak JVS coin count APIs
...
This makes things more consistent with the button/analog APIs.
2019-08-03 17:41:39 -04:00
Tau
e06be9fc7b
board/sg-reader.c: Configurate sg_reader
2019-06-03 22:28:44 -04:00
Tau
924c1d8fdb
board/config.c: Add struct aime_config
2019-06-03 22:28:06 -04:00
Tau
b172c22322
board/sg-reader.c: Streamline further
...
Remove remaining pointless boilerplate, turn it into a free-
standing hook, since its aimeio.dll dependency forces it to be a
singleton anyway.
2019-05-03 21:23:21 -04:00
Tau
8158d01ed9
board/io3.c: Tweak ADC polling interface
2019-05-03 21:23:21 -04:00
Tau
23257f272e
board/slider-cmd: Simplify RGB message def
2019-05-02 22:11:54 -04:00
Tau
ee39a94bde
board/io3.c: Add capabilities comment
2019-05-02 19:41:04 -04:00
Tau
0271abb21e
board/io3.c: Fix JVS coin counter emulation
2019-05-02 19:38:39 -04:00
Tau
025102fc58
Remove PCH source files
...
Deprecated in newer versions of Meson.
2019-05-01 21:17:30 -04:00
Tau
27663b4b19
board/sg-reader.c: Push down aimeio.dll calls
...
This is kind of a layer break but the alternative is way too much
boilerplate to deal with.
2019-03-16 11:42:36 -04:00
Tau
463d55cddc
board/io3.c: Use IO-4 GPIO output count
...
Supposedly the IO-4's JVS interface presents the exact same
capabilities as the IO-3 except that it purports to have a massive
number of GPIO outputs (20 ports, each port having 8 bits). So
we'll just make our emulated IO-3 look like an IO-4 then.
2019-03-08 10:07:48 -05:00
Tau
5eef0455a2
board/io3.c: Fix analog input endianness
2019-03-08 10:07:48 -05:00
Tau
0806282bbf
board/guid.c: Add HID class GUID
2019-03-04 16:47:32 -05:00
Tau
bc2928804c
board/sg-reader.c: Factor out NFC ass'y emu
...
Combine the NFC module emulator with the LED module emulator and
a virtual UART to build a higher-level reusable building block.
2019-02-26 13:49:29 -05:00
Tau
2cbb18604b
board/sg-led.c: Remove error path from update cmd
...
No way to return it to the host application anyway since this
command is unacknowledged.
2019-02-26 13:49:29 -05:00
Tau
8606d17699
board/sg-nfc.c: Pass UID consistently
...
If we receive it from the upper ops layer then we should send it
back as well.
2019-02-26 13:49:29 -05:00
Tau
bbe085b73d
board/slider-cmd.h: Add separate Diva LED cmd
...
The Chunithm slider has sixteen cells and fifteen (I think?)
vertical lines splitting the cells. Diva does not have these lines,
so presumably the LED data format is different. Need to analyze
this further.
2019-02-26 13:49:29 -05:00
Tau
05ccf363d9
board/meson.build: Fix sorting
2019-02-26 13:49:29 -05:00
Tau
8036ff71ec
board: Factor out Chunithm slider
2019-01-26 12:05:37 -05:00
Tau
ee011a74d4
Make dprintfs 64-bit clean
2018-12-17 17:34:50 -05:00
Tau
755be05603
board/sg-nfc.c: Use non-hardcoded UID
...
Turns out this does in fact vary between cards, even though its
actual value is unimportant.
2018-12-17 17:34:50 -05:00
Tau
51e4eca7dd
Add MSVC PCH support
2018-11-23 18:25:22 -05:00
Tau
0cbd950289
Fix non-PCH build
2018-11-23 14:37:42 -05:00
Tau
1630784c3d
board/sg-led.c: Implement RGB LED support
...
Used by AiMe reader, possibly used elsewhere.
2018-11-20 20:33:17 -05:00
Tau
4936fc2bcc
board/sg-nfc.c: Add initial emu for NFC board
...
This board also supports FeliCa and probably some other stuff.
Need to analyze and implement these features later, Mifare card
support only for now.
2018-11-20 20:33:17 -05:00
Tau
0135236209
board/sg-cmd.c: Add "sg" req/resp packets
2018-11-20 20:33:17 -05:00
Tau
b8ffd20877
board/sg-frame.c: Add "sg" framing support
2018-11-20 20:33:17 -05:00
Tau
9f43f9f397
Hoist slider from board into chunihook
...
Diva slider uses the quasi-JVS framing used by all other SEGA
boards, the Chunithm slider is a special case.
2018-11-20 20:33:17 -05:00
Tau
2440be1cbf
board/io3.c: Handle short reads/writes
2018-11-20 20:33:17 -05:00
Tau
acfa53fc5c
board/slider-cmd.h: Add commands for touch slider PCB
2018-11-20 20:33:17 -05:00
Tau
5a7d549434
board/slider-frame.c: Add framing for touch slider PCB
2018-11-20 20:33:17 -05:00
Tau
372868565e
board/io3.c: Add SEGA "Type 3" JVS I/O emulator
2018-11-20 20:33:17 -05:00
Tau
f05348fb9d
board: Add empty static library
2018-11-20 20:33:17 -05:00
