KIT!
3bd1d7338c
Reading card 3 and above resulted in an off by one error that always threw a "this line isn't X bytes long" error. Readername now always gets properly loaded from config : I've added comments in the config file to make it obvious what each line does but that fucked up the reader name config. i'm now discarding the comment after loading the line. Updated readme.md
2.8 KiB
AimeIO CardReader
This allows you to a smartcard reader (specifically the acr122u) with segatools
This has only been confirmed working with Chunithm Sun and Sun + so far. Luminous doesn't seem to work yet !
Acknowledgments
This is a plugin destined to be used with Dniel97's segatools fork (but should work on others too).
SmartCard implementation taken from spicetools
Initial project made by nat
All the logic for reading cards from a file has been taken from CrazyRedMachine's RedBoard aimeio.
Usage
Make sure to install the ACR122U's driver before using this.
To use it with a game, copy aimeio.dll to your segatools folder and add the following to your segatools.ini:
[aimeio]
path=aimeio.dll ;Path to aimeio.dll
scan=0x0D ;Sets the key which will be used to insert a card in game. The default is 'Return'
;Everything below this line is optional.
readerOptional=1 ;Make reader optional, so that you can still use the keyboard
readerName=ACS ACR122 0 ;Manually select which reader to use
disableBuzzer=1 ;Disable the buzzer
;aimePath="" ;Manually specify an aime.txt file
;felicaPath="" ;Manually specify a felica.txt file
;debug=0 ;Display function calls
Scanning cards
If you scan a newer AIC-based Aime, its FeliCa IDm will be provided to the game. The game will not see the correct "access code," but the IDm should be unique to each card so that particular card can still track your plays.
Inserting cards
By pressing the key you have set in segatools.ini and holding it for a few moments, you will insert a card set in either aime.txt or felica.txt
You can have multiple cards in those files!
By holding a number from 0 to 9 on your keypad, and then holding enter, you can choose what card to insert.
For example...
aime.txt
---
1a7f3e925cb866d45a3b
a5d04d668bc529e35aaa
By only pressing the insert key, you will insert card0, "1a7f3e925cb866d45a3b".
If you hold 1 on your numpad and press the insert key, card1, "a5d04d668bc529e35aaa" will be inserted !
This works for up to 10 cards.
Build
To build this, you'll need two things :
Once you've edited your build64.bat file to point to your local installation of the VS2022 build tools, run build64.bat and the output will be located in bin/aime.dll.