Add files via upload

joypad.ino

@@ -0,0 +1,131 @@
+/*
+   ___         _           _   ___             _
+  / __|___ _ _| |_ _ _ ___| | | __| _ ___ __ _| |__
+ | (__/ _ \ ' \  _| '_/ _ \ | | _| '_/ -_) _` | / /
+  \___\___/_||_\__|_| \___/_| |_||_| \___\__,_|_\_\
+
+  https://hackaday.io/project/170908-control-freak
+
+  Danjovic 2020
+
+  PC Joystick - 12/04/2020
+*/
+#include "HID-Project.h"
+// Button Pinout
+#define BT_0  0 
+#define BT_1  1
+#define BT_2  2
+#define BT_3  3
+#define BT_4  4
+#define BT_5  5 
+#define BT_6  6
+#define BT_7  7
+#define BT_8  8
+#define BT_9  9
+#define BT_10 10
+#define BT_11 21
+#define BT_12 20
+#define BT_13 19
+#define BT_14 18
+#define BT_15 15
+#define BT_16 14
+#define BT_17 16
+uint8_t buttonPins[] = {BT_0, BT_1, BT_2, BT_3, BT_4, BT_5, BT_6, BT_7, BT_8, BT_9, BT_10, BT_11, BT_12, BT_13, BT_14, BT_15, BT_16, BT_17 };
+uint8_t buttonCount = sizeof(buttonPins) / sizeof(buttonPins[0]);
+
+#define holdCaps()    DDRF  = 0xf0
+#define releaseCaps() DDRF  = 0x00
+#define pullupsOff()  PORTF = 0x00
+
+
+//    _ _ _                 _
+//   | (_) |__ _ _ __ _ _ _(_)___ ___
+//   | | | '_ \ '_/ _` | '_| / -_|_-<
+//   |_|_|_.__/_| \__,_|_| |_\___/__/
+//
+#include "HID-Project.h"
+
+#define maxCounts     1024
+#define midRange       200
+
+//#define DEBUG
+
+
+
+//    ___      _
+//   / __| ___| |_ _  _ _ __
+//   \__ \/ -_)  _| || | '_ \
+//   |___/\___|\__|\_,_| .__/
+//                     |_|
+void setup() {
+
+  pullupsOff(); // turn off pullups
+  holdCaps();   // start with caps discharged
+
+    pinMode(BT_0, INPUT_PULLUP);
+    pinMode(BT_1, INPUT_PULLUP);
+    pinMode(BT_2, INPUT_PULLUP);
+    pinMode(BT_3, INPUT_PULLUP);
+    pinMode(BT_4, INPUT_PULLUP);
+    pinMode(BT_5, INPUT_PULLUP);
+    pinMode(BT_6, INPUT_PULLUP);
+    pinMode(BT_7, INPUT_PULLUP);
+    pinMode(BT_8, INPUT_PULLUP);
+    pinMode(BT_9, INPUT_PULLUP);
+    pinMode(BT_10, INPUT_PULLUP);
+    pinMode(BT_11, INPUT_PULLUP);
+    pinMode(BT_12, INPUT_PULLUP);
+    pinMode(BT_13, INPUT_PULLUP);
+    pinMode(BT_14, INPUT_PULLUP);
+    pinMode(BT_15, INPUT_PULLUP);
+    pinMode(BT_16, INPUT_PULLUP);
+    pinMode(BT_17, INPUT_PULLUP);
+   
+  // Sends a clean report to the host. This is important on any Arduino type.
+  Gamepad.begin();
+  
+#if defined (DEBUG)  
+  Serial.begin(9600);
+#endif
+}
+
+
+//    __  __      _        _
+//   |  \/  |__ _(_)_ _   | |   ___  ___ _ __
+//   | |\/| / _` | | ' \  | |__/ _ \/ _ \ '_ \
+//   |_|  |_\__,_|_|_||_| |____\___/\___/ .__/
+//                                      |_|
+void loop() {
+
+  // Start with a clean slate
+  Gamepad.releaseAll(); 
+
+   if (digitalRead(BT_0) == 0) Gamepad.press(1);
+   if (digitalRead(BT_1) == 0) Gamepad.press(2);
+   if (digitalRead(BT_2) == 0) Gamepad.press(3);
+   if (digitalRead(BT_3) == 0) Gamepad.press(4);
+   if (digitalRead(BT_4) == 0) Gamepad.press(5);
+   if (digitalRead(BT_5) == 0) Gamepad.press(6);
+   if (digitalRead(BT_6) == 0) Gamepad.press(7);
+   if (digitalRead(BT_7) == 0) Gamepad.press(8);
+   if (digitalRead(BT_8) == 0) Gamepad.press(9);
+   if (digitalRead(BT_9) == 0) Gamepad.press(10);
+   if (digitalRead(BT_10) == 0) Gamepad.press(11);
+   if (digitalRead(BT_11) == 0) Gamepad.press(12);
+   if (digitalRead(BT_12) == 0) Gamepad.press(13);
+   if (digitalRead(BT_13) == 0) Gamepad.press(14);
+   if (digitalRead(BT_14) == 0) Gamepad.press(15);
+   if (digitalRead(BT_15) == 0) Gamepad.press(16);
+   if (digitalRead(BT_16) == 0) Gamepad.press(17);
+   if (digitalRead(BT_17) == 0) Gamepad.press(18);
+ 
+  Gamepad.write();
+
+#if defined (DEBUG) 
+   
+#endif
+
+  // Simple debounce
+  delay(10);
+
+}